TRUSCO NAKAYAMA CORPORATION

Lembar logam dapat mengatasi tekanan tinggi, Correlation tipe 18L

TRUSCO NAKAYAMA CORPORATION

Emulsi lembar logam tipe 18L

TRUSCO NAKAYAMA CORPORATION

Lembar logam kimia jenis 18L

Sumico Lubricant Co., Ltd.

Koolant (tempel sendok) Power Tap tempel Super 1kg　STP-10

Ideal for hard-to-cut machining of stainless steel, etc.
It is a paste cutting agent.

Nihon Kohsakuyu Co., Ltd.

Mengetuk pasta C-101 (logam umum) 1kg

Nihon Kohsakuyu Co., Ltd.

Mengetuk pasta C-100 (chlorine Type) 1kg

Nihon Kohsakuyu Co., Ltd.

Tempel tempel C-101C (aset tembaga) 1kg　C-101C-1

Improves finish and work efficiency and extends tool life.
You can brush and brush.

R-GOT

Stencolorin Hijau 1L　R-4

In order to suppress heat generation during machining, an appropriate composition cutting edge can be obtained.
Difficult processing is easy, and it finishes beautifully.

FINE CHEMICAL JAPAN Co., Ltd.

Mengetuk kompleks 420ml　FC-181

Reduces high temperature during cutting and prevents scratching.
For all metal tapping, screwing and drill reaming.

FINE CHEMICAL JAPAN Co., Ltd.

Semprot Minyak V 420ml　FC-182-S

Light press, cutting and lubricating oil that disappears naturally.
No oil cleaning process is required after pressing or cutting.

TRUSCO NAKAYAMA CORPORATION

Α Semprotan Tapping sulit-untuk-mesin material untuk 420ml

TRUSCO NAKAYAMA CORPORATION

Mori Tapping Memotong 420ml　MTS-420SP

This is a high-performance cutting spray that contains molybdenum disulfide, CI (chlorine) -based, P (phosphorus) -based extreme pressure additives, rust and corrosion inhibitors.
Reduces cutting resistance and prevents heat generation.

TRUSCO NAKAYAMA CORPORATION

Α Tipe Gas Non-Gas yang sulit dipakai untuk material Ganti Plastik 350ml　ECO-TS-C

For difficult-to-cut machining of stainless steel, etc., and provides beautiful grinding.
Can be machined with light torque with no hard cutting and no mush.

TRUSCO NAKAYAMA CORPORATION

Mori Tapping Jenis Gas yang dihasilkan dari pemotongan harga Exchange Plastic 350ml　ECO-MTS-C

This is a high-performance cutting spray that contains molybdenum disulfide, CI (chlorine) -based, P (phosphorus) -based extreme pressure additives, rust and corrosion inhibitors.
Reduces cutting resistance and prevents heat generation.

TRUSCO NAKAYAMA CORPORATION

Mori Tapping Oil 1L

TRUSCO NAKAYAMA CORPORATION

Semprot Semprot Tapping Eco menit yang memuaskan 270ml　N2-TSE

This is an environmentally friendly biodegradable cutting agent that uses vegetable oils as its main ingredient and has low smoke and odor. (Does not contain chlorine, sulfur, or heavy metals) The injection gas uses nonflammable nitrogen gas, which is contained in about 75% of the atmosphere.
Tap die processing.

DAIZO CORPORATION

Tambahkan Moss A-02 Semprot Tapping 420ml　4006340

Because it is a grease type, it has less scattering and dripping than an oil type, better stopping on the cutting edge, and produces an excellent cutting effect by applying only a small amount. It is an economical product with little loss.
Prevents heat generation, improves finish accuracy, and greatly extends tool life. The cutting powder is discharged well.

Sumico Lubricant Co., Ltd.

Koolant (tambahan, Minyak) smykow Ultra lembar 300ml　SUC-3

Oil-like water-insoluble cutting agent containing extreme pressure agent. (Additives) Heavy cutting of stainless steel and hard alloys.
Drill, tap, and reamer.

Repco Co., Ltd.

Wegetable Cutting Oil skors tapi (baud 340ml)

RIDGID

threading Oil Endura-Clear 1 Gal (3.78 L)

ISHIHASHI SEIKO

ADALAH Minyak　18L-N

To extend cutting efficiency and tool life.
Minute particles of molybdenum disulfide cut to 1 micron are added. Although molybdenum disulfide is a waxy soft mineral, it does not melt up to 1800°C.

ISHIHASHI SEIKO

SS Oil Jet Spray A (420 ML)　JSA

Cutting oil containing molybdenum dioxide.
The wear of cutting tools is low, and the life is extended, and the cutting surface is also finished gracefully.

ISHIHASHI SEIKO

Jenis L Liter SS Oil 18　IS18L

The wear of the cutting tool is reduced, the life is extended, and the cutting surface is finished beautifully.
It's liquid.

ISHIHASHI SEIKO

ADALAH Minyak　POIL

Comes in a pack.
The wear of the cutting tool is reduced, the life is extended, and the cutting surface is finished beautifully.

R-GOT

Stencolorin Red Super gel 180g　R-5

For stainless steel.
It melts with heat, becomes liquid, and exhibits cutting force.

R-GOT

Gel Super Hijau Stencolorin 180g　R-6

For general steel.
It melts with heat, becomes liquid, and exhibits cutting force.

SUZUKI YUSHI INDUSTRIAL CO., LTD.

Super Tapping 4 l

TRUSCO NAKAYAMA CORPORATION

Mori Tapping Memotong Nozzle terbaru untuk dengan 350ml　ECO-MTS-S

This is a high-performance cutting spray that contains molybdenum disulfide, CI (chlorine) -based, P (phosphorus) -based extreme pressure additives, rust and corrosion inhibitors.
Reduces cutting resistance and prevents heat generation.

TRUSCO NAKAYAMA CORPORATION

Nozzle Khusus Semprot Non-Gas　ECO-NOZ

Nozzle dedicated to non-gas spray.
As a replacement nozzle for non-gas spray.

TRUSCO NAKAYAMA CORPORATION

Α Semprotan Tapping kesulitan-to-mesin Nozzle untuk dengan 350ml　ECO-TS-S

For difficult-to-cut machining of stainless steel, etc., and provides beautiful grinding.
Can be machined with light torque with no hard cutting and no mush.

Memotong Semprotan Minyak 420 mL　EA921SA-3

Can be used in a wide range of applications from general cutting to high-speed heavy cutting.
Excellent effect on materials such as carbon steel, alloy steel and stainless steel.

ASAHI ENGINEERING Co., Ltd.

Serangan Bio　BA-1000

The temperature and pH of the oil agent make it a comfortable breeding nest for germs, and if not managed, the oil agent will spoil and produce a foul odor.
After the active ingredients are dissolved, the workplace is improved to a hygienic and comfortable working environment.

TRUSCO NAKAYAMA CORPORATION

Hutan Potong Logam (Cairan Pemotongan Air)

TRUSCO NAKAYAMA CORPORATION

Hutan Potong Logam (Cairan Pemotongan Air)

ESCO Company Ltd.

Chain mendapati minyak [pemecah air] 1.0L　EA920AK-8

ESCO Company Ltd.

Chain melihat minyak 4.0 L　EA920AK-10A

ESCO Company Ltd.

Palu bor 100 mL　EA920AK-12

ESCO Company Ltd.

Memotong minyak 1,0 l　EA920AK-27

ESCO Company Ltd.

Semprotan merangkap 420mL　EA921S-5

Memotong Minyak, jenis non-klorin　 Z-217

Convenient Cutting Oil Essential for Metal Processing
This cutting oil is applied during metal cutting and tapping.