NOGAJAPAN Ltd.

Tiêu chuẩn Cobra Kit

NOGAJAPAN Ltd.

Xe Độc Mã

NOGAJAPAN Ltd.

Moth Loại phổ biến Magnet Base Adsorption force (N): 800　MB1035

Widespread magnet base without slight motion feed.

NOGAJAPAN Ltd.

Moth Loại phổ biến Magnet Base Adsorption force (N): 800　MB1030

Popular magnet base with fine motion feed.

NOGAJAPAN Ltd.

Kẹp Loại Dial Gauge chủ Lực hấp phụ (N): 800　PH2040

You can adjust the zero point of the gauge immediately with the hand fine motion feed mechanism.
This is a strut type holder that strongly locks the secondary column with a 3-point tightening special clamp.

NOGAJAPAN Ltd.

Popeye Stands Lực hấp phụ (N): 320　PH3100

You can adjust the zero point of the gauge immediately with the hand fine motion feed mechanism.
This is a strut type holder that strongly locks the secondary column with a 3-point tightening special clamp.

NOGAJAPAN Ltd.

Trọng lượng lớp kẹp Loại Dial Gauge Lực hấp phụ (N): 1000　PH4016

You can adjust the zero point of the gauge immediately with the hand fine motion feed mechanism.
This is a strut type holder that strongly locks the secondary column with a 3-point tightening special clamp.

NOGAJAPAN Ltd.

PH Mini Holder của lực hấp phụ thiết bị Laser (N): 150　PH5000

This is a strut type holder that strongly locks the secondary column with a 3-point tightening special clamp.

NOGAJAPAN Ltd.

Lực hấp phụ Popeye Flex (N): 320　NF1021

Since the gauge's fine motion feed device is located just above the magnet, zero point alignment of the gauge can be achieved instantly without shaking.
The fine adjustment screw can be moved all around so that the gauge can be inclined in any direction by 360°.

NOGAJAPAN Ltd.

Người giữ mini của lực hấp phụ thiết bị laser (N): 320

NOGAJAPAN Ltd.

Lực hấp phụ Popeye Flex (N): 320

NOGAJAPAN Ltd.

LC Mini Chủ của lực hấp phụ thiết bị Laser (N): 150　LC6200

By tightening the knob in the center, the three joints are locked tightly.
A mini holder with a round shape and powerful (20kgf) small magnet.

NOGAJAPAN Ltd.

Người giữ DG của Thiết bị Laser Lực hấp phụ điều chỉnh kép (N): 800　DG6160

By tightening the knob in the center, the three joints are locked tightly.
Fine adjustment screws are attached just above the magnet and at the tip of the arm, so you can make fine adjustments in any two directions.

NOGAJAPAN Ltd.

Trọng lượng lớp Dial Gauge chủ Adsorption lực lượng (N): 800　MG61003

By tightening the knob in the center, the three joints are locked tightly.
The tip fine adjustment mechanism makes zero point alignment easy.

NOGAJAPAN Ltd.

Trọng lượng lớp Dial Gauge Chủ của Thiết bị Laser Lực hấp phụ (N): 800　MG10503

Since the one-touch hand fine motion feed mechanism is attached just above the magnet, the zero point alignment of the gauge can be made instantly without touching the arm.
The arm joint type holder tightens the knob in the center to firmly lock the three joints.

NOGAJAPAN Ltd.

Chai Lực hấp phụ (N): 1300　MA61003

The tip fine adjustment mechanism makes zero point alignment easy.
By tightening the knob in the center, the three joints are locked tightly.

NOGAJAPAN Ltd.

Với đèn LED Magnifier (loại nam châm) Lực hấp phụ (N): 800　LED5000M

A double lens (2 lenses) with a magnification of 5x is equipped with an unconventional LED brightness.
With LED lights that illuminate the center of the lens brightly, you can work without worrying about the lighting around you.

NOGAJAPAN Ltd.

Lực hút nam châm bật tắt (N): 170

NOGAJAPAN Ltd.

Chiều dài cánh tay Flex: 56x51x21,5

NOGAJAPAN Ltd.

Đèn Satay I Mini

NOGAJAPAN Ltd.

Moth LED đứng Magnifier với đứng bánh rán LED　LED6400

LED stand with magnifier.
Can also be used as a lighting stand by removing the lens unit from the magnifier with LED for tabletop.

NOGAJAPAN Ltd.

2mm mát Arm Nozzle cho　CA1002

NOGAJAPAN Ltd.

4mm mát Arm Nozzle cho　CA1004

NOGAJAPAN Ltd.

6mm mát Arm Nozzle cho　CA1006

NOGAJAPAN Ltd.

Đối với cánh tay mát áp lực cao chuyên dụng 6 phím (5mm)　CA1010

NOGAJAPAN Ltd.

Đối với cánh tay mát áp lực cao　CA2000

It can be equipped with 3 different sized nozzles and can supply coolant at high pressures up to 1000PSI (70 bar).
The arm can be adjusted quickly and easily.

NOGAJAPAN Ltd.

Đối với cánh tay mát áp lực cao　CA3000

It can be equipped with 3 different sized nozzles and can supply coolant at high pressures up to 1000PSI (70 bar).
The arm can be adjusted quickly and easily.

NOGAJAPAN Ltd.

Khối 16000 n cánh tay ngắn　KM06-020

The clamp height can be easily adjusted without using a height adjustment block or adjustment plate, and a constant clamp force is maintained.
Clamping system for machine tools, etc.

NOGAJAPAN Ltd.

Khối 12000 n Long Arm　KM06-030

The clamp height can be easily adjusted without using a height adjustment block or adjustment plate, and a constant clamp force is maintained.
Clamping system for machine tools, etc.

NOGAJAPAN Ltd.

Khối 8000 n thêm cánh tay dài　KM06-035

The clamp height can be easily adjusted without using a height adjustment block or adjustment plate, and a constant clamp force is maintained.

NOGAJAPAN Ltd.

Chuỗi Klan pin glycol bộ máy　KM06-040

By applying a uniform clamping force to the entire workpiece, chain clamping makes it easy to secure large workpieces while preventing distortion.
Using a 16000 N monoblock, you can clamp the workpiece quickly and forcefully by rotating the clamp key.

NOGAJAPAN Ltd.

Chuỗi Klan pin glycol bộ máy　KM06-043

By applying a uniform clamping force to the entire workpiece, chain clamping makes it easy to secure large workpieces while preventing distortion.
Using a 16000 N monoblock, you can clamp the workpiece quickly and forcefully by rotating the clamp key.

NOGAJAPAN Ltd.

Chuỗi Klan pin glycol bộ máy　KM06-044

By applying a uniform clamping force to the entire workpiece, chain clamping makes it easy to secure large workpieces while preventing distortion.
Using a 16000 N monoblock, you can clamp the workpiece quickly and forcefully by rotating the clamp key.

NOGAJAPAN Ltd.

Khối riser khối　KM06-050

When clamping a work piece with height, it is stacked in a monoblock.

NOGAJAPAN Ltd.

Khối hộp Set 12000 n　KM06-100

The clamp height can be easily adjusted without using a height adjustment block or adjustment plate, and a constant clamp force is maintained.
It can be easily fixed to a table with a T-slot or a table with a threaded hole with a tightening screw.

NOGAJAPAN Ltd.

Khối hộp Set 16000 n　KM06-110

The clamp height can be easily adjusted without using a height adjustment block or adjustment plate, and a constant clamp force is maintained.
It can be easily fixed to a table with a T-slot or a table with a threaded hole with a tightening screw.

NOGAJAPAN Ltd.

Piccolo 6500 n　KM07-020

The clamp height can be easily adjusted without using a height adjustment block or adjustment plate, and a constant clamp force is maintained.
Strong clamping force despite its compact size.

NOGAJAPAN Ltd.

Piccolo 4000 n　KM07-025

The clamp height can be easily adjusted without using a height adjustment block or adjustment plate, and a constant clamp force is maintained.
Strong clamping force despite its compact size.

NOGAJAPAN Ltd.

Khối nâng Piccolo　KM07-030

When clamping a work piece with height, it is stacked in piccolo.
Strong clamping force despite its compact size.

NOGAJAPAN Ltd.

Bộ hộp Piccolo 6500 n　KM07-100

The clamp height can be easily adjusted without using a height adjustment block or adjustment plate, and a constant clamp force is maintained.
Strong clamping force despite its compact size