69-8624-21 Multi-Coupler MALC Model (Socket) SUS Single Unit Flange Fixed MALC-8S-FLSUSFKM
Đặc trưng
- Simultaneously connect multiple pipes in one connection operation. Supports medium pressure applications.
- Compared to conventional "multi-couplers" (MAS and MAT types), the flow rate is approximately twice as large. It contributes to miniaturization of mounting plates. (* The rate of increase of the flow rate depends on the size.)
- Conventional "multi-couplers" allowed eccentricity up to φ0.6 mm, but the MALC type allowed eccentricity up to φ2 mm.
- Special valve shape allows pressurized connection up to 2 MPa.
- Since the dimension between plates when connecting is unified to 30 mm for all sizes, any size can be mounted on the same plate.
- Liquid dripping and air contamination are suppressed by adopting a dripping reduction valve structure.
Thông số kỹ thuật
- Socket
- MALC-8S-FL Model (Flange Fixed Type for Medium Pressure)
- Mass (g): 978
- Dimension (L1) (mm): (86)
- Dimension (L2) (mm): (53)
- Dimension (L3) (mm): 18
- Dimension (L4) (mm): 12
- Dimensions (□S) (mm): 79
- Maximum Working Pressure: 5.0 MPa{51kgf/cm2} (Single Unit/2.0 MPa{20kgf/cm2})
- Valve Structure: Double-Way Open/Close Type (Liquid Dripping Reduction Type)
- Applicable fluids: water, hydraulic fluid, air
- Body Material: Stainless Steel (Only Socket Body Surface Treatment/Electroless Nickel Phosphorus Plating)
- Withstand Pressure: 7.5 MPa{76kgf/cm2} (Single Unit/3.0 MPa{31kgf/cm2})
- Seal Material: Fluororubber (FKM)
- Operating temperature range *: -20 to +180°C
- *The available temperature range depends on the operating conditions.
- Recommended maximum tightening torque: 23 N · m{235kgf · cm}
- Compatibility: The socket and plug can be connected in the same size regardless of the mounting shape.
- Minimum cross-sectional area: 347 mm2
- Suitable for Vacuum Applications: Cannot be used for vacuum applications, either alone or connected.
- Amount of air mixed at the time of connection: 0.85 mL * Varies depending on operating conditions
- Amount of liquid dripping at the time of separation: 0.85 mL * Varies according to operating conditions
- Maximum connection holding force: 15600 N{1591kgf}
- Minimum Connection Holding Force Calculated *: P×1360+310 N{p×13.6+31kgf}
- *Substitute the actual pressure [P (MPa), p (kgf/cm2)]. Use a force greater than the required minimum connection holding force. Do not exceed the maximum connection holding force.
| Mã đặt hàng | 69-8624-21 | |
|---|---|---|
| Mã Model | MALC-8S-FLSUSFKM | |
| Mã JAN | 4992338475505 | |
| Giá chuẩn |
JPY: 61,800
USD: 387.39
Excange rate 1USD= 159.53JPY
Valid price in Japan |
|
| Số lượng | 1piece | |
| Hàng có sẵn ở Nhật Bản |
|
|
| Cổ phiếu của nhà cung cấp |
|
|
Biến thể sản phẩm (Kích cỡ khác nhau, Thông số kỹ thuật, Sản phẩm tùy chọn, v.v.)
| Ảnh sản phẩm | Mã đặt hàng | Tên | Mã Model | Số lượng | Giá chuẩn | Giá hợp lệ ở Nhật Bản | Hàng tồn kho [Cổ phiếu của nhà cung cấp] |
|
|---|---|---|---|---|---|---|---|---|
 |
69-8624-17 | Multi-Coupler MALC Model (Socket) SUS Single Unit Flange Fixed MALC-2S-FLSUSFKM | MALC-2S-FLSUSFKM | 1piece | JPY: 26,800 | USD: 167.99 |
|
|
 |
69-8624-18 | Multi-Coupler MALC Model (Socket) SUS Single Unit Flange Fixed MALC-3S-FLSUSFKM | MALC-3S-FLSUSFKM | 1piece | JPY: 32,000 | USD: 200.59 |
|
|
 |
69-8624-19 | Multi-Coupler MALC Model (Socket) SUS Single Unit Flange Fixed MALC-4S-FLSUSFKM | MALC-4S-FLSUSFKM | 1piece | JPY: 39,800 | USD: 249.48 |
|
|
 |
69-8624-20 | Multi-Coupler MALC Model (Socket) SUS Single Unit Flange Fixed MALC-6S-FLSUSFKM | MALC-6S-FLSUSFKM | 1piece | JPY: 49,200 | USD: 308.41 |
|
|
 |
69-8624-21 | Multi-Coupler MALC Model (Socket) SUS Single Unit Flange Fixed MALC-8S-FLSUSFKM | MALC-8S-FLSUSFKM | 1piece | JPY: 61,800 | USD: 387.39 |
|