[NISHIGAKI INDUSTRIAL Co., Ltd.] Tất cả các Sản phẩm
Nhà máy Công cụ & Vật tư
-
Dụng cụ làm việc, Vật tư
-
Thiết bị nhà ở văn phòng
- theo nhóm Sản phẩm
- theo Sản phẩm
Sắp xếp theo:
-
NISHIGAKI INDUSTRIAL Co., Ltd.
Albatross viện nến loại xi măng cacbua
2Đã tìm thấy sản phẩm
JPY: 7,693-
USD: 48.22-
-
NISHIGAKI INDUSTRIAL Co., Ltd.
Albatross viện nến loại thép tốc độ cao
2Đã tìm thấy sản phẩm
JPY: 7,693-
USD: 48.22-
-
NISHIGAKI INDUSTRIAL Co., Ltd.
Gắn kim cương mài đá 4mm
2Đã tìm thấy sản phẩm
JPY: 1,150-
USD: 7.21-
-
-
NISHIGAKI INDUSTRIAL Co., Ltd.
Cắt vòng (an toàn Rotation clipper) N-830
Can be attached to a commercially available shoulder-mounted mower.
Low speed vertical blade reverse rotation scissors type, so there is no scattering of stones or empty cans.1Đã tìm thấy sản phẩm
JPY: 41,000
USD: 257.01
-
NISHIGAKI INDUSTRIAL Co., Ltd.
Phòng thí nghiệm nghiên cứu cưa xích
2Đã tìm thấy sản phẩm
JPY: 7,096-
USD: 44.48-
-
NISHIGAKI INDUSTRIAL Co., Ltd.
Viện Albatross X26 N-874
Just insert the chuck into the cutting edge setter and set the cutting edge.
You can polish the cutting edge just by inserting it into the cutting edge polishing port.1Đã tìm thấy sản phẩm
JPY: 326,923
USD: 2,049.29
-
NISHIGAKI INDUSTRIAL Co., Ltd.
Clipper nhanh Mini 5 lưỡi cho lưỡi dao thay thế N-8801
1Đã tìm thấy sản phẩm
JPY: 5,289
USD: 33.15
-
NISHIGAKI INDUSTRIAL Co., Ltd.
Clipper nhanh Mini 7 lưỡi cho lưỡi dao thay thế N-8811
Applicable Model: N-881
1Đã tìm thấy sản phẩm
JPY: 7,404
USD: 46.41
-
NISHIGAKI INDUSTRIAL Co., Ltd.
viện Albatross x26 cho đá mài 118 độ N-8741
Dedicated whetstone for Doriken X26.
Iron and stainless steel drills can be polished.1Đã tìm thấy sản phẩm
JPY: 18,654
USD: 116.93
-
NISHIGAKI INDUSTRIAL Co., Ltd.
viện Albatross x26 cho đá mài 135 độ N-8742
Dedicated whetstone for Doriken X26.
Iron and stainless steel drills can be polished.1Đã tìm thấy sản phẩm
JPY: 18,654
USD: 116.93
-
NISHIGAKI INDUSTRIAL Co., Ltd.
Máy mài X14 với Chuck N-500
After setting the cutting edge, you can polish by just inserting it into the polishing machine body.
Can perform X-type thinning polishing.1Đã tìm thấy sản phẩm
JPY: 62,300
USD: 390.52
-
NISHIGAKI INDUSTRIAL Co., Ltd.
Bánh mài cho DorikenX14 118 ° N-500-1
Grindstone for drill polisher "Dorigen X14."
The cutting edge polishing angle is 118°.1Đã tìm thấy sản phẩm
JPY: 5,470
USD: 34.29
-
NISHIGAKI INDUSTRIAL Co., Ltd.
Máy mài X14 với AB Chuck N-501
After setting the cutting edge, you can polish by just inserting it into the polishing machine body.
Hex shaft drill can also be polished.1Đã tìm thấy sản phẩm
JPY: 66,700
USD: 418.10
-
NISHIGAKI INDUSTRIAL Co., Ltd.
Máy mài X14 với Chuck
2Đã tìm thấy sản phẩm
JPY: 62,300-
USD: 390.52-
-
NISHIGAKI INDUSTRIAL Co., Ltd.
Clippers blade bảng N-828-2
A holding stand for plant-planting clippers, etc.
1Đã tìm thấy sản phẩm
JPY: 3,200
USD: 20.06
-
NISHIGAKI INDUSTRIAL Co., Ltd.
Clippers máy đánh bóng N-829
You can polish with the clipper blade attached to the machine.
Due to low speed rotation, there is no reburn of the blade.1Đã tìm thấy sản phẩm
JPY: 15,700
USD: 98.41
-
NISHIGAKI INDUSTRIAL Co., Ltd.
Drill mài với một Chuck
2Đã tìm thấy sản phẩm
JPY: 35,900-
USD: 225.04-
-
NISHIGAKI INDUSTRIAL Co., Ltd.
Bánh xe Sharpening cho Doriken N-860-1
A grindstone for the "Dori Kenace" drill polisher.
1Đã tìm thấy sản phẩm
JPY: 5,540
USD: 34.73
-
NISHIGAKI INDUSTRIAL Co., Ltd.
Máy mài X20 N-896
After setting the cutting edge, you can polish by simply inserting it into the polishing machine body.
X-type thinning polishing is possible.1Đã tìm thấy sản phẩm
JPY: 101,000
USD: 633.11
-
NISHIGAKI INDUSTRIAL Co., Ltd.
Bánh mài cho DorikenX20 N-896-1
Grindstone for drill polisher "Dorigen X20."
1Đã tìm thấy sản phẩm
JPY: 13,400
USD: 84.00
-
NISHIGAKI INDUSTRIAL Co., Ltd.
Bộ collet cho DorikenX20 N-896-4
Collet set for drill polisher "Doriken X20."
1Đã tìm thấy sản phẩm
JPY: 39,600
USD: 248.23
-
NISHIGAKI INDUSTRIAL Co., Ltd.
Bộ lưỡi dao (lưỡi 40 mm) N-912-1
40 mm branches will be cut.
1Đã tìm thấy sản phẩm
JPY: 3,370
USD: 21.13
-
NISHIGAKI INDUSTRIAL Co., Ltd.
Góc Adjuster N-798
Can be attached to your mower.
One lever changes the angle.1Đã tìm thấy sản phẩm
JPY: 22,885
USD: 143.45
-
NISHIGAKI INDUSTRIAL Co., Ltd.
[Đã ngừng]Viện Albatross DX N846DX
Just insert the chuck into the polishing machine body.
Hex shaft ironwork drill can also be polished.1Đã tìm thấy sản phẩm
JPY: 15,000
USD: 94.03
-
NISHIGAKI INDUSTRIAL Co., Ltd.
[Đã ngừng]Albatross viện X mỏng một chuck N-848
Just insert the chuck into the cutting edge setter and set the cutting edge.
You can polish the cutting edge just by inserting it into the cutting edge polishing port.1Đã tìm thấy sản phẩm
JPY: 40,250
USD: 252.30
-
NISHIGAKI INDUSTRIAL Co., Ltd.
[Đã ngừng]Albatross viện X mỏng A+ B chuck N-849
Just insert the chuck into the cutting edge setter and set the cutting edge.
You can polish the cutting edge just by inserting it into the cutting edge polishing port.1Đã tìm thấy sản phẩm
JPY: 43,750
USD: 274.24
-
NISHIGAKI INDUSTRIAL Co., Ltd.
[Đã ngừng]Cắt vòng R N837
Can be attached to a commercially available shoulder-mounted mower.
Low speed vertical blade reverse rotation scissors type, so there is no scattering of stones or empty cans.1Đã tìm thấy sản phẩm
JPY: 33,000
USD: 206.86
-
NISHIGAKI INDUSTRIAL Co., Ltd.
[Đã ngừng]Viện Albatross x N8481
Dedicated whetstone for Doriken X thinning.
Iron and stainless steel drills can be polished.1Đã tìm thấy sản phẩm
JPY: 3,750
USD: 23.51
-
NISHIGAKI INDUSTRIAL Co., Ltd.
[Đã ngừng]Albatross viện S mỏng cho thay thế mài đá N-8761
About 300 6.5 mm iron drill can be polished.
For polishing high speed drills, cobalt drills and titanium coated drills.1Đã tìm thấy sản phẩm
JPY: 3,500
USD: 21.94
-
NISHIGAKI INDUSTRIAL Co., Ltd.
[Đã ngừng]Albatross viện S mỏng AB loại N877
It is easy to set by turning the cutting edge to the predetermined position.
Simply insert the chuck into the body of the polishing machine.1Đã tìm thấy sản phẩm
JPY: 21,250
USD: 133.20
-
NISHIGAKI INDUSTRIAL Co., Ltd.
[Đã ngừng]nhựa sạch hơn N-250
It removes sap and dirt stuck on garden tools such as clippers, scissors, and saws surprisingly well.
For cutting tool sap and stain removal.1Đã tìm thấy sản phẩm
JPY: 1,063
USD: 6.66
-
NISHIGAKI INDUSTRIAL Co., Ltd.
[Đã ngừng]Pin-Powered Chi nhánh Secateurs 750
4Đã tìm thấy sản phẩm
JPY: 53,875-
USD: 337.71-

