OSG SYSTEM PRODUCTS

Non-Wire Bar Coater Chọn con lăn L 60 Thạc sĩ　L60T

It is a one-piece molding with no wire wrapped around it, so there is no breaking or loosening.
It is resistant to clogging and has excellent washability.

ACTIVE

Mẫu đứng cho Spin Coater (Kích thước bề mặt phù hợp Φ 100 đến 125 mm)

Máy đo độ dày màng

Kiểm tra nhỏ 70

Máy đo độ dày màng

Thiết bị đo độ dày màng khô　455

By cutting the coating surface with a chip with a fixed angle and observing the cut edge with a microscope, the coating thickness can be easily measured.
Suitable for measuring various materials such as iron, non-iron, resin, wood, concrete and pottery.

Thiết bị đo độ dày màng cho mẹo thay thế khô số 1　

Thiết bị đo độ dày màng cho đầu thay thế khô số 4　

Thiết bị đo độ dày màng cho đầu thay thế khô số 5　

Thiết bị đo độ dày màng cho mẹo thay thế khô số 6　

JFE Advantech

Ultrasonic Thickness Gauge

JFE Advantech

Ultrasonic Thickness Gauge with English Calibration Certificate　TI-70L

Measurements can be made only by touching the probe from one side, and thickness can be measured non-destructively.
It can be used immediately by adjusting the zero point and sound speed.

JFE Advantech

Ultrasonic Thickness Gauge with Chinese Calibration Certificate　TI-70L

Measurements can be made only by touching the probe from one side, and thickness can be measured non-destructively.
It can be used immediately by adjusting the zero point and sound speed.

ACTIVE

Bộ phận quay ACT-220AII (Đơn vị chính)

ACTIVE

Spin Coater ACT-220AII Bơm hút chân không (Đối với Substrate Sucking)

FICHER INSTRUMENTS

Pocketable nhỏ phim dày Meter Built-in thăm dò loại

FICHER INSTRUMENTS

Pocketable Small Film Thickness Meter Integrated Probe Type USB Connection with English Calibration Certificate　DUALSCOPEMP0R-FP

Both electromagnetic and eddy current (automatic switching) type.
The eddy current method is suitable for measuring non-magnetic coatings on non-magnetic metals (anodized aluminum, Cu, stainless steel insulating coatings, paint, etc.).

FICHER INSTRUMENTS

Pocketable Small Film Thickness Meter Integrated Probe Type USB Connection with Chinese Calibration Certificate　DUALSCOPEMP0R-FP

Both electromagnetic and eddy current (automatic switching) type.
The eddy current method is suitable for measuring non-magnetic coatings on non-magnetic metals (anodized aluminum, Cu, stainless steel insulating coatings, paint, etc.).

Bàn kính có kẹp 254 x 355mm　10x14

It is a glass table for coating with an applicator or barcoater.
It has a clamp so you can pinch the specimen.

Máy cắt không dây khoảng. φ76,2μm

Người phục vụ nòng súng. φ76,2μm

TQC Sheen

Wet Film Thickness Gauge　LD2030

The gauge is applied vertically on the undried paint film and the film thickness is measured by reading where the paint is applied.

TQC Sheen

Square wet film thickness gauge measuring range: 20 ~ 370 micrometers

TQC Sheen

Wet film thickness measuring instrument measuring range: 0 ~ 100 micrometers

FIB Sample Table for Sample Preparation Fine Grid Molybdenum 25 Pieces

CUSTOM corporation

【With calibration certificate in English attached】Ultrasonic Thickness Meter STG-02　STG-02

Can measure the thickness of various materials from metals to non-metals.
The thickness is calculated by measuring the time (propagation time) when the ultrasonic wave output from the probe enters the object to be measured and returns to the opposite surface.

CUSTOM corporation

【With calibration certificate in Chinese attached】Ultrasonic Thickness Meter STG-02　STG-02

Can measure the thickness of various materials from metals to non-metals.
The thickness is calculated by measuring the time (propagation time) when the ultrasonic wave output from the probe enters the object to be measured and returns to the opposite surface.

A&D

Dual Type Film Thickness Gauge　AD-3256

This measuring instrument can measure the thickness of paint on automobiles and bridges.
It automatically identifies the metal to be measured and measures it using the appropriate measurement method (Electromagnetic induction type, eddy current type).

A&D

Battery lid

A&D

Dual Type Film Thickness Gauge with General Calibration　AD3256-00A00

It comes with a general calibration certificate.
This measuring instrument can measure the thickness of paint on automobiles and bridges.

EPK

Máy đo độ dày màng điện từ Kiểm tra thông minh F2.6

EPK

Máy đo độ dày màng kéo từ tính G6

CUSTOM corporation

Bộ đĩa hiệu chuẩn cho TG-01U

SANKO ELECTRONIC LABOLATORY CO., LTD.

Integral Dual use Film Thickness Meter Single Function type with English Calibration Certificate　SAMAC-FN

Base metal is automatically discriminated and measured.
Can be measured in the dark with the back light.

SANKO ELECTRONIC LABOLATORY CO., LTD.

Integral Dual use Film Thickness Meter Single Function type with Chinese Calibration Certificate　SAMAC-FN

Base metal is automatically discriminated and measured.
Can be measured in the dark with the back light.

SANKO ELECTRONIC LABOLATORY CO., LTD.

Integral Dual use Film Thickness Meter high Function type with English Calibration Certificate　SAMAC-PRO

Base metal is automatically discriminated and measured.
Can be measured in the dark with the back light.

SANKO ELECTRONIC LABOLATORY CO., LTD.

Integral Dual use Film Thickness Meter high Function type with Chinese Calibration Certificate　SAMAC-PRO

Base metal is automatically discriminated and measured.
Can be measured in the dark with the back light.

SANKO ELECTRONIC LABOLATORY CO., LTD.

Integrated Electromagnetic Coating Thickness Gauge with English Calibration Certificate　SAMAC-F

simple film thickness gauge
shipbuilding industry

SANKO ELECTRONIC LABOLATORY CO., LTD.

Integrated Electromagnetic Coating Thickness Gauge with Chinese Calibration Certificate　SAMAC-F

simple film thickness gauge
shipbuilding industry

A&D

Máy đo độ dày siêu âm　AD-3255

1 đơn vị bao gồm một phạm vi đo rộng 0,8 ~ 300 mm
Chế độ quét để đo độ dày tối thiểu trên một phạm vi rộng