64-8560-39 4 Flute Tapered Neck Radius End Mill, Outer Diameter 1.5 x Corner Radius R 0.3 x Blade Length 1.5 x Neck Length 10 HTNRS4015-031008
Đặc trưng
- 4-Flute Taper Neck Radius End Mill for Processing High-Hardness Materials.
- Cutting resistance is reduced by the corner R shape that smoothly connects from the tip to the outer periphery, and vibration is suppressed by the unequal division shape.
- Even in deep carving, stable machining and high quality machining surfaces are achieved.
- Uses HARDMAX coat for long life in processing of high hardness materials.
- Compatible with all coolant.
- Shank taper angle is a guide.
- If it is necessary to interfere with the work, be sure to measure and confirm.
- Be careful of contact between the shank and the workpiece.
Thông số kỹ thuật
- Corner radius (mm): R 0.3
- Blade diameter (mm): 1.5
- Number of blades: 4
- Blade length (mm): 1.5
- Total length (mm): 50
- Shank diameter (mm): 4
- Helix angle: 45 degrees
- Surface treatment: HARD MAX
- Compatible Work Material: Pre-hardened Steel, Quenched Steel (55 HRC) (60 HRC) (65 HRC), Cast Iron
- Material/Finish: Super MG
- Country of origin: Japan
- Securities Code: 195 -1218
| Mã đặt hàng | 64-8560-39 | |
|---|---|---|
| Mã Model | HTNRS4015-031008 | |
| Mã JAN | 4560295109148 | |
| Giá chuẩn |
JPY: 8,125
USD: 50.93
Excange rate 1USD= 159.53JPY
Valid price in Japan |
|
| Số lượng | 1piece | |
| Hàng có sẵn ở Nhật Bản |
|
|
| Cổ phiếu của nhà cung cấp |
|
|
Biến thể sản phẩm (Kích cỡ khác nhau, Thông số kỹ thuật, Sản phẩm tùy chọn, v.v.)
| Ảnh sản phẩm | Mã đặt hàng | Tên | Mã Model | Số lượng | Giá chuẩn | Giá hợp lệ ở Nhật Bản | Hàng tồn kho [Cổ phiếu của nhà cung cấp] |
|
|---|---|---|---|---|---|---|---|---|
 |
64-8560-34 | 4-Flute Tapered Neck Radius End Mill, Outer Diameter 1 x Corner Radius R 0.2 x Blade Length 1 x Neck Length 6 HTNRS4010-020608 | HTNRS4010-020608 | 1piece | JPY: 8,125 | USD: 50.93 |
|
|
 |
64-8560-35 | 4-Flute Tapered Neck Radius End Mill, Outer Diameter 1 x Corner Radius R 0.2 x Blade Length 1 x Neck Length 10 HTNRS4010-021008 | HTNRS4010-021008 | 1piece | JPY: 8,125 | USD: 50.93 |
|
|
 |
64-8560-36 | 4-Flute Tapered Neck Radius End Mill, Outer Diameter 1 x Corner Radius R 0.2 x Blade Length 1 x Neck Length 20 HTNRS4010-022008 | HTNRS4010-022008 | 1piece | JPY: 8,125 | USD: 50.93 |
|
|
 |
64-8560-37 | 4-Flute Tapered Neck Radius End Mill, Outer Diameter 1 x Corner Radius R 0.2 x Blade Length 1 x Neck Length 30 HTNRS4010-023008 | HTNRS4010-023008 | 1piece | JPY: 9,750 | USD: 61.12 |
|
|
 |
64-8560-38 | 4 Flute Tapered Neck Radius End Mill, Outer Diameter 1.5 x Corner Radius R 0.3 x Blade Length 1.5 x Neck Length 6 HTNRS4015-030608 | HTNRS4015-030608 | 1piece | JPY: 8,125 | USD: 50.93 |
|
|
 |
64-8560-39 | 4 Flute Tapered Neck Radius End Mill, Outer Diameter 1.5 x Corner Radius R 0.3 x Blade Length 1.5 x Neck Length 10 HTNRS4015-031008 | HTNRS4015-031008 | 1piece | JPY: 8,125 | USD: 50.93 |
|
|
 |
64-8560-40 | 4 Flute Tapered Neck Radius End Mill, Outer Diameter 1.5 x Corner Radius R 0.3 x Blade Length 1.5 x Neck Length 20 HTNRS4015-032008 | HTNRS4015-032008 | 1piece | JPY: 8,125 | USD: 50.93 |
|
|
 |
64-8560-41 | 4 Flute Tapered Neck Radius End Mill, Outer Diameter 1.5 x Corner Radius R 0.3 x Blade Length 1.5 x Neck Length 30 HTNRS4015-033008 | HTNRS4015-033008 | 1piece | JPY: 9,750 | USD: 61.12 |
|