IKK

Tàu điện ngầm　6CD5102

It is a high quality core bit that has both outstanding perforation and durability.
Ideal for drilling electrical installations, equipment and site work.

IKK

Tay bender　HB16W

Can bend freely from 0 to 135 degrees without any steps.
Up to 3 pieces of D10 rebar and 2 pieces of D13 rebar can be bent simultaneously.

IKK

THANH MỞ RỘNG CHIỀU DÀI HIỆU QUẢ 200mm (A ROD)

IKK

CHỈ BIT (CỦA 3 MẢNH) 28mm

IKK

CHỈ BIT (CỦA 3 MẢNH) 128mm　6CD3706

It is a high quality core bit that has both outstanding perforation and durability.
Ideal for drilling electrical installations, equipment and site work.

IKK

CORE BIT (1 MẢNH) 52mm

IKK

CHỈ ỐNG (CỦA 3-PIECE) 28mm

IKK

Chỉ ống (của 3-mảnh) 128mm

IKK

CHỈ ADAPTER (CỦA 3-PIECE) 28mm

IKK

Khoan kim cương　CD-160

Built-in clutch mechanism prevents gear breakage during drilling.
The motor is double insulated for peace of mind.

IKK

Máy Bender Hạng Nặng　DBD25H

Supports rebar up to SD490/D25.
Professional specification that can be used even in harsh environments.

IKK

Tiện dụng Bender cắt　DBC16H

Rebar up to SD390/D16 can be machined.
Maximum bend angle of 180 degrees, combination of vendor and cutter.

IKK

Máy cắt Bender nặng　DBC25X

Stationary vendor cutter capable of cutting and bending rebar up to 25 mm.
Bending and cutting can be switched with a single switch.

IKK

Máy ép cốt thép

IKK

Cốt thép Bender　DBS13

It is possible to process the thread instantly.
Reduces the load on the lower back of the worker. Quick continuous work is possible just by pressing the switch.

IKK

Cốt thép Bender　DBS16H

Can bend 65 mm from the wall.
SD490 rebar can be supported by using optional parts.

IKK

Máy cắt Heavy Duty　DC22HD

Light, fast and small with double insulated motor.
Rebar cutter capable of cutting up to 22 mm.

IKK

Neo Neo Cutter　DC22T

You can cut 45 degrees just by tilting the body.
Rebar can be cut to D22 and all screw bolts to M22.

IKK

Máy cắt Heavy Duty　DC25X

Pistons are reinforced to prevent distortion due to pressure during high-strength rebar cutting.
The optional PC steel cutter block (1 C19112) can also be used to cut SD490 rebar.

IKK

Máy cắt không dây

IKK

Máy cắt điện　DPC16R

Hydraulic compact rebar cutter without power supply.
Head 360 degree rotation type, can be used even in small places.

IKK

Trình điều khiển sau

IKK

Vách Đá　DS230XM

It can be used with a 100 V power supply and is small enough to be carried by one person.
There is no high pressure hose or hydraulic unit, so you can move safely and easily.

IKK

Kỹ thuật số Bender

IKK

Hacker Đôi　DWH1316HP

It's a flexible hacker with a push button. (695~1020 mm)
Rebar can be flexibly bent.

IKK

Nhỏ đục lỗ　EP-1475V

A 10.4 kg lightweight hydraulic puncher that can be machined on the back (H side) of grooved steel.
Up to 6mm of general steel and 5mm of stainless steel can be processed.

IKK

Người bỏ phiếu kênh　EP-1550S

The height is 50 mm.
A hole is drilled in the center with a width of 100 mm.

IKK

Puncher không dây　EPC-1538BLH

With the 36 V battery, the maximum number of holes per charge has increased.
The weight is reduced by 6.8 kg including the battery, and the 360 degree rotary head is ideal for narrow place work.

IKK

［Đã ngừng］Khoan Lõi Lát　CD40T

Holes can be easily made on hard materials (porcelain, granite, etc.).
When drilling tiles, etc., accurate drilling is possible without cracks.

IKK

［Đã ngừng］Máy cắt Heavy Duty　DC20DW

D-type handle type supports cutting up to SD390 D19.
2 pieces of rebar up to D13 can be cut simultaneously.

IKK

［Đã ngừng］Máy cắt Heavy Duty　DC32WH

It can cut thick reinforcing bar of 32 mm with standard blade.
Standard blade supports cutting of SD390.

IKK

［Đã ngừng］Flush cắt　DFC-20T

Cut difficult, narrow and narrow places and unnecessary reinforcing bars with a spatula.
Can be cut cleanly with little spark.

IKK

［Đã ngừng］Flush cắt　DFC25BL

Suitable for removing anchor bolts and cutting rebar.
High durability, long life, and maintenance-free.