ASAHI ENGINEERING Co., Ltd.

Vibra-TITE VC-3 Liên hệ với bây giờ　1081

Coated parts can be stored indefinitely until use.
After application, the dried screw can be used in water.

ASAHI ENGINEERING Co., Ltd.

Gasket không cài đặt　0892

It is a non-solidifying liquid gasket that can be used for any fluid including fuel.
Since it does not harden, the assembly time is unlimited and it is easy to remove.

ASAHI ENGINEERING Co., Ltd.

Sửa chữa bê tông

ASAHI ENGINEERING Co., Ltd.

460 Nhiệt độ cao -Stainless thép Thread Sealant　0921

Compatible with high pressure of 68 MPa. A versatile anaerobic sealant that hardens by blocking air with excellent vibration, chemical and heat resistance.
Water, oil, air, gas, sprinklers, indoor and outdoor hydrants, water supply and drainage, refrigerants, oiling heat media, kerosene, antifreeze piping, etc.

ASAHI ENGINEERING Co., Ltd.

460 Nhiệt độ cao -Stainless thép Thread Sealant　0941

Use when you want to increase the curing speed of metal piping sealant.
For piping above 65 A.

ASAHI ENGINEERING Co., Ltd.

Keo dán nhanh2　1019

Holes, cracks and chips can be easily and strongly repaired.
If you pour liquid (polymer liquid adhesive) and powder (welding powder) on it, it will cure in about 10 seconds (24 hours if secondary processing is required).

ASAHI ENGINEERING Co., Ltd.

Bộ dụng cụ sửa chữa nhựa

ASAHI ENGINEERING Co., Ltd.

Bộ dụng cụ sửa chữa nhựa　1036

This is a repair kit that allows you to easily and quickly perform adhesive fill-in-the-hole plating.
Various materials such as radiators, headlamp units, bumpers and fuel tanks can be repaired.

ASAHI ENGINEERING Co., Ltd.

Bộ dụng cụ sửa chữa nhựa

ASAHI ENGINEERING Co., Ltd.

Bộ dụng cụ sửa chữa nhựa　1034

This is a repair kit that allows you to easily and quickly perform adhesive fill-in-the-hole plating.
Various materials such as radiators, headlamp units, bumpers and fuel tanks can be repaired.

ASAHI ENGINEERING Co., Ltd.

Bộ dụng cụ sửa chữa nhựa　1035

PRK Primer is a pretreatment agent for hard-to-adhere materials that can strongly adhere hard-to-adhere materials such as polypropylene (PP), EPDM, polyacetal (POM), and soft PVC (SPVC) in a short time.
Various materials such as radiators, headlamp units, bumpers and fuel tanks can be repaired.

ASAHI ENGINEERING Co., Ltd.

Keo dán nhanh2　1067

ASAHI ENGINEERING Co., Ltd.

Keo dán nhanh2　1069

ASAHI ENGINEERING Co., Ltd.

Đa sửa chữa Putty　1161

It does not require any special equipment or technology, just by mixing the main agent and the curing agent, it can be cured like a metal, and it can be easily filled in the hole, filled in the nest, plated, glued and repaired.
After complete curing, holes, threads, polishing, painting, etc. can be added, and since it is an electrically defective conductor, electrical corrosion does not occur even when repair between dissimilar metals is performed.

ASAHI ENGINEERING Co., Ltd.

［Đã ngừng］Đối với nhiệt độ cao Khả năng chịu nhiệt Patty kim loại nhiệt　1022

This product is a multi-purpose epoxy putty that hardens like metal just by cutting, kneading and sticking, and can easily repair cracks and holes in an emergency.
Can be used for most materials such as metal, plastic, ceramic, stone, PVC, FRP, concrete, etc.

ASAHI ENGINEERING Co., Ltd.

［Đã ngừng］Dưới nước chữa loại Patty kim loại nước　1024

It is a multi-purpose epoxy putty that hardens like a metal just by cutting, kneading and sticking, and can easily repair cracks and holes in an emergency.
Can be used for most materials such as metal, plastic, ceramic, stone, PVC, FRP, concrete, etc.

ASAHI ENGINEERING Co., Ltd.

［Đã ngừng］Chịu nhiệt xi măng muffler xi măng　1026

It has a heat resistance of 650°C and is suitable for repairing high-temperature parts.
Does not contain solvents or asbestos, does not burn even if a fire is brought close to it, and adheres well to materials such as metal, mortar and brick.

ASAHI ENGINEERING Co., Ltd.

［Đã ngừng］Đa sửa chữa Putty　1028

It is a multi-purpose epoxy putty that hardens like a metal just by cutting, kneading and sticking, and can easily repair cracks and holes in an emergency.
Can be used for most materials such as metal, plastic, ceramic, stone, PVC, FRP, concrete, etc.

ASAHI ENGINEERING Co., Ltd.

［Đã ngừng］Nhà sản xuất Gasket

ASAHI ENGINEERING Co., Ltd.

［Đã ngừng］Ánh sáng kim loại Putty　1027

It is a multi-purpose epoxy putty that hardens like a metal just by cutting, kneading and sticking, and can easily repair cracks and holes in an emergency.
Can be used for most materials such as metal, plastic, ceramic, stone, PVC, FRP, concrete, etc.

ASAHI ENGINEERING Co., Ltd.

［Đã ngừng］Gasket không cài đặt　0893

It is a non-solidifying liquid gasket that can be used for any fluid including fuel.
Since it does not harden, the assembly time is unlimited and it is easy to remove.

ASAHI ENGINEERING Co., Ltd.

［Đã ngừng］Nhà sản xuất Gasket

ASAHI ENGINEERING Co., Ltd.

［Đã ngừng］Bộ dụng cụ sửa chữa nhựa　1033

It is a repair kit that can easily and inexpensively and quickly perform adhesive fill-in-the-hole plating.
Various materials such as radiators, headlamp units, bumpers and fuel tanks can be repaired.