VESSEL CO., INC.

60-3193-39　Diamond Solid Stepped Bit +2 x 100 mm 6.35 mm 40 V Compatible　DG162100

Đặc trưng

Diamond particle coated impact driver bit for tightening stainless steel screws and drill screws.
Thin tip makes it easy to see the screw head and driving points, and the torsion on the neck part absorbs excessive impact.
Since there is no magnet, chips discharged when tightening drill screws are hard to adhere.
Electroless nickel plating is applied to prevent rust, and the tip coated with diamond particles is further coated with electrolytic nickel to prevent particles from falling off due to impact.
Uses die-hard steel (maximum hardness HRC62), a new material for bits with both hardness and stickiness.

Body: Die Hard Steel, Diamond Particles
Silver/Red
Use: For tightening stainless steel and drill screws
Total Length: 100 mm
Link Diameter: 6.35 mm
Material: Die Hard Steel (Hardness: HRC62) Surface Treatment: Electrolytic Nickel Plating (Diamond Particles Included)
Bit: (+) 2 Long Type
Specifications: No Magnet
Specifications: 40 V, 18 V

Kích thước gói：100×7×7 mm　20 g　 [Về kích thước đóng gói]

Mã đặt hàng	60-3193-39
Mã Model	DG162100
Mã JAN	4907587036629
Giá chuẩn	JPY: 630 USD: 3.95 Excange rate 1USD= 159.42JPY Valid price in Japan
Số lượng	1piece
Hàng có sẵn ở Nhật Bản
Cổ phiếu của nhà cung cấp

Mã đặt hàng	Tên	Mã Model	Số lượng	Giá chuẩn	Giá hợp lệ ở Nhật Bản
60-3193-37	Diamond Solid Stepped Bit +2 x 65 mm 6.35 mm 40 V Compatible　DG162065	DG162065	1piece	JPY: 540	USD: 3.39
60-3193-38	Diamond Solid Stepped Bit +2 x 82 mm 6.35 mm 40 V Compatible　DG162082	DG162082	1piece	JPY: 590	USD: 3.70
60-3193-39	Diamond Solid Stepped Bit +2 x 100 mm 6.35 mm 40 V Compatible　DG162100	DG162100	1piece	JPY: 630	USD: 3.95
60-3193-40	Diamond Solid Stepped Bit +2 x 150 mm 6.35 mm 40 V Compatible　DG162150	DG162150	1piece	JPY: 740	USD: 4.64