MAX CO., LTD.

Tạp dề chống cháy NX 98 x 58mm　MT480-BE

Made from "Nomex (R) III" material with excellent flame retardancy. • Protects workers from hazards caused by sudden fires including high temperatures and flames.
Because of its strong and lightweight material, it can be worn as a general work wear.

MAX CO., LTD.

Cắt găng tay chống va đập và chống va đập 3D Guard (R) KV M

MAX CO., LTD.

Ngọn lửa chống cháy Arm Cover NX Strap cố định

MAX CO., LTD.

Găng tay lưới phát xạ hạt thấp (10 cặp)

MAX CO., LTD.

Găng tay bên trong cho máy đo sạch 13 (10 cặp)

MAX CO., LTD.

Găng Tay Bên Trong Nửa Ngón Tay Để Làm Sạch 13 Gauge (10 Cặp)　MX301EX

It is a low dust producing type using filament yarn, and high gauge is used for better fit and stretchability.
Repeatable and economical.

MAX CO., LTD.

Găng Tay Bên Trong Cho Sạch 13 Gauge, Dài (10 Cặp)

MAX CO., LTD.

Găng Tay Bên Trong Để Làm Sạch 15 Gauge (10 Cặp)

MAX CO., LTD.

Găng Tay Bên Trong Cho Sạch 15 Gauge, Long (10 Cặp) Gói Sạch

MAX CO., LTD.

Dehumidifying Găng tay bên trong 13 Gauge (10 cặp)

MAX CO., LTD.

Găng tay bên trong thoải mái 15 Gauge (10 cặp)

MAX CO., LTD.

Găng tay bên trong thoải mái 15 Gauge · Long (10 cặp)

MAX CO., LTD.

Găng tay nửa ngón tay thoải mái bên trong 15 Gauge (10 cặp)

MAX CO., LTD.

500 °C Correspondence Găng tay chịu nhiệt (Loại ba ngón)　MZ610

High heat resistance fiber "Zylon (R)" is used on the front side and aramid fiber fuelt is used for heat insulation as an inner material for high heat resistance work.

MAX CO., LTD.

Cắt găng tay kháng (Phần phẳng/Với Slip kháng)　MZ620

Uses high-strength fibers "Zylon (R)" and "Kevlar (R)" and has a high level of cut resistance.
The flat part is anti-slip.

MAX CO., LTD.

Găng tay chống cắt (Phần phẳng/Với Palm)　MZ621

Uses high-strength fibers "Zylon (R)" and "Kevlar (R)" and has a high level of cut resistance.
The flat part is reinforced with cowhide.

MAX CO., LTD.

500 °C Correspondence Găng tay chịu nhiệt　MZ623

Uses high-strength fibers "Zylon (R)" and "Kevlar (R)" with high heat resistance and high cut resistance.
Para aramid fiber fuelt is used as a heat insulating material on the inside of the palm.

MAX CO., LTD.

500 °C Correspondence Găng tay chịu nhiệt (Loại ba ngón)　MZ624

Uses high-strength fibers "Zylon (R)" and "Kevlar (R)" with high heat resistance and high cut resistance.
Para aramid fiber fuelt is used as a heat insulating material on the inside of the palm.

MAX CO., LTD.

500 °C Correspondence Găng tay chịu nhiệt (dài)　MZ626

It uses high-strength fibers Xylon (R) and Kevlar (R) and has high heat resistance and cutting ability.
Para-aramid fiber felt is used inside the palm as insulation.

MAX CO., LTD.

500 °C Correspondence Găng tay chịu nhiệt (dài, ba ngón loại)　MZ627

Uses high-strength fibers "Zylon (R)" and "Kevlar (R)" with high heat resistance and high cut resistance.
Para aramid fiber fuelt is used as a heat insulating material on the inside of the palm.

MAX CO., LTD.

Chịu nhiệt, cắt chống Arm Cover (Đan)　MZ680

Zylon (R) is a PBO fiber that has the highest strength and heat resistance of any existing organic fiber.
It has a flexible and flexible texture and is lightweight, so it has excellent workability.

MAX CO., LTD.

Chịu nhiệt, cắt chống Arm Cover (Đan)　MZ681

Zylon (R) is a PBO fiber that has the highest strength and heat resistance of any existing organic fiber.
It has a flexible and flexible texture and is lightweight, so it has excellent workability.

MAX CO., LTD.

Cắt găng tay kháng (Phần phẳng/Với Slip kháng)　MT700

These gloves are made of "Kevlar (R)" fiber, which provides unparalleled protection by adding strength without compromising sensitive hand movements.

MAX CO., LTD.

Găng tay chống cắt (Phần phẳng/Với Palm)　MT702

These gloves are made of "Kevlar (R)" fiber, which provides unparalleled protection by adding strength without compromising sensitive hand movements.

MAX CO., LTD.

Găng tay chịu nhiệt (300 °C Correspondence)　MT715

The entire front surface is made of Kevlar (R), a para-aramid fiber with a wide range of capabilities.
Para-aramid fiber blended felt is used as insulation inside.

MAX CO., LTD.

Găng tay chịu nhiệt (300 °C Correspondence) Loại ba ngón　MT716

The entire front surface is made of Kevlar (R), a para-aramid fiber with a wide range of capabilities.
Para-aramid fiber blended felt is used as insulation inside.

MAX CO., LTD.

Găng tay chịu nhiệt (300 °C Correspondence)　MT717

The entire front surface is made of Kevlar (R), a para-aramid fiber with a wide range of capabilities.
Para-aramid fiber blended felt is used as insulation inside.

MAX CO., LTD.

Găng Tay Chịu Nhiệt (300 °C Thư) Loại Ba Ngón, Dài　MT718

The entire front surface is made of Kevlar (R), a para-aramid fiber with a wide range of capabilities.
Para-aramid fiber blended felt is used as insulation inside.

MAX CO., LTD.

300 °C Thư Kháng Nhiệt Mitten　MT719

It uses Kevlar (R), a para-aramid fiber with a wide range of capabilities.
Para-aramid blended felt is used as insulation inside.

MAX CO., LTD.

Găng tay chịu nhiệt cho phòng sạch 300 °C Thư từ　MT720

These high-heat-resistant gloves are made of Kevlar (R), a high-strength fiber, and have a four-layer structure with aramid mixed felt and a special insulation sheet in the middle layer with the lining.
Three-dimensional sewing allows natural finger bending.

MAX CO., LTD.

Găng tay chịu nhiệt cho phòng sạch 300 °C Thư từ　MT721

These high-heat-resistant gloves are made of Kevlar (R), a high-strength fiber, and have a four-layer structure with aramid mixed felt and a special insulation sheet in the middle layer with the lining.
Three-dimensional sewing allows natural finger bending.

MAX CO., LTD.

Găng tay chịu nhiệt cho phòng sạch 300 °C Tương ứng (Dài)　MT722

These high-heat-resistant gloves are made of Kevlar (R), a high-strength fiber, and have a four-layer structure with aramid mixed felt and a special insulation sheet in the middle layer with the lining.
Three-dimensional sewing allows natural finger bending.

MAX CO., LTD.

Găng Chịu Nhiệt Cho Thư Tín Sạch 300 °C

MAX CO., LTD.

Găng Chịu Nhiệt Cho Thư Sạch 300 °C (Dài)

MAX CO., LTD.

Cắt ngón tay chống Cover　MT737-L

Cut resistant finger cover using high density knitted fabric of high-strength fiber "Dyneema (R)."
Protect your fingertips from glass pieces, box cutters, etc.

MAX CO., LTD.

Cắt ngón tay chống Cover　MT737-M

Cut resistant finger cover using high density knitted fabric of high-strength fiber "Dyneema (R)."
Protect your fingertips from glass pieces, box cutters, etc.

MAX CO., LTD.

Cách nhiệt, chịu nhiệt Mitten　MT764

Aramid fibers with flame retardant function are coated with aluminum, and heat insulation material is placed in the entire intermediate layer to provide excellent heat and insulation properties.
It has a loose size which improves the feeling of wearing by three-dimensional sewing and takes into consideration the use of layered shoes.

MAX CO., LTD.

Cách nhiệt, chịu nhiệt Mitten (Long)　MT766

Aramid fibers with flame retardant function are coated with aluminum, and heat insulation material is placed in the entire intermediate layer to provide excellent heat and insulation properties.
It has a loose size which improves the feeling of wearing by three-dimensional sewing and takes into consideration the use of layered shoes.

MAX CO., LTD.

Găng tay lắp ráp cho sạch 220 °C Correspondence Clean Pack Item　MT776-CP

Gloves made of synthetic leather "Galax (R)" that can withstand temperatures of 220°C while having flexible operability.

MAX CO., LTD.

Găng tay lắp ráp cho sạch 220 °C Correspondence (Long) Clean Pack Item　MT777-CP

Gloves made of synthetic leather "Galax (R)" that can withstand temperatures of 220°C while having flexible operability.