TP GIKEN

Kiểm tra mảnh gỗ tấm Lauan ván ép 100 miếng

TP GIKEN

Kiểm tra mảnh cao su tấm cao su tự nhiên 50 miếng

TP GIKEN

Rãnh container cho thử nghiệm mảnh đèn dải thử nghiệm, 10 miếng　

TP GIKEN

Kiểm tra mảnh vữa 100 miếng　

TP GIKEN

Kiểm tra mảnh kính 100 miếng　

TP GIKEN

Thử nghiệm mảnh thuộc địa 50 miếng　

TP GIKEN

Kiểm tra mảnh Calcium Condensate, 50 miếng　

TP GIKEN

Kiểm tra mảnh Cationic Electrodeposition Coating 50 miếng　

TP GIKEN

Thử nghiệm mảnh thép màu 50 miếng　

TP GIKEN

Kiểm tra mảnh thép mạ kẽm, 50 miếng　

TP GIKEN

Kiểm tra mảnh thép tấm Galvanium, 50 miếng　

TP GIKEN

Kiểm tra mảnh nhựa đường nỉ, 430, 50 miếng　

TP GIKEN

Thử nghiệm mảnh thiếc tấm với 300 miếng　

TP GIKEN

Kiểm tra độ võng (Drooping Tester) Loại hộp Tiêu chuẩn JIS 140 x 40 x 30mm

TP GIKEN

Multi Applicator (Chiều rộng lớp phủ 50mm)

TP GIKEN

Máy so sánh phân tán sắc tố 500 x 420 x 650mm　TP-035

This machine has been developed as a dispersion comparison test machine that is closest to the dispersion principle of Eyeliter sand grind mill.
Pigments, vehicles, and glass beads are prepared in a glass tube, tightly stoppered, and loaded into the unit. When horizontal motion is applied in the longitudinal direction of the tube, the dispersion effect is exerted by the movement and vibration of the glass bead.

TP GIKEN

Máy đo độ bền mài mòn của Taber 515 x 310 x 360mm　TP-152

This machine is used to measure the degree of wear of surface treatment materials such as coating and plating, plastics, rubber, decorative plywood, fibers, and other materials.

TP GIKEN

Máy giặt (2 kệ) 480 x 650 x 720mm　TP-153

It is an excellent testing machine that performs cleaning resistance tests on paint coatings, plastics, floor materials, and other materials and is manufactured in accordance with JIS standards and the Gardner system.
The specimen surface is reciprocated at constant speed by the prescribed brush to observe the condition of feeding the specimen.

TP GIKEN

Máy kiểm tra ma sát phim 400 x 350 x 600mm　TP-154

This machine measures the friction durability of marker pens for metal coatings and stationery by rubbing them with gauze, felt, sand eraser, etc.

TP GIKEN

Máy kiểm tra Erichsen 240 x 480 x 300mm　TP-180

This unit measures the coating strength of a painted surface.
The specimen set in the specimen holder is fastened and fixed with a die, and the punch is extruded from the back of the film surface.

TP GIKEN

Tấm hút 160 x 260 x 50mm　TP-201

When the applicator, sag tester, etc., is used to create a constant thickness coating film, the purpose of this system is to create a constant coating film by sucking and adhering the test specimen onto the plate (float glass) to maintain smooth contact.

TP GIKEN

Dụng cụ làm phim tự động (Loại cũng được sử dụng làm Bar Coater) 940 x 540 x 300mm　TP-202

This is a test machine that performs optimum coating tests on sheets of paper, metal, film, etc., by setting the coating speed with an applicator or bar coater.

TP GIKEN

Máy đo thời gian không có loại JIS 450 x 400 x 400mm　TP-250

This machine measures the drying time of traffic paint. It rolls the machine on the painted surface at a constant speed (passing through the paint film for 1 second) and checks whether the paint film has adhered to the tire of the test roll.
Use the traffic applicator to create a 150 mm wide coating film. Test the film 15 minutes after 1 type, 10 minutes after 2 types, and 3 types after 3 minutes to check for adhesion and reference the no-pickup time.

TP GIKEN

Máy kiểm tra đầu bút chì (Loại thủ công) 150 (130) x 80 x 65mm　TP-260

This is a manual pencil scratching tester manufactured in accordance with JIS K-5600 and equipped with the function of a pencil scratching tester.
The hardness and adhesion strength of the coating film are measured by the hardness of the pencil that scratches when the paint or varnish is scratched with a pencil held at a load of 750 g and an angle of 45 degrees.

TP GIKEN

Thử nghiệm độ bền khô qua　TP-261

It is used for a pass/fail test to determine whether a single coating or multilayer coating system of a paint or related product has reached a cured dry state after a specified drying time has elapsed.
It can also be used to measure the time it takes to reach the cured dry state.

TP GIKEN

Thép không gỉ Ford Cup 200 x 180 x 280mm　TP-304

This device fills a cup with a sample of paint, varnish, etc., and measures the viscosity easily and quickly by grinding the surface tension with the attached glass plate and the flow time from a fixed orifice.

TP GIKEN

ISO Flow Cup Đường kính lỗ 3mm 108mL

TP GIKEN

Zahn-Viscosity Cup Đường kính lỗ số 1 2.0mm

TP GIKEN

Máy đo độ nhớt Stormer 210 x 210 x 415mm　TP-330

Viscosity of paint in a 500 ml sample can is measured in seconds of 100 revolutions by the resistance value of the accurately finished rotor blade.
This is a test machine that measures the time and calculates the KU value by determining the head so that the rotor rotates 100 times in about 30 seconds.

TP GIKEN

Cốc trọng lực riêng 50mL 45φ x 45mm

TP GIKEN

Cốc chống ẩm JIS 410 x 250 x 200mm　TP-415

This unit is used to measure the moisture permeability of plastic paper, tarpaulin paper, and other packaging materials.

TP GIKEN

Máy kiểm tra Flex Phương pháp trục gá hình trụ

TP GIKEN

［Đã ngừng］RC Loại Coating Film Thời gian sấy Dụng cụ đo Loại I (Máy ghi khô) 240 x 500 x 110mm