[HIRAI TOOL CORPORATION] Tất cả các Sản phẩm
Dụng cụ & Vật tư Lab
-
Thiết bị phòng thí nghiệm
-
Vật tư Khẩn cấp
Nhà máy Công cụ & Vật tư
-
Dụng cụ làm việc, Vật tư
-
Thiết bị chế biến sản xuất
- theo nhóm Sản phẩm
- theo Sản phẩm
Sắp xếp theo:
-
Công cụ Mag Catch
2Đã tìm thấy sản phẩm
JPY: 1,357-
USD: 8.51-
-
Cao su Grip Driver tấm cà tím 6.3 x 100mm
8Đã tìm thấy sản phẩm
JPY: 486-
USD: 3.05-
-
Cushion Electric Works Trình điều khiển tấm cà tím 6.0 x 100mm
6Đã tìm thấy sản phẩm
JPY: 471-
USD: 2.95-
-
Trục vuông thông qua Driver mạnh mẽ
6Đã tìm thấy sản phẩm
JPY: 443-
USD: 2.78-
-
2 cách đệm stubee D-37W
Cushion handle with shibboleth to suppress slippage of hands.
The insertion part is 6.35 mm.1Đã tìm thấy sản phẩm
JPY: 493
USD: 3.09
-
Cushion ratchet ánh sáng, doanh D-88J
It glows in the dark, so you can avoid losing it.
This is a normal size ratchet type bit replacement type driver with joints attached to the D-88.1Đã tìm thấy sản phẩm
JPY: 2,027
USD: 12.71
-
Nut điều khiển
15Đã tìm thấy sản phẩm
JPY: 410-
USD: 2.57-
-
Bis bắt lái xe-4,3mm x 200mm
2Đã tìm thấy sản phẩm
JPY: 436-
USD: 2.73-
-
Trình điều khiển chiều rộng rộng
2Đã tìm thấy sản phẩm
JPY: 857-
USD: 5.37-
-
Hook công cụ L loại D-HK1
The L-shaped tip can be used for various tasks such as removing dust and removing hoses.
1Đã tìm thấy sản phẩm
JPY: 857
USD: 5.37
-
Hook công cụ Hook loại D-HK2
The tip part is bent into a hook shape, so it is convenient to use for various purposes such as removing garbage and drawing out hoses.
For pulling out hoses used in automobiles, maintenance of machinery, removal of garbage, etc.1Đã tìm thấy sản phẩm
JPY: 857
USD: 5.37
-
Eldora D-19
Since it is bent at 20 mm below the neck, it can be tightened at corner corners where a normal driver cannot enter or in places where there are narrow obstacles.
The shaft has a fully quenched black point processing magnet.1Đã tìm thấy sản phẩm
JPY: 450
USD: 2.82
-
Hồ bơi đính kèm (kuginuki) D-16
All-purpose strong tool with full body quenching type through angular shaft.
Comes with a hammer.1Đã tìm thấy sản phẩm
JPY: 1,071
USD: 6.71
-
Kẻ tấn công dài (công cụ nhóm phổ dụng) D-15L
Comes with a hammer.
All-purpose strong tool with full body quenching type through angular shaft.1Đã tìm thấy sản phẩm
JPY: 1,929
USD: 12.09
-
Gỡ bỏ công cụ Nhỏ D-RM1
The tip is thin and can be used to remove clips from the lining of automobiles.
For removing the lining of an automobile or removing a clip, etc.1Đã tìm thấy sản phẩm
JPY: 664
USD: 4.16
-
Ba mảnh mỏng 200mm D-TSB-200
Suitable for tightening hard screws and heavy work.
This thickness of the center part and the slim part is hard to break even when working, relieves impact and transmits torque ideally. (PAT.) Long Type (200 mm) Torsion Type Bit.1Đã tìm thấy sản phẩm
JPY: 769
USD: 4.82
-
Viscocci bit tác động Loại tương ứng D-14
You can work without dropping stainless steel screws that don't have magnets. (PAT.)
Charging impact driver 14.4 V compatible 6.35 mm bit.1Đã tìm thấy sản phẩm
JPY: 743
USD: 4.66
-
Bis bắt Screwdriver thiết lập D-12SET
You can work by attaching screws in places where fingertips cannot reach or holding stainless steel screws that do not work with magnets.
This set can handle most Phillips screws.1Đã tìm thấy sản phẩm
JPY: 1,143
USD: 7.17
-
Công cụ Lưu động Lớn D-RM2
The tip is thin and can be used for removing the lining of a car.
For removing the lining of cars and removing clips.1Đã tìm thấy sản phẩm
JPY: 893
USD: 5.60
-
[Đã ngừng]Cờ lê quân đội 10 6 mảnh Set
3Đã tìm thấy sản phẩm
JPY: 2,500-
USD: 15.67-
-
[Đã ngừng]Bộ Vệ Sinh Khẩn Cấp (Cho 10 Lần)
3Đã tìm thấy sản phẩm
JPY: 2,043-
USD: 12.81-
-
[Đã ngừng]Bộ Vệ Sinh Khẩn Cấp Kháng Khuẩn Ag (30 Lần)
2Đã tìm thấy sản phẩm
JPY: 6,384-
USD: 40.02-

