[Timken] Tất cả các Sản phẩm
Dụng cụ & Vật tư Lab
-
Bộ phận điện tử/điện và thiết bị điều khiển
Nhà máy Công cụ & Vật tư
-
Thiết bị chế biến sản xuất
- theo nhóm Sản phẩm
- theo Sản phẩm
Sắp xếp theo:
-
Vòng bi đũa hình nón LM67048/LM67010, 31.75mm ID, 59.13mm OD LM67048/LM67010
Vòng bi lăn hình nón - TS (Đơn thon) Imperial/Metric. Những vòng bi này là loại vòng bi lăn hình nón cơ bản và được sử dụng rộng rãi nhất. Chúng bao gồm hai bộ phận tách rời chính, lắp ráp hình nón (vòng trong) và cốc (vòng ngoài). Chúng thường được gắn trong các cặp đối lập trên một trục. Các tính năng và lợi ích. Hoàng / Metric. Một mảnh đóng dấu lồng thép giữ lại con lăn trên hình nón. Phạm vi đường kính bên trong 7,937 mm đến 863,600 mm. Phạm vi đường kính ngoài 31,991 mm đến 1060,000 mm. Một hình nón và cốc. Thông tin ứng dụng sản phẩm. Các ứng dụng điển hình bao gồm, bánh trước xe, cấu hình vi sai và bánh răng, cuộn băng tải, trục công cụ máy và bánh xe rơ moóc.
1Đã tìm thấy sản phẩm
JPY: 5,800
USD: 36.36
-
Vòng bi đũa hình nón LM503349/LM503310, 45.98mm ID, 74.97mm OD LM503349/LM503310
Vòng bi lăn hình nón - TS (Đơn thon) Imperial/Metric. Những vòng bi này là loại vòng bi lăn hình nón cơ bản và được sử dụng rộng rãi nhất. Chúng bao gồm hai bộ phận tách rời chính, lắp ráp hình nón (vòng trong) và cốc (vòng ngoài). Chúng thường được gắn trong các cặp đối lập trên một trục. Các tính năng và lợi ích. Hoàng / Metric. Một mảnh đóng dấu lồng thép giữ lại con lăn trên hình nón. Phạm vi đường kính bên trong 7,937 mm đến 863,600 mm. Phạm vi đường kính ngoài 31,991 mm đến 1060,000 mm. Một hình nón và cốc. Thông tin ứng dụng sản phẩm. Các ứng dụng điển hình bao gồm, bánh trước xe, cấu hình vi sai và bánh răng, cuộn băng tải, trục công cụ máy và bánh xe rơ moóc.
1Đã tìm thấy sản phẩm
JPY: 10,200
USD: 63.94
-
Vòng bi đũa hình nón LM48548/LM48510, 34.92mm ID, 65.08mm OD LM48548/LM48510
Tapered Roller Bearings - TS (Tapered Single) Inches/Meters
This bearing is the most basic and most widely used type of tapered roller bearing. It consists of two main separable parts: the cone (inner ring) assembly and the cup (outer ring). They are mounted mainly as facing pairs on the shaft.1Đã tìm thấy sản phẩm
JPY: 6,720
USD: 42.12
-
Vòng bi đũa hình nón LM11949/LM11910, 19.05mm ID, 45.23mm OD LM11949/LM11910
Tapered Roller Bearings - TS (Tapered Single) Inches/Meters
This bearing is the most basic and most widely used type of tapered roller bearing. It consists of two main separable parts: the cone (inner ring) assembly and the cup (outer ring). They are mounted mainly as facing pairs on the shaft.1Đã tìm thấy sản phẩm
JPY: 4,980
USD: 31.22
-
Vòng bi đũa hình nón L44649/L44610, 26.98mm ID, 50.29mm OD L44649/L44610
Tapered Roller Bearings - TS (Tapered Single) Inches/Meters
This bearing is the most basic and most widely used type of tapered roller bearing. It consists of two main separable parts: the cone (inner ring) assembly and the cup (outer ring). They are mounted mainly as facing pairs on the shaft.1Đã tìm thấy sản phẩm
JPY: 5,680
USD: 35.61
-
Vòng bi đũa hình nón 07100S/07210X, 25,4mm ID, 50,8mm OD 07100S/07210X
Tapered Roller Bearings - TS (Tapered Single) Inches/Meters
This bearing is the most basic and most widely used type of tapered roller bearing. It consists of two main separable parts: the cone (inner ring) assembly and the cup (outer ring). They are mounted mainly as facing pairs on the shaft.1Đã tìm thấy sản phẩm
JPY: 11,100
USD: 69.58
-
Vòng bi đũa hình nón M86649/M86610, 30.16mm ID, 64.29mm OD M86649/M86610
Tapered Roller Bearings - TS (Tapered Single) Inches/Meters
This bearing is the most basic and most widely used type of tapered roller bearing. It consists of two main separable parts: the cone (inner ring) assembly and the cup (outer ring). They are mounted mainly as facing pairs on the shaft.1Đã tìm thấy sản phẩm
JPY: 8,450
USD: 52.97
-
Vòng bi đũa hình nón M802048/M802011, 41,27mm ID, 82,55mm OD M802048/M802011
Tapered Roller Bearings - TS (Tapered Single) Inches/Meters
This bearing is the most basic and most widely used type of tapered roller bearing. It consists of two main separable parts: the cone (inner ring) assembly and the cup (outer ring). They are mounted mainly as facing pairs on the shaft.1Đã tìm thấy sản phẩm
JPY: 14,300
USD: 89.64
-
Vòng bi đũa hình nón M88048/M88010, 33.33mm ID, 68.26mm OD M88048/M88010
Tapered Roller Bearings - TS (Tapered Single) Inches/Meters
This bearing is the most basic and most widely used type of tapered roller bearing. It consists of two main separable parts: the cone (inner ring) assembly and the cup (outer ring). They are mounted mainly as facing pairs on the shaft.1Đã tìm thấy sản phẩm
JPY: 8,610
USD: 53.97
-
Vòng bi đũa hình nón 09067/09195, ID 19.05mm, OD 49.22mm 09067/09195
Tapered Roller Bearings - TS (Tapered Single) Inches/Meters
This bearing is the most basic and most widely used type of tapered roller bearing. It consists of two main separable parts: the cone (inner ring) assembly and the cup (outer ring). They are mounted mainly as facing pairs on the shaft.1Đã tìm thấy sản phẩm
JPY: 10,600
USD: 66.45
-
Vòng bi đũa hình nón JL819349/JL819310, 95mm ID, 135mm OD JL819349/JL819310
Tapered Roller Bearings - TS (Tapered Single) Inches/Meters
This bearing is the most basic and most widely used type of tapered roller bearing. It consists of two main separable parts: the cone (inner ring) assembly and the cup (outer ring). They are mounted mainly as facing pairs on the shaft.1Đã tìm thấy sản phẩm
JPY: 34,700
USD: 217.51
-
Vòng bi đũa hình nón 37431A/37625, 109,53mm ID, 158,75mm OD 37431A/37625
Tapered Roller Bearings - TS (Tapered Single) Inches/Meters
This bearing is the most basic and most widely used type of tapered roller bearing. It consists of two main separable parts: the cone (inner ring) assembly and the cup (outer ring). They are mounted mainly as facing pairs on the shaft.1Đã tìm thấy sản phẩm
JPY: 46,700
USD: 292.74
-
Vòng bi đũa hình nón 18690/18620, 46.03mm ID, 79.37mm OD 18690/18620
Tapered Roller Bearings - TS (Tapered Single) Inches/Meters
This bearing is the most basic and most widely used type of tapered roller bearing. It consists of two main separable parts: the cone (inner ring) assembly and the cup (outer ring). They are mounted mainly as facing pairs on the shaft.1Đã tìm thấy sản phẩm
JPY: 13,600
USD: 85.25
-
Vòng bi đũa hình nón HM88649/HM88610, 34.92mm ID, 72.23mm OD HM88649/HM88610
Tapered Roller Bearings - TS (Tapered Single) Inches/Meters
This bearing is the most basic and most widely used type of tapered roller bearing. It consists of two main separable parts: the cone (inner ring) assembly and the cup (outer ring). They are mounted mainly as facing pairs on the shaft.1Đã tìm thấy sản phẩm
JPY: 10,700
USD: 67.07
-
Vòng bi đũa hình nón HM801346X/HM801310, 38.1mm ID, 82.55mm OD HM801346X/HM801310
Tapered Roller Bearings - TS (Tapered Single) Inches/Meters
This bearing is the most basic and most widely used type of tapered roller bearing. It consists of two main separable parts: the cone (inner ring) assembly and the cup (outer ring). They are mounted mainly as facing pairs on the shaft.1Đã tìm thấy sản phẩm
JPY: 21,500
USD: 134.77
-
Vòng bi đũa hình nón LM603049/LM603011, 45.24mm ID, 77.78mm OD LM603049/LM603011
Tapered Roller Bearings - TS (Tapered Single) Inches/Meters
This bearing is the most basic and most widely used type of tapered roller bearing. It consists of two main separable parts: the cone (inner ring) assembly and the cup (outer ring). They are mounted mainly as facing pairs on the shaft.1Đã tìm thấy sản phẩm
JPY: 9,440
USD: 59.17
-
Vòng bi đũa hình nón JLM104948/JLM104910, 50mm ID, 82mm OD JLM104948/JLM104910
Tapered Roller Bearings - TS (Tapered Single) Inches/Meters
This bearing is the most basic and most widely used type of tapered roller bearing. It consists of two main separable parts: the cone (inner ring) assembly and the cup (outer ring). They are mounted mainly as facing pairs on the shaft.1Đã tìm thấy sản phẩm
JPY: 11,600
USD: 72.71
-
Vòng bi đũa hình nón 3780/3720, 50.8mm ID, 93.26mm OD 3780/3720
Tapered Roller Bearings - TS (Tapered Single) Inches/Meters
This bearing is the most basic and most widely used type of tapered roller bearing. It consists of two main separable parts: the cone (inner ring) assembly and the cup (outer ring). They are mounted mainly as facing pairs on the shaft.1Đã tìm thấy sản phẩm
JPY: 17,200
USD: 107.82
-
Vòng bi đũa hình nón L68149/L68111, 34.98mm ID, 59.97mm OD L68149/L68111
Tapered Roller Bearings - TS (Tapered Single) Inches/Meters
This bearing is the most basic and most widely used type of tapered roller bearing. It consists of two main separable parts: the cone (inner ring) assembly and the cup (outer ring). They are mounted mainly as facing pairs on the shaft.1Đã tìm thấy sản phẩm
JPY: 6,300
USD: 39.49
-
Vòng bi đũa hình nón L44643/L44610, ID 25,4mm, OD 50,29mm L44643/L44610
Tapered Roller Bearings - TS (Tapered Single) Inches/Meters
This bearing is the most basic and most widely used type of tapered roller bearing. It consists of two main separable parts: the cone (inner ring) assembly and the cup (outer ring). They are mounted mainly as facing pairs on the shaft.1Đã tìm thấy sản phẩm
JPY: 5,700
USD: 35.73
-
Vòng bi đũa hình nón L45449/L45410, ID 29mm, OD 50,29mm L45449/L45410
Tapered Roller Bearings - TS (Tapered Single) Inches/Meters
This bearing is the most basic and most widely used type of tapered roller bearing. It consists of two main separable parts: the cone (inner ring) assembly and the cup (outer ring). They are mounted mainly as facing pairs on the shaft.1Đã tìm thấy sản phẩm
JPY: 4,390
USD: 27.52
-
Vòng bi đũa hình nón LM501349/LM501310, 41.27mm ID, 73.43mm OD LM501349/LM501310
Tapered Roller Bearings - TS (Tapered Single) Inches/Meters
This bearing is the most basic and most widely used type of tapered roller bearing. It consists of two main separable parts: the cone (inner ring) assembly and the cup (outer ring). They are mounted mainly as facing pairs on the shaft.1Đã tìm thấy sản phẩm
JPY: 8,300
USD: 52.03
-
Vòng bi đũa hình nón 18790/18720, ID 50,8mm, OD 85mm 18790/18720
Tapered Roller Bearings - TS (Tapered Single) Inches/Meters
This bearing is the most basic and most widely used type of tapered roller bearing. It consists of two main separable parts: the cone (inner ring) assembly and the cup (outer ring). They are mounted mainly as facing pairs on the shaft.1Đã tìm thấy sản phẩm
JPY: 13,700
USD: 85.88
-
Vòng bi đũa hình nón HM89449/HM89410, 36.51mm ID, 76.2mm OD HM89449/HM89410
Tapered Roller Bearings - TS (Tapered Single) Inches/Meters
This bearing is the most basic and most widely used type of tapered roller bearing. It consists of two main separable parts: the cone (inner ring) assembly and the cup (outer ring). They are mounted mainly as facing pairs on the shaft.1Đã tìm thấy sản phẩm
JPY: 14,600
USD: 91.52
-
Vòng bi đũa hình nón HM803146/HM803110, 41.27mm ID, 88.9mm OD HM803146/HM803110
Tapered Roller Bearings - TS (Tapered Single) Inches/Meters
This bearing is the most basic and most widely used type of tapered roller bearing. It consists of two main separable parts: the cone (inner ring) assembly and the cup (outer ring). They are mounted mainly as facing pairs on the shaft.1Đã tìm thấy sản phẩm
JPY: 20,400
USD: 127.88
-
Vòng bi đũa hình nón JM822049/JM822010, 110mm ID, 165mm OD JM822049/JM822010
Tapered Roller Bearings - TS (Tapered Single) Inches/Meters
This bearing is the most basic and most widely used type of tapered roller bearing. It consists of two main separable parts: the cone (inner ring) assembly and the cup (outer ring). They are mounted mainly as facing pairs on the shaft.1Đã tìm thấy sản phẩm
JPY: 69,000
USD: 432.52
-
Vòng bi đũa hình nón LM11749/LM11710, 17.46mm ID, 39.87mm OD LM11749/LM11710
Tapered Roller Bearings - TS (Tapered Single) Inches/Meters
This bearing is the most basic and most widely used type of tapered roller bearing. It consists of two main separable parts: the cone (inner ring) assembly and the cup (outer ring). They are mounted mainly as facing pairs on the shaft.1Đã tìm thấy sản phẩm
JPY: 4,530
USD: 28.40
-
Vòng bi đũa hình nón LM29749/LM29710, 38.1mm ID, 65.08mm OD LM29749/LM29710
Tapered Roller Bearings - TS (Tapered Single) Inches/Meters
This bearing is the most basic and most widely used type of tapered roller bearing. It consists of two main separable parts: the cone (inner ring) assembly and the cup (outer ring). They are mounted mainly as facing pairs on the shaft.1Đã tìm thấy sản phẩm
JPY: 8,050
USD: 50.46
-
Vòng bi đũa hình nón 07087X/07210X, 22.22mm ID, 50.8mm OD 07087X/07210X
Tapered Roller Bearings - TS (Tapered Single) Inches/Meters
This bearing is the most basic and most widely used type of tapered roller bearing. It consists of two main separable parts: the cone (inner ring) assembly and the cup (outer ring). They are mounted mainly as facing pairs on the shaft.1Đã tìm thấy sản phẩm
JPY: 11,900
USD: 74.59
-
Vòng bi đũa hình nón M84548/M84510, ID 25,4mm, OD 57,15mm M84548/M84510
Tapered Roller Bearings - TS (Tapered Single) Inches/Meters
This bearing is the most basic and most widely used type of tapered roller bearing. It consists of two main separable parts: the cone (inner ring) assembly and the cup (outer ring). They are mounted mainly as facing pairs on the shaft.1Đã tìm thấy sản phẩm
JPY: 9,370
USD: 58.74
-
Vòng bi đũa hình nón LM806649/LM806610, 53.97mm ID, 88.9mm OD LM806649/LM806610
Tapered Roller Bearings - TS (Tapered Single) Inches/Meters
This bearing is the most basic and most widely used type of tapered roller bearing. It consists of two main separable parts: the cone (inner ring) assembly and the cup (outer ring). They are mounted mainly as facing pairs on the shaft.1Đã tìm thấy sản phẩm
JPY: 13,200
USD: 82.74
-
Vòng bi đũa hình nón HM89446/HM89410, 34.92mm ID, 76.2mm OD HM89446/HM89410
Tapered Roller Bearings - TS (Tapered Single) Inches/Meters
This bearing is the most basic and most widely used type of tapered roller bearing. It consists of two main separable parts: the cone (inner ring) assembly and the cup (outer ring). They are mounted mainly as facing pairs on the shaft.1Đã tìm thấy sản phẩm
JPY: 14,400
USD: 90.27
-
Vòng bi đũa hình nón LM67049A/LM67010, 31.75mm ID, 59.13mm OD LM67049A/LM67010
Tapered Roller Bearings - TS (Tapered Single) Inches/Meters
This bearing is the most basic and most widely used type of tapered roller bearing. It consists of two main separable parts: the cone (inner ring) assembly and the cup (outer ring). They are mounted mainly as facing pairs on the shaft.1Đã tìm thấy sản phẩm
JPY: 7,450
USD: 46.70
-
Vòng bi đũa hình nón 15123/15245, 31,75mm ID, 62mm OD 15123/15245
Tapered Roller Bearings - TS (Tapered Single) Inches/Meters
This bearing is the most basic and most widely used type of tapered roller bearing. It consists of two main separable parts: the cone (inner ring) assembly and the cup (outer ring). They are mounted mainly as facing pairs on the shaft.1Đã tìm thấy sản phẩm
JPY: 8,540
USD: 53.53
-
Vòng bi đũa hình nón 368A/362A, 50.8mm ID, 88.9mm OD 368A/362A
Tapered Roller Bearings - TS (Tapered Single) Inches/Meters
This bearing is the most basic and most widely used type of tapered roller bearing. It consists of two main separable parts: the cone (inner ring) assembly and the cup (outer ring). They are mounted mainly as facing pairs on the shaft.1Đã tìm thấy sản phẩm
JPY: 15,700
USD: 98.41
-
Vòng bi đũa hình nón JL68145/JL68111Z, 35mm ID, 60mm OD JL68145/JL68111Z
Tapered Roller Bearings - TS (Tapered Single) Inches/Meters
This bearing is the most basic and most widely used type of tapered roller bearing. It consists of two main separable parts: the cone (inner ring) assembly and the cup (outer ring). They are mounted mainly as facing pairs on the shaft.1Đã tìm thấy sản phẩm
JPY: 8,370
USD: 52.47
-
Vòng bi đũa hình nón 25590/25520, 45,61mm ID, 82,93mm OD 25590/25520
Tapered Roller Bearings - TS (Tapered Single) Inches/Meters
This bearing is the most basic and most widely used type of tapered roller bearing. It consists of two main separable parts: the cone (inner ring) assembly and the cup (outer ring). They are mounted mainly as facing pairs on the shaft.1Đã tìm thấy sản phẩm
JPY: 11,800
USD: 73.97
-
Vòng bi đũa hình nón 18590/18520, 41.27mm ID, 73.02mm OD 18590/18520
Tapered Roller Bearings - TS (Tapered Single) Inches/Meters
This bearing is the most basic and most widely used type of tapered roller bearing. It consists of two main separable parts: the cone (inner ring) assembly and the cup (outer ring). They are mounted mainly as facing pairs on the shaft.1Đã tìm thấy sản phẩm
JPY: 15,600
USD: 97.79
-
Vòng bi đũa hình nón 3490/3420, 38.1mm ID, 79.37mm OD 3490/3420
Tapered Roller Bearings - TS (Tapered Single) Inches/Meters
This bearing is the most basic and most widely used type of tapered roller bearing. It consists of two main separable parts: the cone (inner ring) assembly and the cup (outer ring). They are mounted mainly as facing pairs on the shaft.1Đã tìm thấy sản phẩm
JPY: 22,800
USD: 142.92
-
Vòng bi đũa hình nón M86647/M86610, ID 28,57mm, OD 64,29mm M86647/M86610
Tapered Roller Bearings - TS (Tapered Single) Inches/Meters
This bearing is the most basic and most widely used type of tapered roller bearing. It consists of two main separable parts: the cone (inner ring) assembly and the cup (outer ring). They are mounted mainly as facing pairs on the shaft.1Đã tìm thấy sản phẩm
JPY: 12,900
USD: 80.86
