YUKO Corporation

#SC180 còi

YUKO Corporation

Chổi Quét Nhỏ

YUKO Corporation

KIC hạt mài mòn đầu vào Nylon Brush

YUKO Corporation

Sừng #AO240 BC10. 0

YUKO Corporation

Sừng #AO180 BC4. 0　BC-40AO180

YUKO Corporation

Sừng #SC320 BC64. 0　BC-640SC320

It is a structure in which a ball of sintered population abrasive grain is attached to a foot made of fiber resin that comes out from the shaft.
The feet are made of nylon resin and are highly elastic. The inner surface of the workpiece is burr and the inner surface of the workpiece with irregularities can be polished.

YUKO Corporation

Handy, bơm chân không

YUKO Corporation

Miniature Brush (bàn chải dây thép không gỉ)　81-A-0.6

Industrial manual super fine wire brush.
Use this product to remove burrs in cross holes of φ12 or less which cannot be covered by flex horn ®.

YUKO Corporation

Miniature Brush (bàn chải dây thép không gỉ)　81-A-0.8

Industrial manual super fine wire brush.
Use this product to remove burrs in cross holes of φ12 or less which cannot be covered by flex horn ®.

YUKO Corporation

Miniature Brush 81-AY Inc. (Bàn chải nylon chunky mài mòn)　81-AY-0.8

Ultra-fine nylon brush with abrasive grains.
It is attached to a drill and used with a right rotation of 1000rpm or less.

YUKO Corporation

Miniature Brush (bàn chải dây thép không gỉ)　81-B-10.0

Industrial manual super fine wire brush.
Use this product to remove burrs in cross holes of φ12 or less which cannot be covered by flex horn ®.

YUKO Corporation

Miniature Brush (bàn chải dây thép không gỉ)　81-B-11.0

Industrial manual super fine wire brush.
Use this product to remove burrs in cross holes of φ12 or less which cannot be covered by flex horn ®.

YUKO Corporation

Miniature Brush (bàn chải dây thép không gỉ)　81-B-12.0

Industrial manual super fine wire brush.
Use this product to remove burrs in cross holes of φ12 or less which cannot be covered by flex horn ®.

YUKO Corporation

Miniature Brush (bàn chải dây thép không gỉ)　81-B-7.0

Industrial manual super fine wire brush.
Use this product to remove burrs in cross holes of φ12 or less which cannot be covered by flex horn ®.

YUKO Corporation

Miniature Brush (bàn chải dây thép không gỉ)　81-B-8.0

Industrial manual super fine wire brush.
Use this product to remove burrs in cross holes of φ12 or less which cannot be covered by flex horn ®.

YUKO Corporation

Miniature Brush (bàn chải dây thép không gỉ)　81-B-9.0

Industrial manual super fine wire brush.
Use this product to remove burrs in cross holes of φ12 or less which cannot be covered by flex horn ®.

YUKO Corporation

Miniature Brush (cọ Nylon chunky mài mòn)　81-BY-10.0

Ultra-fine nylon brush with abrasive grains.
It is attached to a drill and used with a right rotation of 1000rpm or less.

YUKO Corporation

Miniature Brush (cọ Nylon chunky mài mòn)　81-BY-11.0

Ultra-fine nylon brush with abrasive grains.
It is attached to a drill and used with a right rotation of 1000rpm or less.

YUKO Corporation

Miniature Brush (cọ Nylon chunky mài mòn)　81-BY-12.0

Ultra-fine nylon brush with abrasive grains.
It is attached to a drill and used with a right rotation of 1000rpm or less.

YUKO Corporation

Miniature Brush (cọ Nylon chunky mài mòn)　81-BY-7.0

Ultra-fine nylon brush with abrasive grains.
It is attached to a drill and used with a right rotation of 1000rpm or less.

YUKO Corporation

Miniature Brush (cọ Nylon chunky mài mòn)　81-BY-8.0

Ultra-fine nylon brush with abrasive grains.
It is attached to a drill and used with a right rotation of 1000rpm or less.

YUKO Corporation

Miniature Brush (cọ Nylon chunky mài mòn)　81-BY-9.0

Ultra-fine nylon brush with abrasive grains.
It is attached to a drill and used with a right rotation of 1000rpm or less.

YUKO Corporation

#SC600 sừng Flex SC60　BC-10.0 SC600

It is a structure in which a ball of sintered population abrasive grain is attached to a foot made of fiber resin that comes out from the shaft.
The feet are made of nylon resin and are highly elastic. The inner surface of the workpiece is burr and the inner surface of the workpiece with irregularities can be polished.

YUKO Corporation

#SC60 sừng Flex SC60　BC-11.0 SC60

It is a structure in which a ball of sintered population abrasive grain is attached to a foot made of fiber resin that comes out from the shaft.
The feet are made of nylon resin and are highly elastic. The inner surface of the workpiece is burr and the inner surface of the workpiece with irregularities can be polished.

YUKO Corporation

Sừng #AO60 AO60　BC-12.0 AO60

It is a structure in which a ball of sintered population abrasive grain is attached to a foot made of fiber resin that comes out from the shaft.
The feet are made of nylon resin and are highly elastic. The inner surface of the workpiece is burr and the inner surface of the workpiece with irregularities can be polished.

YUKO Corporation

Sừng #AO180 AO18　BC-12.7 AO180

It is a structure in which a ball of sintered population abrasive grain is attached to a foot made of fiber resin that comes out from the shaft.
The feet are made of nylon resin and are highly elastic. The inner surface of the workpiece is burr and the inner surface of the workpiece with irregularities can be polished.

YUKO Corporation

Sừng #AO600 AO60　BC-12.7 AO600

It is a structure in which a ball of sintered population abrasive grain is attached to a foot made of fiber resin that comes out from the shaft.
The feet are made of nylon resin and are highly elastic. The inner surface of the workpiece is burr and the inner surface of the workpiece with irregularities can be polished.

YUKO Corporation

#SC600 sừng Flex SC60　BC-18.0 SC600

It is a structure in which a ball of sintered population abrasive grain is attached to a foot made of fiber resin that comes out from the shaft.
The feet are made of nylon resin and are highly elastic. The inner surface of the workpiece is burr and the inner surface of the workpiece with irregularities can be polished.

YUKO Corporation

Sừng #AO120 AO12　BC-19.0 AO120

It is a structure in which a ball of sintered population abrasive grain is attached to a foot made of fiber resin that comes out from the shaft.
The feet are made of nylon resin and are highly elastic. The inner surface of the workpiece is burr and the inner surface of the workpiece with irregularities can be polished.

YUKO Corporation

#SC600 sừng Flex SC60　BC-19.0 SC600

It is a structure in which a ball of sintered population abrasive grain is attached to a foot made of fiber resin that comes out from the shaft.
The feet are made of nylon resin and are highly elastic. The inner surface of the workpiece is burr and the inner surface of the workpiece with irregularities can be polished.

YUKO Corporation

Sừng #AO320 AO32　BC-22.0 AO320

It is a structure in which a ball of sintered population abrasive grain is attached to a foot made of fiber resin that comes out from the shaft.
The feet are made of nylon resin and are highly elastic. The inner surface of the workpiece is burr and the inner surface of the workpiece with irregularities can be polished.

YUKO Corporation

#SC120 sừng Flex SC12　BC-23.8 SC120

It is a structure in which a ball of sintered population abrasive grain is attached to a foot made of fiber resin that comes out from the shaft.
The feet are made of nylon resin and are highly elastic. The inner surface of the workpiece is burr and the inner surface of the workpiece with irregularities can be polished.

YUKO Corporation

Sừng #AO240 AO24　BC-25.4 AO240

It is a structure in which a ball of sintered population abrasive grain is attached to a foot made of fiber resin that comes out from the shaft.
The feet are made of nylon resin and are highly elastic. The inner surface of the workpiece is burr and the inner surface of the workpiece with irregularities can be polished.

YUKO Corporation

#SC60 sừng Flex SC60　BC-29.0 SC60

It is a structure in which a ball of sintered population abrasive grain is attached to a foot made of fiber resin that comes out from the shaft.
The feet are made of nylon resin and are highly elastic. The inner surface of the workpiece is burr and the inner surface of the workpiece with irregularities can be polished.

YUKO Corporation

#SC320 sừng Flex SC32　BC-35.0 SC320

It is a structure in which a ball of sintered population abrasive grain is attached to a foot made of fiber resin that comes out from the shaft.
The feet are made of nylon resin and are highly elastic. The inner surface of the workpiece is burr and the inner surface of the workpiece with irregularities can be polished.

YUKO Corporation

#SC60 sừng Flex SC60　BC-35.0 SC60

It is a structure in which a ball of sintered population abrasive grain is attached to a foot made of fiber resin that comes out from the shaft.
The feet are made of nylon resin and are highly elastic. The inner surface of the workpiece is burr and the inner surface of the workpiece with irregularities can be polished.

YUKO Corporation

#SC180 sừng Flex SC18　BC-4.5 SC180

It is a structure in which a ball of sintered population abrasive grain is attached to a foot made of fiber resin that comes out from the shaft.
The feet are made of nylon resin and are highly elastic. The inner surface of the workpiece is burr and the inner surface of the workpiece with irregularities can be polished.

YUKO Corporation

#SC320 sừng Flex SC32　BC-41.0 SC320

It is a structure in which a ball of sintered population abrasive grain is attached to a foot made of fiber resin that comes out from the shaft.
The feet are made of nylon resin and are highly elastic. The inner surface of the workpiece is burr and the inner surface of the workpiece with irregularities can be polished.

YUKO Corporation

Sừng #AO240 AO24　BC-5.0 AO240

It is a structure in which a ball of sintered population abrasive grain is attached to a foot made of fiber resin that comes out from the shaft.
The feet are made of nylon resin and are highly elastic. The inner surface of the workpiece is burr and the inner surface of the workpiece with irregularities can be polished.

YUKO Corporation

Sừng #AO120 AO12　BC-51.0 AO120

It is a structure in which a ball of sintered population abrasive grain is attached to a foot made of fiber resin that comes out from the shaft.
The feet are made of nylon resin and are highly elastic. The inner surface of the workpiece is burr and the inner surface of the workpiece with irregularities can be polished.