AS ONE AS ONE

Xử lý 3,000,000 sản phẩm
Cách sử dụng
Cách sử dụng
Liên hệ với chúng tôi
Kyoto Electronics Manufacturing Co., Ltd.

64-8927-13　Potentiometric Automatic Titrator　AT-710M

  • Lắp ráp dễ dàng

Đặc trưng

  • Information such as calibration results and replacement timing can be recorded on the electrode (Smart Electrode).
  • Reagent information can be recorded in the Burette unit (Smart Burette)
  • New Burette Unit Installed
  • Up to 4 devices can be measured simultaneously (simultaneous parallel titration)
  • Can also be connected to a coulometric/capacitive/hybrid Carl Fisher moisture meter.
  • The operation section and titration section can be separated by wireless (Bluetooth®).
  • Large touch panel color LCD (8.4 ”)
  • User group permission setting function
  • Simultaneously record two different detected potentials (pH and permeability, pH and conductivity, pH and temperature, etc.)
  • Monitor and safely measure temperature during titration
  • Titration results can be output to a USB flash drive in PDF format.

Thông số kỹ thuật

  • Main Unit + Printer + Touch Panel Controller
  • detection range
  • (1)Potential difference: -2000 mV to +2000 mV
  • (2)pH:-20.000~20.000pH
  • (3)Temperature: 0~100 deg. C
  • titration mode
  • automatic titration
  • Automatic intermittent titration Intermittent and continuous constant rate titration stat
  • Number of methods: 20
  • Type of titration: potentiometric titration (Neutralization titration, redox titration, and precipitation titration), photometric titration, polarization titration, conductivity titration
  • Titration mode: End point automatic stop method/Set potential stop method/Full amount
  • Special applications: measurement of electrode potential (pH, potential), acid dissociation constant (pKa)
  • Display: LCD with white LED backlight
  • Calculation function: Equipped with concentration calculation, statistical calculation processing (Mean, standard deviation, and relative standard deviation) blank and factor automatic input function
  • Data storage: 50 samples
  • GLP Support Functions
  • Registration of person in charge, record of inspection result, record of electrode calibration history,
  • Burette capacity test function, energization time management
  • Burette Capacity
  • 20 mL Glass Burette (Standard)
  • Optional 10 mL and 5 mL burette units available
  • 50 mL, APB-610 option available for 1 mL
  • Burette accuracy
  • 20mL
  • Burette ±0.02 mL
  • Reproducibility ±0.01 mL
  • 10mL
  • Burette ±0.015 mL
  • Reproducibility ±0.005 mL
  • 5mL
  • Burette ±0.01 mL
  • Reproducibility ±0.003 mL
  • preamplifier
  • 1)Standard pH (mV) and mV two-input amplifier (standard)
  • 2)Additional amplifiers with PTA light intensity input
  • 3)Additional amplifiers with POT polarization input
  • 4)Additional amplifier with input of CMT conductivity compatible with factory integration
  • 5)Additional amplifier with input of TET pH (mV) factory built-in
  • external input/output
  • RS-232C x 2 Printer, Balance, Data Collection Software (SOFT CAP)
  • USB x 1USB memory, printer, keyboard, bar code reader, foot switch, USB hub, for Android terminal
  • SS-BUS x 1 Multi-Specimen Changer for APB
  • ELE1 for Smart Electrodes
  • Temperature sensor input terminal for reagent capacity correction and sensor
  • Pt100, Temperature Readout Accuracy: ±0.5°C (Burette 1 Only)
  • Scalability
  • Electric Burets: Up to 10 Control Burets (Including 2 Built-in Bodies)
  • Multi-Specimen Changer: CHA-700
  • usage environment
  • Ambient temperature: 5~35°C
  • Relative humidity: 85%RH or less (non-condensing)
  • Power
  • 24 VDC 1.9 A (Body) AC100 240 VAC 10 50 Hz/60 Hz (AC Adapter)
  • 7 VDC 1.6 A (Printer) 100 VAC 10 50 Hz/60 Hz (AC Adapter)
  • Power Consumption
  • Body: Approx. 20 W
  • Printer: Approx. 7W
  • External Dimensions
  • Titration Unit: Width 141 mm x Depth 296 mm x Height 367 mm (Excluding Piping)
  • Stirrer Part (MS 710A): Width 107 x Depth 206 x Height 331 mm
  • Printer: Width 106 x Depth 180 x Height 88 mm
  • Mass
  • Titration unit: Approx. 4 kg
  • Stirrer Part (MS 710A): Approx. 2 kg
  • Printer: Approx. 0.4 kg
  • conformance planning
  • CE Marking Complies with EMC EN61326 1LVD EN61010 1RE Directive
  • Burette unit EBU FCC Part15 SubpartC FCC ID 2ABSVEBU03 Weak radio station
  • *The attached manual is a CD. If written instructions are required, an additional fee will be charged.
  •  

Kích thước gói：440×550×500 mm　　 [Về kích thước đóng gói]

Mã đặt hàng 64-8927-13
Mã Model AT-710M
Giá chuẩn JPY: 1,299,000 USD: 8,142.67
Excange rate 1USD= 159.53JPY
Valid price in Japan
Số lượng 1set
Hàng có sẵn ở Nhật Bản
Cổ phiếu của nhà cung cấp

Biến thể sản phẩm (Kích cỡ khác nhau, Thông số kỹ thuật, Sản phẩm tùy chọn, v.v.)

Ảnh sản phẩm Mã đặt hàng Tên Mã Model Số lượng Giá chuẩn Giá hợp lệ ở Nhật Bản Hàng tồn kho
[Cổ phiếu của nhà cung cấp]
64-8927-11 Potentiometric Automatic Titrator　AT-710B AT-710B
  • Lắp ráp dễ dàng
 1set JPY: 901,000 USD: 5,647.84

64-8927-12 Potentiometric Automatic Titrator　AT-710S AT-710S
  • Lắp ráp dễ dàng
 1set JPY: 1,125,000 USD: 7,051.97

64-8927-13 Potentiometric Automatic Titrator　AT-710M AT-710M
  • Lắp ráp dễ dàng
 1set JPY: 1,299,000 USD: 8,142.67

Ca-ta-lô sản phẩm

Tên Ca-ta-lô Trang
AS ONE Catalog 2025 [Instruments for Laboratory] 574

Trang này là trang sản phẩm Potentiometric Automatic Titrator được bán bởi tập đoàn AS ONE. AXEL GLOBAL là một trang web với hơn 3,0 triệu sản phẩm được sử dụng trong nhiều lĩnh vực, bao gồm Nghiên cứu và phát triển, sản xuất, chất bán dẫn, y tế, điều dưỡng và vệ sinh thực phẩm.