Snap-on Tools Japan K.K.

Double Head Flare Nut Wrench for Height 6 Point 9 x 11 mm

Snap-on Tools Japan K.K.

Single-Eyed Single-Mouth Wrench Inch 11 Pieces Set　111Z11T

Both wrench and glasses have an offset angle of 15 degrees.
The size is the same, short type.

Snap-on Tools Japan K.K.

Single-Eyed Single-Mouth Wrench Inch 8-piece Set　111Z8T

Both wrench and glasses have an offset angle of 15 degrees.
The size is the same, short type.

Snap-on Tools Japan K.K.

Double Head Flare Nut Wrench for Height 6-Point 5-Piece Set　11692TH

This is the work at height series.
Does not damage the connecting fittings of pipes and tubes.

Snap-on Tools Japan K.K.

Single-Eyed Single-Mouth Wrench 8 Pieces Set　11MS8

Both wrench and glasses have an offset angle of 15 degrees.
The size is the same and it is a long type.

Snap-on Tools Japan K.K.

Ratchet Combination Wrench for Height 12 Point 9 mm

Snap-on Tools Japan K.K.

Striking Single-ended Wrench 100 mm

Snap-on Tools Japan K.K.

Single-Eyed Single-Mouth Wrench Inch 11 Pieces Set　1952Z11T

15° wrench, 10° glasses.
The outer diameter of the eyeglasses section is thin, easy to use in tight places, and uses a dynamic drive that does not chip corners.

Snap-on Tools Japan K.K.

1000 V Insulated Specification Hex Wrench 3 mm

Snap-on Tools Japan K.K.

1000 V Strong Type Nipper for Both Soft and Hard Wires

Snap-on Tools Japan K.K.

1000 V Insulated Wire Slip Ring Pliers　2223V160

1000 V insulation specification.
European standard EN60900 compliant product.

Snap-on Tools Japan K.K.

1000 V Flat Nose Pliers　2421V160

1000 V insulation specification.
European standard EN60900 compliant product.

Snap-on Tools Japan K.K.

1000 V Insulated Long Nose Pliers 200 mm　2427V200

1000 V insulation specification.
European standard EN60900 compliant product.

Snap-on Tools Japan K.K.

1000 V Insulated, Long Nose Radio Pincers 160 mm

Snap-on Tools Japan K.K.

Ergo xử lý nam châm linh hoạt

Snap-on Tools Japan K.K.

1000 V Insulated Type T Socket Handle 11 mm

Snap-on Tools Japan K.K.

Cưa lỗ (SUPERIOR, Φ102mm)

Snap-on Tools Japan K.K.

Lỗ Saw (SUPERIOR, Φ30mm hoặc ít hơn)　3834-ARBR-9100EL

Since the arbor part moves, the chips are pushed out, and the working time is shortened.
Protects hands from heat when cutting flour.

Snap-on Tools Japan K.K.

Cưa lỗ (SUPERIOR, Φ32mm)　3834-ARBR-930EL

Since the arbor part moves, the chips are pushed out, and the working time is shortened.
Protects hands from heat when cutting flour.

Snap-on Tools Japan K.K.

Arbor (Đối với cưa lỗ lưỡng kim, hơn 32mm)　3834-ARBR-930ES

This is the Sandoz Flex Series from Barco.
Since the arbor part moves, the chips are pushed out, and the working time is shortened.

Snap-on Tools Japan K.K.

Lưỡi thay thế Arbor (SUPERIOR Lỗ Saw, Φ30mm hoặc ít hơn)　3834-DRL-EL

Since the arbor part moves, the chips are pushed out, and the working time is shortened.
Protects hands from heat when cutting flour.

Snap-on Tools Japan K.K.

Bimet Arbor thay thế Blade (30mm hoặc ít hơn)　3834-DRL-ES

This is the Sandoz Flex Series from Barco.
Since the arbor part moves, the chips are pushed out, and the working time is shortened.

Snap-on Tools Japan K.K.

High Height Gasket Scraper 150 mm　40000TH

This is the work at height series.
The bi-molded handle provides a comfortable grip and reduces hand fatigue.

Snap-on Tools Japan K.K.

Compact Ergo 119 mm　4231

Blade angle 20°.

Snap-on Tools Japan K.K.

Mở túi cứng dưới loại　4750FB1-19A

The bottom is completely waterproof.
The grip is easy to grip and easy to carry, so you won't feel cold when it's cold.

Snap-on Tools Japan K.K.

Nắp trên cùng với Open Bag đáy cứng Loại　4750FB1-19B

The Velcro strap, which stops the cover, can be used with the bag open when needed.
Comes with a pocket for a screwdriver on the outside.

Snap-on Tools Japan K.K.

Với Zipper mở túi cứng dưới Loại

Snap-on Tools Japan K.K.

Túi xách　4750FB2W-24A

There is a Velcro to stop long items, and it can be safely fixed and removed quickly.
The big side pouch contains plastic boxes for small consumables such as screws, nuts, washers, and terminals.

Snap-on Tools Japan K.K.

Thợ điện cho Túi cứng dưới Loại　4750FB3-12

Comes with a loop holder for carabiners.
Handles that are comfortable to the hand and have excellent durability.

Snap-on Tools Japan K.K.

PC & công cụ Túi đáy cứng Loại　4750FB4-18

The inside large and small pockets can hold tools.
Comes with a removable compartment.

Snap-on Tools Japan K.K.

Công cụ cho công cụ chức năng Túi M

Snap-on Tools Japan K.K.

Leather Toolback　4750FOLTC1

This is a European style leather bag.

Snap-on Tools Japan K.K.

Độ cao làm việc Hammer Holder của thiết bị Laser　4750-HHO-2

For hammer holder for work at height.
It has a ring for a lanyard.

Snap-on Tools Japan K.K.

Đặc điểm kỹ thuật nặng Hộp nhựa

Snap-on Tools Japan K.K.

attache case　4750RCHD01

BAKO HD series that can withstand heavy use.
Protects contents from water and dust.

Snap-on Tools Japan K.K.

Attache case for tool　4750RCHD011

BAKO HD series that can withstand heavy use.
Comes with a partition for storing tools.

Snap-on Tools Japan K.K.

4750 RCWD4 cho ổ khóa　4750RCHD-AC1

Padlock for 4750RCWD4.

Snap-on Tools Japan K.K.

4 giai đoạn cứng nhắc Caster Case　4750RCWD4

Uses a latching system to prevent sudden jumping out.
The drawer layout can be changed freely.

Snap-on Tools Japan K.K.

Xoay Caster　4750RCWD-AC1

Swivel caster for 4750RCWD4.

Snap-on Tools Japan K.K.

Phụ kiện loại hiên　4750RCWD-AC2

Partition accessory with 9 tool pouches for 4750RCWD4.