Bunkaboeki Kogyo Co., Ltd.

Ống dài bubenda-10mm Thép không gỉ

Bunkaboeki Kogyo Co., Ltd.

90 ° Lever Loại ống Bender (Xử lý loại mô tả)

Bunkaboeki Kogyo Co., Ltd.

Ống bubenda-15mm đồng ống

Bunkaboeki Kogyo Co., Ltd.

Bộ khai triển　2526-45

As well as being lightweight, it can be swaged to close to a circle in one go.
After the tube is expanded, the head can be easily pulled out.

Bunkaboeki Kogyo Co., Ltd.

Chìa khoá mô-men xoắn Ratchet (1/4)

Bunkaboeki Kogyo Co., Ltd.

Bơm chân không trung bình

Bunkaboeki Kogyo Co., Ltd.

R-410A Van bi loại Manifold Kit　410-FMK

A kit with manifold for R410A/R32 and special hose for R410A in a carrying case for easy carrying.
Comes with a sight glass to visually check the condition of the refrigerant.

Bunkaboeki Kogyo Co., Ltd.

R-410A Van bi loại đơn Manifold Kit　W1-410BVK-2

It is a set with 3 charging hoses.
Ideal for room air conditioners with only low-voltage single service ports.

Bunkaboeki Kogyo Co., Ltd.

R-410A Manifold Kit phí Hose Trường hợp Kit　410-PMK

Manifold kit for R410A/R32.
The manifold body is thin and compact.

Bunkaboeki Kogyo Co., Ltd.

Ratchet nhà cung cấp thiết lập　RB-147W

Uses aluminum wheels.
Since it is made of aluminum, it is sturdy, and it eliminates the problem that the copper tube gets stuck after processing and hardly comes off.

Bunkaboeki Kogyo Co., Ltd.

Công Cụ Flare Siêu Nhẹ (Pit Tông Tích Hợp)　700-FNPA

With the sliding plunger positioning structure, when the fixed position of the yoke part slides, it stops at the appropriate position. (Utility Model Registration No. 3181779)
Aluminum alloy is extremely lightweight, about 50% the weight of conventional aluminum alloy. (our company ratio)

Bunkaboeki Kogyo Co., Ltd.

Half Edge tự động ống Cutter　TC-320S

The spring type blade feed mechanism realizes cutting that is hard to burr.
By making the cutting blade single-edged, copper tubes can be cut cleanly and efficiently.

Bunkaboeki Kogyo Co., Ltd.

Lưỡi dao thay thế cho máy cắt ống (Đối với TC-220S và TC-320S)　TC-320S-B2

Replacement blades for automatic tube cutters TC-220S and TC-320S.

Bunkaboeki Kogyo Co., Ltd.

Single-Edged tự động Mini ống Cutter　TC-220S

The automatic mechanism, which does not require the blade to be fed, makes cutting difficult to burr.
When the handle is tightened according to the material of the copper pipe, the copper pipe can be cut without further tightening the handle due to the stretching action of the built-in spring.

Bunkaboeki Kogyo Co., Ltd.

Công cụ bay nhẹ cho loại Ratchet　700-RPA

Built-in ratchet mechanism allows smooth switching.
The forward/reverse rotation changeover knob is mounted under the handle to prevent malfunction.

Bunkaboeki Kogyo Co., Ltd.

［Đã ngừng］Máy dò rò rỉ khí Freon gas cho độ nhạy phát hiện 20 g/năm (R-410A)　LS-790B

The lockout (automatic density storage) method enables easy detection of leakage sources.
You can set 10 sensitivity levels to accurately display the amount of leakage. (Bar graph LED display)

Bunkaboeki Kogyo Co., Ltd.

［Đã ngừng］Máy dò rò rỉ khí Freon gas cho độ nhạy phát hiện 7 g/năm (R-410A)　LS3000

Fully automatic, the amount of gas leakage is indicated by LED and the leakage area is indicated by alarm sound.
Sensor system.

Bunkaboeki Kogyo Co., Ltd.

［Đã ngừng］Tự động Mini ống Cutter

Bunkaboeki Kogyo Co., Ltd.

［Đã ngừng］Máy cắt ống tự động (Đặc điểm kỹ thuật lưỡi mã hóa titan)　TC320T

The spring type blade feed mechanism realizes cutting that is hard to burr.
Titanium coated blade.

Bunkaboeki Kogyo Co., Ltd.

［Đã ngừng］Ống Reamer đồng ở Bali chỉ　211-F

With 11 blades, it can be smoothly deburred with no deviation.
Deburring of copper, aluminum, brass and hard PVC pipes.

Bunkaboeki Kogyo Co., Ltd.

［Đã ngừng］Dầu eastfoliolo Carbon phục hồi thiết bị　RM300

This portable recovery machine is equipped with a 1 horsepower (750 W) compressor with a gas recovery capacity of 200 g or more per minute.
High speed and stable recovery is possible with a twin cylinder compressor.

Bunkaboeki Kogyo Co., Ltd.

［Đã ngừng］Thang sạc nhỏ gọn　BS500

It can measure up to a cylinder containing 20 kg of fluorocarbon (fluorocarbon gas).
Convenient dry battery (9V alkaline battery) and AC adaptor type.

Bunkaboeki Kogyo Co., Ltd.

［Đã ngừng］Đơn kỹ thuật số Manifold R-410A　WD2410CMB

The sensor detects negative pressure.
There is no need to worry about damage due to pressure like a normal vacuum gauge.

Bunkaboeki Kogyo Co., Ltd.

［Đã ngừng］Van bi kỹ thuật số Manifold　WD2410CMB2

The sensor detects negative pressure.
There is no need to worry about damage due to pressure like a normal vacuum gauge.

Bunkaboeki Kogyo Co., Ltd.

［Đã ngừng］Công cụ Ratchet vận hành bánh răng　1000-FN

The changeover knob type ratchet mechanism and the upward handle make it easier to operate.
The plunger type positioning structure stops the bar at the correct position.

Bunkaboeki Kogyo Co., Ltd.

［Đã ngừng］Slim mini đa tạp kỹ thuật số tập　WD3-32B

This digital manifold can measure from vacuum pressure (-0.100 MPa) to gas pressure (+5.000 MPa).
The weight of the manifold is about 40% lighter than conventional products.

Bunkaboeki Kogyo Co., Ltd.

［Đã ngừng］Slim mini đa tạp kỹ thuật số　WD3-32CMB

This digital manifold can measure from vacuum pressure (-0.100 MPa) to gas pressure (+5.000 MPa).
It is about 40% lighter than conventional products.

Bunkaboeki Kogyo Co., Ltd.

［Đã ngừng］Oilless fluorocarbon hệ thống phục hồi　RM330

It is an inverter type lightweight collection machine.
It is also strong in low voltage and voltage drop environments.

Bunkaboeki Kogyo Co., Ltd.

［Đã ngừng］thang sạc compact　LMC-200

Prevents malfunction due to static electricity.
Accurate gas filling every 5 grams is possible.