[RIKEN KEISOKUKI MFG.CO.,LTD] Tất cả các Sản phẩm
Nhà máy Công cụ & Vật tư
-
Thiết bị chế biến sản xuất
- theo nhóm Sản phẩm
- theo Sản phẩm
Sắp xếp theo:
-
Bộ so sánh quay số PH-3B Chiều cao: 48 PH3B
The surface used is quenched and finished with precision grinding.
For comparative measurement tests.1Đã tìm thấy sản phẩm
JPY: 53,250
USD: 333.79
-
Dial so sánh Tee Chiều cao: 50 RCT
Since it is made of stone, it does not rust and has excellent abrasion resistance.
For comparative measurement tests.1Đã tìm thấy sản phẩm
JPY: 60,750
USD: 380.81
-
So sánh quay số 2 Chiều cao: 35 MM-2
Precision grinding finish.
For comparative measurement tests.1Đã tìm thấy sản phẩm
JPY: 29,250
USD: 183.35
-
Độ chính xác phẳng (công cụ chung) RFL-1002
Used for assembling and leveling machines.
The surface used has a precision grinding finish.1Đã tìm thấy sản phẩm
JPY: 41,250
USD: 258.57
-
Độ nhạy từ 150mm 1 loại
2Đã tìm thấy sản phẩm
JPY: 264,750-
USD: 1,659.56-
-
Lập dị Tester P-loại Trung tâm Khoảng cách 150mm
3Đã tìm thấy sản phẩm
JPY: 156,750-
USD: 982.57-
-
Máy đo độ lệch HV HV
It can be measured in both the vertical and horizontal directions.
By removing the center and using the V-groove, the workpiece without the center hole can be measured.1Đã tìm thấy sản phẩm
JPY: 577,500
USD: 3,620.01
-
Bộ kiểm tra độ lệch NO1 NO1
The workpiece to be measured is attached to both centers and can be bent and eccentric.
Can handle relatively large work.1Đã tìm thấy sản phẩm
JPY: 249,750
USD: 1,565.54
-
Máy đo độ lệch NO3 NO3
The workpiece to be measured is attached to both centers and can be bent and eccentric.
Can handle relatively large work.1Đã tìm thấy sản phẩm
JPY: 1,443,750
USD: 9,050.02
-
Máy đo độ lệch NO2 NO2
The workpiece to be measured is attached to both centers and can be bent and eccentric.
Can handle relatively large work.1Đã tìm thấy sản phẩm
JPY: 589,500
USD: 3,695.23
-
Bộ so sánh Quay số PH2
Can measure curved workpiece.
The plane of the measurement plane is 0.01 mm.1Đã tìm thấy sản phẩm
JPY: 63,750
USD: 399.61
-
Máy đo độ lệch RB1 RB-1
The dial part can be moved back, forth, left, or right by the handle.
It can be easily moved to the measurement position of the object to be measured by the screw feed, and stable measurement value can be read.1Đã tìm thấy sản phẩm
JPY: 588,750
USD: 3,690.53
-
Loại phẳng chính xác (Máy tổng hợp) RFL1005 RFL-1005
Accuracy is an internal standard.
such as setting up or installing machinery.1Đã tìm thấy sản phẩm
JPY: 40,500
USD: 253.87
-
Loại phẳng chính xác (Máy tổng hợp) RFL1010 RFL-1010
Accuracy is an internal standard.
such as setting up or installing machinery.1Đã tìm thấy sản phẩm
JPY: 39,750
USD: 249.17
-
Nam châm tay HC RHMG-HC
Since it uses Arnico magnet, it is resistant to temperature change.
For removing iron powder, etc.1Đã tìm thấy sản phẩm
JPY: 9,900
USD: 62.06
-
[Đã ngừng]Khử từ RD1 RD1
For remanence demagnetization.
1Đã tìm thấy sản phẩm
JPY: 39,000
USD: 244.47

