60-9239-52 Coromill Pruler Carbide End Mill for Heavy Cutting Milling (730) 2P342-0200-PA
Đặc trưng
- Suitable for shoulder milling to full grooving. With full groove processing, a maximum of 2XD cut is possible.
- Optimized flute shape for good chip processing.
- Unequal pitch that does not sway even with full groove processing.
- Wrapping processing is also possible.
- The edge line has been strengthened to achieve long life even in severe machining.
- For steel and cast iron.
- For Dry Processing (Wet Processing Also Possible)
Thông số kỹ thuật
- Number of Blades ZEFP (Sheets): 4
- Cutting diameter DC (mm): 2
- Maximum Cut APMX (mm): 5
- Functional Length LF (mm): 57
- Length Under Neck LH (mm): 10.5
- Shank Diameter DCON (mm): 6
- Helix Angle FHA (°): 38
- Coating: PVD
- Link Diameter (mm): 6
- Helix Angle (°): 38
- Blade Diameter (mm): 2
- Number of Flutes: 4
- Flute Length (mm): 5
- Total length (mm): 57
- Surface Treatment: PVD
- Length Under Neck (mm): 10.5
- Blade Taper Half Angle: 30
- shanks: cylindrical shanks
- center cut
- Country of Origin: Italy
- Securities Code: 581-2570
Kích thước gói：77×25×25 mm 30 g [Về kích thước đóng gói]
| Mã đặt hàng | 60-9239-52 | |
|---|---|---|
| Mã Model | 2P342-0200-PA | |
| Giá chuẩn |
JPY: 13,500
USD: 84.68
Excange rate 1USD= 159.42JPY
Valid price in Japan |
|
| Số lượng | 1piece | |
| Hàng có sẵn ở Nhật Bản |
|
|
| Cổ phiếu của nhà cung cấp |
|
|
Biến thể sản phẩm (Kích cỡ khác nhau, Thông số kỹ thuật, Sản phẩm tùy chọn, v.v.)
| Ảnh sản phẩm | Mã đặt hàng | Tên | Mã Model | Số lượng | Giá chuẩn | Giá hợp lệ ở Nhật Bản | Hàng tồn kho [Cổ phiếu của nhà cung cấp] |
|
|---|---|---|---|---|---|---|---|---|
 |
60-9239-52 | Coromill Pruler Carbide End Mill for Heavy Cutting Milling (730) 2P342-0200-PA | 2P342-0200-PA | 1piece | JPY: 13,500 | USD: 84.68 |
|
|
 |
60-9239-53 | Coromill Pruler Carbide End Mill for Heavy Cutting Milling (730) 2P342-0300-PA | 2P342-0300-PA | 1piece | JPY: 15,000 | USD: 94.09 |
|
|
 |
60-9239-54 | Coromill Pruler Carbide End Mill for Heavy Cutting Milling (730) 2P342-0400-PA | 2P342-0400-PA | 1piece | JPY: 15,000 | USD: 94.09 |
|
|
 |
60-9239-55 | Coromill Pruler Carbide End Mill for Heavy Cutting Milling (730) 2P342-0500-PA | 2P342-0500-PA | 1piece | JPY: 15,000 | USD: 94.09 |
|
|
 |
60-9239-56 | Coromill Pruler Carbide End Mill for Heavy Cutting Milling (730) 2P342-0600-PB | 2P342-0600-PB | 1piece | JPY: 15,400 | USD: 96.60 |
|
|
 |
60-9239-57 | Coromill Pruler Carbide End Mill for Heavy Cutting Milling (730) 2P342-0800-PB | 2P342-0800-PB | 1piece | JPY: 21,600 | USD: 135.49 |
|
|
 |
60-9239-58 | Coromill Pruler Carbide End Mill for Heavy Cutting Milling (730) 2P342-1000-PB | 2P342-1000-PB | 1piece | JPY: 27,200 | USD: 170.62 |
|
|
 |
60-9239-59 | Coromill Pruler Carbide End Mill for Heavy Cutting Milling (730) 2P342-1200-PB | 2P342-1200-PB | 1piece | JPY: 36,600 | USD: 229.58 |
|