65-4215-13 Screw Position Gauge Pin Gauge Length 10mm Nominal diameter M8 Pitch 1 SPSM8XP1.0GP210L
Đặc trưng
- The threaded area is compliant with the standard of the pass-side screw plug gauge, and the pass-through check of the screw hole can be performed simultaneously.
- The vertical angle can be confirmed by looking at the clearance between the end face of the pin gauge.
- Gauge steel (SKS3, HRC58 or higher) is used for the gauge material and has excellent wear resistance.
- Attached is a knurled handle that can be put on and taken off so that it does not touch the gauge with bare hands. (Remove and use if it interferes with the measurement.)
- To satisfy your trust and peace of mind, the inspection results of the screw gauge part and the pin gauge part are attached.
Thông số kỹ thuật
- Thread Nominal: M8
- Pitch: 1
- Gauge Type: GP
- Grade: Grade 2
- Handle length (mm): 10
| Mã đặt hàng | 65-4215-13 | |
|---|---|---|
| Mã Model | SPSM8XP1.0GP210L | |
| Giá chuẩn |
JPY: 6,610
USD: 41.46
Excange rate 1USD= 159.42JPY
Valid price in Japan |
|
| Số lượng | 1piece | |
| Hàng có sẵn ở Nhật Bản |
|
|
| Cổ phiếu của nhà cung cấp |
|
|
Biến thể sản phẩm (Kích cỡ khác nhau, Thông số kỹ thuật, Sản phẩm tùy chọn, v.v.)
| Ảnh sản phẩm | Mã đặt hàng | Tên | Mã Model | Số lượng | Giá chuẩn | Giá hợp lệ ở Nhật Bản | Hàng tồn kho [Cổ phiếu của nhà cung cấp] |
|
|---|---|---|---|---|---|---|---|---|
 |
65-4215-13 | Screw Position Gauge Pin Gauge Length 10mm Nominal diameter M8 Pitch 1 SPSM8XP1.0GP210L | SPSM8XP1.0GP210L | 1piece | JPY: 6,610 | USD: 41.46 |
|
|
 |
65-4215-14 | Screw Position Gauge Pin Gauge Length 22mm Nominal diameter M8 Pitch 1 SPSM8XP1.0GP222L | SPSM8XP1.0GP222L | 1piece | JPY: 6,610 | USD: 41.46 |
|
|
 |
65-4215-15 | Screw Position Gauge Pin Gauge Length 10mm Nominal diameter M8 Pitch 1.25 SPSM8XP1.25GP210L | SPSM8XP1.25GP210L | 1piece | JPY: 6,230 | USD: 39.08 |
|
|
 |
65-4215-16 | Screw Position Gauge Pin Gauge Length 22mm Nominal diameter M8 Pitch 1.25 SPSM8XP1.25GP222L | SPSM8XP1.25GP222L | 1piece | JPY: 6,490 | USD: 40.71 |
|
|
 |
65-4215-17 | Screw Position Gauge Pin Gauge Length 10mm Nominal diameter M8 Pitch 1 SPSM8XP1.0GP6H10L | SPSM8XP1.0GP6H10L | 1piece | JPY: 6,610 | USD: 41.46 |
|
|
 |
65-4215-18 | Screw Position Gauge Pin Gauge Length 22mm Nominal diameter M8 Pitch 1 SPSM8XP1.0GP6H22L | SPSM8XP1.0GP6H22L | 1piece | JPY: 6,610 | USD: 41.46 |
|
|
 |
65-4215-19 | Screw Position Gauge Pin Gauge Length 10mm Nominal diameter M8 Pitch 1.25 SPSM8XP1.25GP6H10L | SPSM8XP1.25GP6H10L | 1piece | JPY: 6,230 | USD: 39.08 |
|
|
 |
65-4215-20 | Screw Position Gauge Pin Gauge Length 22mm Nominal diameter M8 Pitch 1.25 SPSM8XP1.25GP6H22L | SPSM8XP1.25GP6H22L | 1piece | JPY: 6,490 | USD: 40.71 |
|