Junkosha Inc.

67-2260-21 One Touch Joint W Series Nipple 8 mm PT1/4 WN-08-02

Đặc trưng

  • All resin parts are UL94V-0 equivalent products.
  • Resin parts are all UR (PT) screws. Resin press-fit parts have 30% more strength than conventional products.
  • New mechanism tube grip dramatically improves impact resistance.
  • The tube grip rotates smoothly within the fitting, preventing tube breakage due to tube rotation.
  • All sealing materials, such as O-rings and V-seals, use water-resistant NBR.
  • No need for seal tape.
  • The R (PT) screw part is sealed.
  • The body can be positioned according to the tube extraction direction.
  • The joint between the R (PT) screw part and the resin such as the elbow/tee rotates, and can be freely positioned in accordance with the direction in which the tube is taken out after fitting.
  • For Automotive Spot Welding Equipment For Piping for Air Pressure and Water Pressure
  • For Piping Requiring Impact Resistance
  • For Flame Retardant Piping

Thông số kỹ thuật

  • Applicable Tube Outer Diameter D (mm): 8
  • Hex Opposite Side (mm): 17
  • Connection Diameter: PT1/4
  • Operating Temperature Range (°C): Air: 0~60°C, Water: 0~60°C(Do not freeze.)
  • Fluids used: Air, Water
  • Fluids used: Air, Water
  • Fluid Temperature: 0~60°C (Air), 0~60°C (Water * Cannot be Frozen)
  • Maximum working pressure: 0.97 MPa (air), 0.29 MPa (water)
  • Working vacuum pressure: 1.4 kPa or more (when the working fluid is air)
  • Applicable Tube (when the fluid used is air): Nylon Tube (AS1, AS4), Tube for Spot Welding Equipment (SP4, SPF), Polyurethane Tube (UH, UF, UFL, UE, UC)
  • Applicable Tube (When Using Water): Nylon Tube (AS1), Tube for Spot Welding Equipment (SP4, SPF)
  • Material/Finish: Body (Metal Part)/Brass
  • Note:If the maximum operating pressure of the tube is lower than the above pressure, use the tube at the maximum operating pressure or less.
  • Note:When using a tube other than the applicable tube, please use a tube whose outer diameter accuracy is within ±0.1 mm of nylon and within ±0.15 mm of urethane, and whose roundness is within 0.2 mm of maximum outer diameter and minimum outer diameter.
  • Country of Origin: Japan
  • Securities Code: 383-8372
  •  

Kích thước gói:29×17×17 mm   [Về kích thước đóng gói]

Mã đặt hàng 67-2260-21
Mã Model WN-08-02
Giá chuẩn JPY: 193 USD: 1.20
Excange rate 1USD= 160.72JPY
Valid price in Japan
Số lượng 1piece
Hàng có sẵn ở Nhật Bản
Cổ phiếu của nhà cung cấp

Biến thể sản phẩm (Kích cỡ khác nhau, Thông số kỹ thuật, Sản phẩm tùy chọn, v.v.)

Ảnh sản phẩm Mã đặt hàng Tên Mã Model Số lượng Giá chuẩn Giá hợp lệ ở Nhật Bản Hàng tồn kho
[Cổ phiếu của nhà cung cấp]
67-2257-70 One Touch Joint W Series Nipple 12 mm PT1/2 WN-12-04 WN-12-04 1piece JPY: 330 USD: 2.05

67-2257-76 One Touch Joint W Series Nipple 10 mm PT1/2 WN-10-04 WN-10-04 1piece JPY: 283 USD: 1.76

67-2258-12 One Touch Joint W Series Nipple 12 mm PT1/8 WN-12-01 WN-12-01 1piece JPY: 355 USD: 2.21

67-2258-29 One Touch Joint W Series Nipple 12 mm PT3/8 WN-12-03 WN-12-03 1piece JPY: 298 USD: 1.85

67-2258-40 One Touch Joint W Series Nipple 12 mm PT1/4 WN-12-02 WN-12-02 1piece JPY: 298 USD: 1.85

67-2259-45 One Touch Joint W Series Nipple 8 mm PT3/8 WN-08-03 WN-08-03 1piece JPY: 210 USD: 1.31

67-2259-62 One Touch Joint W Series Nipple 6 mm PT3/8 WN-06-03 WN-06-03 1piece JPY: 203 USD: 1.26

67-2259-63 One Touch Joint W Series Nipple 10 mm PT3/8 WN-10-03 WN-10-03 1piece JPY: 233 USD: 1.45

67-2260-21 One Touch Joint W Series Nipple 8 mm PT1/4 WN-08-02 WN-08-02 1piece JPY: 193 USD: 1.20

67-2260-22 One Touch Joint W Series Nipple 10 mm PT1/8 WN-10-01 WN-10-01 1piece JPY: 236 USD: 1.47

67-2260-23 One Touch Joint W Series Nipple 10 mm PT1/4 WN-10-02 WN-10-02 1piece JPY: 225 USD: 1.40

67-2260-37 One Touch Joint W Series Nipple 8 mm PT1/8 WN-08-01 WN-08-01 1piece JPY: 185 USD: 1.15

67-2260-94 One Touch Joint W Series Nipple 6 mm PT1/4 WN-06-02 WN-06-02 1piece JPY: 166 USD: 1.03

67-2261-36 One Touch Joint W Series Nipple 6 mm PT1/8 WN-06-01 WN-06-01 1piece JPY: 156 USD: 0.97