Membersihkan Agen
Filter
- menurut grup Produk
- menurut Produk
Urutkan berdasar:
-
Oil-Splitting Detergent Class One Sea (Neutral Type) 4L
2 produk ditemukan
JPY: 9,600-
USD: 59.73-
-
HOZAN TOOL INDUSTRIAL CO., LTD.
Petugas Pembersih Barang Z-294
Parts cleaner for a wide range of oily grease stains to water-soluble mud stains
1 produk ditemukan
JPY: 1,650
USD: 10.27
-
Cleaner Α, Membersihkan Persediaan 4L
2 produk ditemukan
JPY: 7,620-
USD: 47.41-
-
Super Bersih 420ml FC211-S
A versatile cleaning spray. It easily removes fats, oils, vegetable oils, metal powders and other stains on metal surfaces.
Cleaning of oil stains from industrial machinery, textile machinery, gravure printing machines to plastics.1 produk ditemukan
JPY: 960
USD: 5.97
-
Semprot untuk Nozzle Panjang 300mm
2 produk ditemukan
JPY: 280-
USD: 1.74-
-
NIC Membersihkan Agen Spray 480ml 4004340
Strongly clean oils and fats attached to the mold.
Quick-drying type allows you to perform the following tasks immediately after cleaning.1 produk ditemukan
JPY: 1,740
USD: 10.83
-
Semprot (Agen Pembersih Jamur) Pembersih Sumi, Perlengkapan Pembersih 420ml SMD-CL
This cleaning agent uses a non-chlorine solvent as the main agent to clean fats, oils, waxes and other dirt.
Cleaning the injection molding machine mold. (It is more effective if you clean it while wiping with a wet cloth.)1 produk ditemukan
JPY: 1,470
USD: 9.15
-
Pembersih Jamur, Membersihkan Persediaan FD 3 420ml FC-212
You can dissolve and easily remove the seizure products that adhere to the mold.
Can be easily cleaned in a short time without scratching the mold.1 produk ditemukan
JPY: 1,860
USD: 11.57
-
Gas NIC dan Semprotan Penghilangan 480ml 4004440
Powerfully dissolves and removes all kinds of resin gas and tar.
Since it has excellent melting and cleaning power, it suppresses unevenness on the surface of molded products.1 produk ditemukan
JPY: 3,330
USD: 20.72
-
Semprot (penghilangan gas) Agen Pembersih Sumi Mold DR 420ml SMD-DR
It is a gas film remover for resin molding dies and has excellent performance in dissolving chemically changed resin.
To remove gas dust and stubborn oil dirt stuck to an injection molding machine mold.1 produk ditemukan
JPY: 2,820
USD: 17.55
-
Bagian & Pembersih Rem S (550ml) 10468
Provides excellent cleaning power against oil, grease, and other dirt on brake linings and brake drums.
It does not contain chlorofluorocarbons or trichloroethane, which can destroy the ozone layer and cause environmental pollution.1 produk ditemukan
JPY: 610
USD: 3.80
-
Pembersih Bagian & Rem (840ml) 13400
Quick-dry type.
Can can be used upside down.1 produk ditemukan
JPY: 630
USD: 3.92
-
Cleaner, Membersihkan Perlengkapan 420ml NO1014
Clean up the carburetor interior to bring out the original engine performance.
Strongly cleans dirt adhering to metal parts.1 produk ditemukan
JPY: 900
USD: 5.60
-
Rektora Bersih 380ML NO1012
It strongly washes oil, grease, wax, pitch, etc.
Jet to remove dirt quickly.1 produk ditemukan
JPY: 743
USD: 4.62
-
Pendingin mesin 380ML NO1013
By removing carbon, varnish, gum, sludge, and other dirt deposited in the intake system and combustion chamber, the system can restore engine performance, improve acceleration performance, clean exhaust gases, and facilitate engine rotation.
You can also spray the can upside down.1 produk ditemukan
JPY: 1,050
USD: 6.53
-
Pembersih baja Stainless, Kebersihan Suplai 420ml TC-SC420
All you have to do is to melt the oil stains and stubborn stains by wrapping them with mousse bubbles and wipe them off.
Sash and metal parts are less prone to rust.1 produk ditemukan
JPY: 850
USD: 5.29
-
Cleaner, Membersihkan Persediaan W2 tipe 450 TCW2450
This water-based detergent contains a perfect balance of gentle surfactants and alkalinity.
It has an excellent effect on hand stains, cigarette stains and oil stains.1 produk ditemukan
JPY: 1,300
USD: 8.09
-
Oil Cleaner, Cleaning Perlengkapan Q1 tipe 550 OCQ1550
It has a powerful degreasing effect.
It does not fall under the Organic Solvent Poisoning Prevention Regulations.1 produk ditemukan
JPY: 1,450
USD: 9.02
-
Semprot (Agen Pembersihan Terdeflasi) Semprotan Bersih 420ml SMC
High pressure injection type strong degreasing cleaning spray using non-chlorine solvent as main agent.
Degreasing and cleaning of machine parts, etc.1 produk ditemukan
JPY: 1,310
USD: 8.15
-
-
Agen Pembersihan Akordeon 250ml
2 produk ditemukan
JPY: 1,430-
USD: 8.90-
-
Pembersih Peralatan Elektron, Pasokan Pembersihan panda 29 d 420ml non CFC TB29D
Removes stains related to electrical equipment without damaging plastic, rubber, metal, paint, etc.
It is not subject to the Organic Solvent Poisoning Prevention Regulations.1 produk ditemukan
JPY: 2,650
USD: 16.49
-
Pembersih Peralatan Elektron Bebas CFC, Pasokan Pembersihan 459ml L03116
Non-CFC cleaner.
It penetrates quickly without leaving any residue on the surface and evaporates rapidly.1 produk ditemukan
JPY: 8,430
USD: 52.45
-
Tipe solid antifoaming agen 200g KM601S-200
Solid antifoam.
It has excellent storage stability, and the defoaming component gradually elutes just by installing it in aqueous foaming solution, and the defoaming effect lasts for a long time.1 produk ditemukan
JPY: 3,523
USD: 21.92
-
Emulsi agen antifoaming 1 kg
2 produk ditemukan
JPY: 5,380-
USD: 33.47-
-
Emulsi agen antifoaming 18 kg
2 produk ditemukan
JPY: 101,874-
USD: 633.86-
-
YOKOHAMA OILS & FATS INDUSTRY Co., Ltd.
Asphalt 20L CB16
After spraying undiluted solution, you can simply wash it off.
It easily removes asphalt that is firmly attached.1 produk ditemukan
JPY: 21,580
USD: 134.27
-
YOKOHAMA OILS & FATS INDUSTRY Co., Ltd.
Bersihkan 20L/BIB CB20
Dissolves and removes thin concrete saws.
After applying the undiluted solution with a brush, after a while, wash it with a high-pressure washer and rub it with a metal brush scraper.1 produk ditemukan
JPY: 35,400
USD: 220.26
-
Awa Cleaner ACL-300
Dissolution agent exclusively for Newer foam (AW-500)
1 produk ditemukan
JPY: 1,910
USD: 11.88
-
Pembersih Taksi PRO353, Ketersediaan Pembersih Bahan 420ml 782836
A cleaning spray for carburetors only.
Removes sludge and other dirt accumulated inside the carburetor to facilitate the operation of the carburetor.1 produk ditemukan
JPY: 1,200
USD: 7.47
-
Semprot (Untuk Belt Dressing) 220mL EA920BB-8
Can also be used upside down.
1 produk ditemukan
JPY: 930
USD: 5.79
-
Pembersih FD, Perlengkapan Pembersih 480ML 515448
Quick-drying type degreasing cleaning spray that does not affect resin easily.
Cleaning the injection molding machine mold.1 produk ditemukan
JPY: 920
USD: 5.72
-
CORIUM 168 Electric Motor Cleaner, Membersihkan Persediaan C0168A
A spray type cleaner that can be applied easily.
Eco-friendly and low odor.1 produk ditemukan
JPY: 9,400
USD: 58.49
-
Minyak, minyak, lilin untuk Membersihkan Agen 18KG C-NE A777SW
It is a neutral type that does not contain intangible components and can be used without damaging the material of the cleaning product.
It is an environment-friendly type that does not fall under PRTR or medical drama.1 produk ditemukan
JPY: 31,969
USD: 198.91
-
Karburator pembersihan 420mL F211
It removes carbon, sludge and oil mist inside the carburetor with excellent cleaning power to facilitate operation.
Cleaning the carburetor.1 produk ditemukan
JPY: 530
USD: 3.30
-
Pembersih Karburator, Kebersihan Pasokan Mousse Tipe 420mL F212
Because it is a mousse type, it is ideal for stubborn stains that stick.
Cleaning the carburetor.1 produk ditemukan
JPY: 627
USD: 3.90
-
Sumimold DRZ 565036
It is a detergent that removes stubborn stains such as gas and dust generated by chemical changes of resin during resin molding and adhering to the mold.
This product does not contain any chemical substances that fall under the PRTR Law.1 produk ditemukan
JPY: 4,420
USD: 27.50
-
Emulsion-type defoaming agent 1kg KM-72
It is a fast-acting product compliant with the Food Sanitation Law.
1 produk ditemukan
JPY: 10,600
USD: 65.95
-
Emulsion-type defoaming agent 1kg
2 produk ditemukan
JPY: 3,520-
USD: 21.90-
-
Silicone defoaming agent 1kg KM-72F
It is a food sanitation law-compliant product with excellent durability.
1 produk ditemukan
JPY: 8,580
USD: 53.39
