[Nishinihonshikenki] Tất cả các Sản phẩm
Dụng cụ & Vật tư Lab
-
Dụng cụ đo lường
- theo nhóm Sản phẩm
- theo Sản phẩm
Sắp xếp theo:
-
Tay Auger S-101
It is suitable for investigating relatively shallow ground.
This is a manual boring machine that is convenient to carry and is suitable for sites where it is difficult to bring in large machines.1Đã tìm thấy sản phẩm
JPY: 69,000
USD: 432.52
-
Giảm đầu thấm Tester
4Đã tìm thấy sản phẩm
JPY: 165,000-
USD: 1,034.29-
-
Siphon Pha
Marriott siphon is a tool used to test whether the hydraulic conductivity of compacted ground meets the design conditions.
1Đã tìm thấy sản phẩm
JPY: 100,000
USD: 626.84
-
Khuôn mẫu JIS S-171a
1Đã tìm thấy sản phẩm
JPY: 27,000
USD: 169.25
-
Rammer 2,5kg
2Đã tìm thấy sản phẩm
JPY: 32,000-
USD: 200.59-
-
Dụng cụ lấy mẫu thủy lực JIS S-171c
Used for sample removal of mold with inner diameter φ100 mm.
Hydraulic jack type, mold top/bottom presser type, sample top extrusion type1Đã tìm thấy sản phẩm
JPY: 150,000
USD: 940.26
-
Khuôn CBR S-172a
1Đã tìm thấy sản phẩm
JPY: 40,000
USD: 250.74
-
Dụng cụ lấy mẫu điện thủy lực
The electric sample extractor can extract samples of CBR mold (φ15 cm mold) and JIS mold (φ10 cm mold) by electric power.
1Đã tìm thấy sản phẩm
JPY: 620,000
USD: 3,886.42
-
JIS đất Tamping Hai-Split loại khuôn S-173
It has the same specifications as the stiffening mold in ModelS-171a, except that the cylindrical mold part is split in two in the longitudinal direction and is tightened and assembled with 4 clamps.
The special clamp can be loosened when pulling out the hardened sample, so the sample can be pulled out easily.1Đã tìm thấy sản phẩm
JPY: 82,000
USD: 514.01
-
Thiết bị nén đất tự động S-174
It is used for the standard butting test of JIS soil and for the automatic butting of cbr specimens with mechanical accuracy.
Compared to conventional manual rammer clashing, it saves a lot of effort and produces correct clumping effect.1Đã tìm thấy sản phẩm
JPY: 1,200,000
USD: 7,522.10
-
Thiết bị kiểm tra điện CBR
4Đã tìm thấy sản phẩm
JPY: 850,000-
USD: 5,328.15-
-
Máy kiểm tra nén toàn cầu của đất 100kN S-182a
The universal soil compression tester is a strain control type compression tester using an electric screw jack.
The strain rate can be easily changed and the cross head can be moved up and down by the electric motor.1Đã tìm thấy sản phẩm
JPY: 2,900,000
USD: 18,178.40
-
Kiểm tra Jack 50kN
2Đã tìm thấy sản phẩm
JPY: 130,000-
USD: 814.89-
-
Bảng điều khiển đục lỗ 5kg S-186
1Đã tìm thấy sản phẩm
JPY: 42,000
USD: 263.27
-
Bàn Spacer S-189
1Đã tìm thấy sản phẩm
JPY: 12,000
USD: 75.22
-
Tải tấm 1,25kg S-191
1Đã tìm thấy sản phẩm
JPY: 4,000
USD: 25.07
-
Dial Gauge Chủ Tripod Loại S-192b
Dial gauge holder for indoor CBR test
1Đã tìm thấy sản phẩm
JPY: 15,000
USD: 94.03
-
Dụng cụ đo trọng lượng đơn vị (Thiết bị đo mật độ trường JIS) S-207
This equipment indirectly measures the volume of soil by replacing the unit volume of soil in the field with dry sand. It is applicable to either cohesive or non-cohesive soil or mixed soil.
1Đã tìm thấy sản phẩm
JPY: 88,000
USD: 551.62
-
Cát tiêu chuẩn JIS (Số cát Silica 5) 25kg S-208
It is a typical standard sand determined by the sand replacement method.
1Đã tìm thấy sản phẩm
JPY: 10,000
USD: 62.68
-
Thiết bị đo mật độ trường tuân thủ tiêu chuẩn của Tập đoàn Công cộng Nhật Bản φ150
2Đã tìm thấy sản phẩm
JPY: 60,000-
USD: 376.11-
-
Dụng cụ kiểm tra mật độ trường tuân thủ tiêu chuẩn của MAF φ200
2Đã tìm thấy sản phẩm
JPY: 34,000-
USD: 213.13-
-
Viện nghiên cứu công trình công cộng Penetrometer
5Đã tìm thấy sản phẩm
JPY: 160,000-
USD: 1,002.95-
-
Thụy Điển Rod Pulling-Out Thiết bị S-215j
It uses a long stroke jack, so unlike previous drawing machines, it has a stroke of more than 1m and can easily lift one rod.
A relief valve is built in, so you can adjust the strength of the pulling force.1Đã tìm thấy sản phẩm
JPY: 350,000
USD: 2,193.95
-
Thấm Penetrometer
4Đã tìm thấy sản phẩm
JPY: 150,000-
USD: 940.26-
-
Tải trọng tấm 50kn (Loại nam châm đo hai điểm) với hộp lưu trữ
2Đã tìm thấy sản phẩm
JPY: 310,000-
USD: 1,943.21-
-
Thiết bị kiểm tra cánh quạt di động S-233
1Đã tìm thấy sản phẩm
JPY: 500,000
USD: 3,134.21
-
Thiết bị nén không giới hạn thủ công 500N
3Đã tìm thấy sản phẩm
JPY: 460,000-
USD: 2,883.47-
-
Nhớt kế Phễu S-251
It is a flow-type viscometer that can be easily used in the field and is displayed as funnel viscosity.
1Đã tìm thấy sản phẩm
JPY: 74,000
USD: 463.86
-
Cân bằng bùn S-252a
Mud Balance is the most commonly used mud hydrometer to easily measure the specific gravity of mud in the field.
The adjustment is made very easy by adjusting the screw inside the memory tube.1Đã tìm thấy sản phẩm
JPY: 140,000
USD: 877.58
-
Vỏ nhôm cân bằng bùn S-252b
The mud balance case is a dedicated storage container for mud balance (mud water hydrometer).
1Đã tìm thấy sản phẩm
JPY: 25,000
USD: 156.71
-
Dụng cụ đo hàm lượng cát S-254
The sand fraction meter is a measuring instrument used to easily measure the sand content in muddy water.
It has a scale so that you can see the sand content (volume%) at a glance.1Đã tìm thấy sản phẩm
JPY: 94,000
USD: 589.23
-
Yamanaka Type Soil Hardness Meter S-117
You can easily measure the hardness of the soil just by sticking it into the ground.
It can be used for soil cross section measurement because it directly indicates important engineering properties such as soil compaction strength, shear strength and cohesion in the field condition.1Đã tìm thấy sản phẩm
JPY: 130,000
USD: 814.89
-
[Đã ngừng]Máy lọc nước bùn S-250
The mud-water filtration tester is used to measure the dewatering of muddy water and the mud wall. It is constructed by pressurizing and filtering the sample in the filtration container installed on the top of the trestle.
1Đã tìm thấy sản phẩm
JPY: 238,000
USD: 1,491.88

