Thông số kỹ thuật

• Plug
• MALC-1~12P Type (Screw Fixed Type for Medium Pressure)
• Mass (g): 724
• Dimension (L1) (mm): 57
• Dimension (L2) (mm): (45)
• Dimension (L3) (mm): 12
• Dimension (φD) (mm): 74
• Dimensions (H) (mm): Hex 67
• Dimensions (T) (mm): M62 x 2
• Maximum Working Pressure: 1.5 MPa{15kgf/cm2} (Single Unit/1.5 MPa{15kgf/cm2})
• Valve Structure: Double-Way Open/Close Type (Liquid Dripping Reduction Type)
• Applicable fluids: water, hydraulic fluid, air
• Body Material: Stainless Steel (Only Socket Body Surface Treatment/Electroless Nickel Phosphorus Plating)
• Withstand Pressure: 2.3 MPa{23kgf/cm2} (Single Unit/2.3 MPa{23kgf/cm2})
• Seal Material: Fluororubber (FKM)
• Operating temperature range *: -20 to +180°C
• *The available temperature range depends on the operating conditions.
• Recommended maximum tightening torque: 80 N · m{816kgf · cm}
• Compatibility: The socket and plug can be connected in the same size regardless of the mounting shape.
• Minimum cross-sectional area: 795 mm2
• Suitable for Vacuum Applications: Cannot be used for vacuum applications, either alone or connected.
• Amount of air mixed at the time of connection: 1.46 mL * Varies depending on operating conditions
• Amount of liquid dripping at the time of separation: 1.46 mL * Varies according to operating conditions
• Maximum connection holding force: 8200 N{837kgf}
• Minimum Connection Holding Force Calculated *: P×2260+400 N{p×22.6+40kgf}
• *Substitute the actual pressure [P (MPa), p (kgf/cm2)]. Use a force greater than the required minimum connection holding force. Do not exceed the maximum connection holding force.
•