Star Electric Manufacturing CO.,LTD.

Máy Cắt Plasma Không Khí (Espada 40)　APC-40

A pilot arc system is adopted, and arc start can be performed without touch.
Even if the torch tip floats off the cutting surface during cutting, there is little arc break and smooth cutting is possible.

Star Electric Manufacturing CO.,LTD.

Máy cắt trung bình Đơn vị chính chỉ

Star Electric Manufacturing CO.,LTD.

Máy hàn bán tự động Bộ đơn vị chính Bộ không khí 100/200V (Loại chuyển mạch)

Star Electric Manufacturing CO.,LTD.

Máy hàn bán tự động Thép không khí mềm (φ0.8mm)

Star Electric Manufacturing CO.,LTD.

Máy hàn biến tần DC (Imax 120)　SIM-120

Inverter control with beautiful finish.

Star Electric Manufacturing CO.,LTD.

Hàn Burn Remover 400 g　EA315SJ-1

It is effective not only for welding burn but also for removing burn caused by high heat such as muffler and removing rust and water stains.
Weld burn can be removed without the need for a machine like an electropolishing machine.

Star Electric Manufacturing CO.,LTD.

Mũ bảo hiểm hàn hồ quang (Bộ lọc màu xanh/rộng) [Đối với EA800PV-11]

Star Electric Manufacturing CO.,LTD.

Bề mặt hàn (cầm tay) 230 x 405 x 138 mm　EA800PV-31

Application: For use with hand-held surfaces during welding

Star Electric Manufacturing CO.,LTD.

[# 9] Tấm chắn để hàn 50 x 105 mm

Star Electric Manufacturing CO.,LTD.

Hộp mực che chắn ánh sáng tinh thể lỏng (cho bề mặt hàn/Xanh lá cây) # 9- # 13

Star Electric Manufacturing CO.,LTD.

Đĩa Bìa

Star Electric Manufacturing CO.,LTD.

KÌM HÀN　P-86

This is a joint development with tool manufacturer "FUJIYA."
Can be used in various welding situations.

Star Electric Manufacturing CO.,LTD.

Bộ lọc hàn tự động　PM-10CB

The use of a blue filter provides a clearer view than ever before.
The three adjustment dials allow you to adjust the light intensity, sensitivity, and return speed.

Star Electric Manufacturing CO.,LTD.

［Không còn giữ lại］Dây nguồn ba pha Xoay tích cực x 2, Xoay ngược x 1

Star Electric Manufacturing CO.,LTD.

［Không còn giữ lại］Bộ hàn MAG cho thép mềm/thép không gỉ (SUS) không có xi lanh khí　MAS-50

MAG welding kit for semi-automatic welding machine.
Available mainly for SAY-120 and 160.

Star Electric Manufacturing CO.,LTD.

［Không còn giữ lại］Carbon-Dioxide hàn SET mà không có xi lanh khí　MCS-50

MAG welding kit for semi-automatic welding machine.
Available mainly for SAY-120, SAY-160 and SIV-140.

Star Electric Manufacturing CO.,LTD.

［Không còn giữ lại］Bộ hàn MIG cho nhôm không có xi lanh khí　MIS-50

MAG welding kit for semi-automatic welding machine.
Available mainly for SAY-120, SAY-160 and SIV-140.

Star Electric Manufacturing CO.,LTD.

［Không còn giữ lại］Chip cho nhôm rắn 1.0φ (5 miếng)　P-607

This is a chip for the Arcury series Einova series.
For tip replacement of SUZUKID semi-automatic welder.

Star Electric Manufacturing CO.,LTD.

［Không còn giữ lại］Biến áp　SNT-312

Portable transformer for both step-up and step-down.
When the power is connected and the breaker is turned on, 100 V/115 V is output to the outlet.

Star Electric Manufacturing CO.,LTD.

［Không còn giữ lại］Biến áp cộng với một　STX-312P

Portable transformer for both step-up and step-down.
When the power is connected and the breaker is turned on, 100 V/115 V is output to the outlet.

Star Electric Manufacturing CO.,LTD.

［Đã ngừng］Biến áp F　STY-512F

It is a portable transformer for step-down only.
With a total of 6 output outlets, various devices can be used.

Star Electric Manufacturing CO.,LTD.

［Đã ngừng］Toa xe cho SAY-120　SW-100

General purpose welding wagon for small welding machine.
For moving around the welding workshop.

Star Electric Manufacturing CO.,LTD.

［Đã ngừng］Màu LED ánh sáng rắn　VPA101L

2 light type with an ultra-wide angle of 120 degrees.
Lights can be re-lit immediately after turning off.

Star Electric Manufacturing CO.,LTD.

［Đã ngừng］Toa xe hàn cho SIV -140　WG-SIV

This is a trolley for SIV-140.
A cylinder of 4m3 or less can be mounted.

Star Electric Manufacturing CO.,LTD.

［Đã ngừng］Nhà > Sản phẩm > Arc Welder

Star Electric Manufacturing CO.,LTD.

［Đã ngừng］An toàn nhảy Starter

Star Electric Manufacturing CO.,LTD.

［Không còn giữ lại］Que hàn cho mạ kẽm

Star Electric Manufacturing CO.,LTD.

［Không còn giữ lại］Máy biến áp tương thích thiết bị ở nước ngoài　STU-312

The input power can be used at 100 V or 200 V by simply replacing the screws on the front panel.
When the power is connected and the breaker is turned on, 100 V/200 V is output to the outlet.

Star Electric Manufacturing CO.,LTD.

［Đã ngừng］Máy hút bụi　VVM-27LC

Three structures, exhaust filter, sponge filter, and tank filter, reduce clogging and prevent the suction force from dropping.
Protect the motor with a temperature sensor.

Star Electric Manufacturing CO.,LTD.

［Đã ngừng］Máy hút bụi　VVM-40L

The simple structure reduces weight even with a large tank capacity.
Protect the motor with a temperature sensor.

Star Electric Manufacturing CO.,LTD.

［Đã ngừng］tấm chắn màu xanh # 11 1 cái cho hàn　P411

The blue color has the effect of increasing the contrast against strong light, and it has the effect of showing the object clearly.
Protects eyes from arc light during welding.

Star Electric Manufacturing CO.,LTD.

［Đã ngừng］Nhảy khởi động 12 VDC/450 A

Star Electric Manufacturing CO.,LTD.

［Không còn giữ lại］Máy cắt plasma không khí　APC-15S

This is a professional 100 V dedicated air plasma that achieves the maximum "Kiri Nuki" at 100 V.
It has a power factor improvement (PFC) function to effectively handle voltage drop.

Star Electric Manufacturing CO.,LTD.

［Không còn giữ lại］Sự hàn Mặt nạ Eyeborg Dòng　EB-300PW

With the use of panoramic wide panels, a wide field of view of 180° and automatic shading of 3 surfaces are realized simultaneously.
The use of high-performance liquid crystal blue filters, which have been awarded the highest EU standard rating, has enabled clearer vision.

Star Electric Manufacturing CO.,LTD.

［Không còn giữ lại］Mặt nạ hàn Eyeborg Series　EB-300PWD

With the adoption of a digital panel, all settings can be easily operated with a digital display.
Equipped with Auto Mode, the sensor detects welding light and automatically sets the appropriate light shielding, sensitivity, and return speed.

Star Electric Manufacturing CO.,LTD.

［Không còn giữ lại］KÌM HÀN　P-85

This is a joint development with tool manufacturer "FUJIYA."
Can be used in various welding situations.

Star Electric Manufacturing CO.,LTD.

［Đã ngừng］LED ánh sáng BARMEN

Star Electric Manufacturing CO.,LTD.

［Đã ngừng］Đèn pin LED BARMEN

Star Electric Manufacturing CO.,LTD.

［Không còn giữ lại］Máy hàn TIG　STG-200D

Pulse is 4-step switching (2 Hz. 5 Hz. 10 Hz. 20 Hz).
It has a power factor improvement (PFC) function to effectively handle voltage drop.