65-1981-28 UT Coat 2 Flutes Long Neck Square C-CER Outer Diameter 0.15 x Effective Length 0.75 x Blade Length 0.15 x Total Length 45 x Shank Diameter 4 C-CER20015-0.75
Đặc trưng
- Suitable for machining deep groove shapes by undercutting the neck.
- Compatible Work Materials: Carbon Steel, Alloy Steel, Pre-Hardened Steel, Copper, Quenched Steel (~55HRC), Cast Iron, Titanium Alloy, Super Heat Resistant Alloy.
- Shank taper angle is a guide.
- If it is necessary to interfere with the work, be sure to measure and confirm.
- Be careful of contact between the shank and the workpiece.
Thông số kỹ thuật
- Blade diameter (mm): 0.15
- Blade length (mm): 0.15
- Total length (mm): 45
- Shank diameter (mm): 4
- Number of blades: 2
- Helix angle (degrees): 30
- Surface treatment: UTCOAT
- Surface treatment: UT coating
- Material/Finish: Ultrafine Grain Alloy (Super MG)
- Mass: 10 g
- Country of origin: Japan
- Securities Code: 247 -5717
| Mã đặt hàng | 65-1981-28 | |
|---|---|---|
| Mã Model | C-CER20015-0.75 | |
| Mã JAN | 4560295116757 | |
| Giá chuẩn |
JPY: 10,238
USD: 64.18
Excange rate 1USD= 159.53JPY
Valid price in Japan |
|
| Số lượng | 1piece | |
| Hàng có sẵn ở Nhật Bản |
|
|
| Cổ phiếu của nhà cung cấp |
|
|
Biến thể sản phẩm (Kích cỡ khác nhau, Thông số kỹ thuật, Sản phẩm tùy chọn, v.v.)
| Ảnh sản phẩm | Mã đặt hàng | Tên | Mã Model | Số lượng | Giá chuẩn | Giá hợp lệ ở Nhật Bản | Hàng tồn kho [Cổ phiếu của nhà cung cấp] |
|
|---|---|---|---|---|---|---|---|---|
 |
65-1981-23 | UT Coat 2 Flutes Long Neck Square C-CER Outer Diameter 0.1 x Effective Length 0.3 x Blade Length 0.1 x Total Length 45 x Shank Diameter 4 C-CER2001-0.3 | C-CER2001-0.3 | 1piece | JPY: 9,068 | USD: 56.84 |
|
|
 |
65-1981-24 | UT Coat 2 Flutes Long Neck Square C-CER Outer Diameter 0.1 x Effective Length 0.5 x Blade Length 0.1 x Total Length 45 x Shank Diameter 4 C-CER2001-0.5 | C-CER2001-0.5 | 1piece | JPY: 9,945 | USD: 62.34 |
|
|
 |
65-1981-25 | UT Coat 2 Flutes Long Neck Square C-CER Outer Diameter 0.1 x Effective Length 0.75 x Blade Length 0.1 x Total Length 45 x Shank Diameter 4 C-CER2001-0.75 | C-CER2001-0.75 | 1piece | JPY: 11,018 | USD: 69.07 |
|
|
 |
65-1981-26 | UT Coat 2-Flute Long Neck Square C-CER Outer Diameter 0.1 x Effective Length 1 x Blade Length 0.1 x Total Length 45 x Shank Diameter 4 C-CER2001-1 | C-CER2001-1 | 1piece | JPY: 12,383 | USD: 77.62 |
|
|
 |
65-1981-27 | UT Coat 2 Flutes Long Neck Square C-CER Outer Diameter 0.15 x Effective Length 0.5 x Blade Length 0.15 x Total Length 45 x Shank Diameter 4 C-CER20015-0.5 | C-CER20015-0.5 | 1piece | JPY: 9,263 | USD: 58.06 |
|
|
 |
65-1981-28 | UT Coat 2 Flutes Long Neck Square C-CER Outer Diameter 0.15 x Effective Length 0.75 x Blade Length 0.15 x Total Length 45 x Shank Diameter 4 C-CER20015-0.75 | C-CER20015-0.75 | 1piece | JPY: 10,238 | USD: 64.18 |
|
|
 |
65-1981-29 | UT Coat 2-Flute Long Neck Square C-CER Outer Diameter 0.15 x Effective Length 1 x Blade Length 0.15 x Total Length 45 x Shank Diameter 4 C-CER20015-1 | C-CER20015-1 | 1piece | JPY: 10,238 | USD: 64.18 |
|
|
 |
65-1981-30 | UT Coat 2-Flute Long Neck Square C-CER Outer Diameter 0.2 x Effective Length 2 x Blade Length 0.3 x Total Length 45 x Shank Diameter 4 C-CER2002-2 | C-CER2002-2 | 1piece | JPY: 10,140 | USD: 63.56 |
|
|
 |
65-1981-31 | UT Coat 2-Flute Long Neck Square C-CER Outer Diameter 0.2 x Effective Length 3 x Blade Length 0.3 x Total Length 45 x Shank Diameter 4 C-CER2002-3 | C-CER2002-3 | 1piece | JPY: 10,433 | USD: 65.40 |
|
|
 |
65-1981-32 | UT Coat 2 Flutes Long Neck Square C-CER Outer Diameter 0.3 x Effective Length 1.5 x Blade Length 0.4 x Total Length 45 x Shank Diameter 4 C-CER2003-1.5 | C-CER2003-1.5 | 1piece | JPY: 6,143 | USD: 38.51 |
|