Fukudaseiko

Sudut Cutter With Handle (45 Φ10 Blade length 3,0 × Neck diameter: 4)

Fukudaseiko

Angle Cutter With Handle (60 Φ10 Blade length 5,2 x Neck diameter: 4)

Fukudaseiko

T Slot Endmill (HSS, Φ15 Blade length 5 × Neck diameter: 6,0)

FUJIGEN KOGYO Co., Ltd.

Lengan Untuk NICECUT (Tipe Negatif S, 3 Bagian)　AMNS-03

The machining type can be changed by replacing the arm.
Face milling.

FUJIGEN KOGYO Co., Ltd.

Lengan Untuk NICECUT (Tipe Negatif S, 6 Potongan)　AMNS-06

The machining type can be changed by replacing the arm.
Face milling.

FUJIGEN KOGYO Co., Ltd.

Lengan Untuk NICECUT (Tipe T Negatif, 3 Bagian)　AMNT-03

The machining type can be changed by replacing the arm.
Face milling.

FUJIGEN KOGYO Co., Ltd.

Lengan Untuk NICECUT (Tipe T Negatif, 6 Potongan)　AMNT-06

The machining type can be changed by replacing the arm.
Face milling.

FUJIGEN KOGYO Co., Ltd.

Aero Mill (Shank Φ12, Memesan Diameter (a.Negative Type)　ARN12-30S

The use of a small diameter shank makes it suitable for use in low-stiffness machines.
By using different negative and positive types of machining work, it is possible to machine under more optimal conditions.

FUJIGEN KOGYO Co., Ltd.

Aero Mill (Shank Φ16, Memesan Diameter (a.Negative Type)　ARN16-40S

The use of a small diameter shank makes it suitable for use in low-stiffness machines.
By using different negative and positive types of machining work, it is possible to machine under more optimal conditions.

FUJIGEN KOGYO Co., Ltd.

Aero Mill (Shank Φ12, Machining Diameter (Jenewa), Tipe Positif)　ARP12-30S

The use of a small diameter shank makes it suitable for use in low-stiffness machines.
By using different negative and positive types of machining work, it is possible to machine under more optimal conditions.

FUJIGEN KOGYO Co., Ltd.

Aero Mill (Shank Φ16, Machining Diameter (Jenewa), Tipe Positif)　ARP16-40S

The use of a small diameter shank makes it suitable for use in low-stiffness machines.
By using different negative and positive types of machining work, it is possible to machine under more optimal conditions.

FUJIGEN KOGYO Co., Ltd.

Kunci Hitam (T-20)　BT-20

Used to attach the clamp screw to the cutter.

FUJIGEN KOGYO Co., Ltd.

Kumpulan Suku Clem　CL-1S

Used to attach the chip to the cutter.

FUJIGEN KOGYO Co., Ltd.

Cap Bolt Untuk NICECUT　CP6-15

Used to attach the arm to the cutter.

FUJIGEN KOGYO Co., Ltd.

Milling Cutter (8R ke 10 R)　DC32-40ALR

By replacing the chip, corner R shoulder machining from corner R5 to R10 is easy.
The long shank type uses a different material for the cutter body to increase its rigidity.

FUJIGEN KOGYO Co., Ltd.

Milling Cutter (8R ke 10 R, Tipe Panjang)　DC32-40ALRL

By replacing the chip, corner R shoulder machining from corner R5 to R10 is easy.
The long shank type uses a different material for the cutter body to increase its rigidity.

FUJIGEN KOGYO Co., Ltd.

Milling Cutter (5R ke 7R)　DC32-40ASR

By replacing the chip, corner R shoulder machining from corner R5 to R10 is easy.
The long shank type uses a different material for the cutter body to increase its rigidity.

FUJIGEN KOGYO Co., Ltd.

Milling Cutter (5R ke 7R, Tipe Panjang)　DC32-40ASRL

By replacing the chip, corner R shoulder machining from corner R5 to R10 is easy.
The long shank type uses a different material for the cutter body to increase its rigidity.

FUJIGEN KOGYO Co., Ltd.

Kunci Inggris (Heksagon 3mm)　K3

Used to attach the chip to the cutter.

FUJIGEN KOGYO Co., Ltd.

Kunci Inggris (Heksagon 5mm)　K-5

Used to attach the chip to the cutter.

FUJIGEN KOGYO Co., Ltd.

Kunci Hitam (T-9)　MA-1

Used to attach the chip to the cutter.

FUJIGEN KOGYO Co., Ltd.

Kunci Hitam (T-15)　N-6

Used to attach the chip to the cutter.

FUJIGEN KOGYO Co., Ltd.

Milling Cutter (SYURIRIN, 2 Blades, Shank Φ16, Machining diameter　NC2-1620

High feed and high-speed cutting with multiple blades is possible.
Excellent in shoulder grinding and grooving.

FUJIGEN KOGYO Co., Ltd.

Milling Cutter (SYURIRIN, 3 Blades, Shank Φ25, Machining diameter　NC3-2530

High feed and high-speed cutting with multiple blades is possible.
Excellent in shoulder grinding and grooving.

FUJIGEN KOGYO Co., Ltd.

Milling Cutter (SYURIRIN, 4 Blades, Shank Φ32, Machining diameter (acuan)　NC4-3240

High feed and high-speed cutting with multiple blades is possible.
Excellent in shoulder grinding and grooving.

FUJIGEN KOGYO Co., Ltd.

Milling Cutter (SYURIRIN, 5 Blades, Shank Φ32, Machining diameter　NC5-3250

High feed and high-speed cutting with multiple blades is possible.
Excellent in shoulder grinding and grooving.

FUJIGEN KOGYO Co., Ltd.

Milling Cutter (SUKATCUT, Shank Φ32, Machining Diameter (Jenewa)　NK9040T

Uses a unique mechanism to achieve right-angle accuracy after machining.
Due to the negative tip, 6 corners can be used on both sides.

FUJIGEN KOGYO Co., Ltd.

Milling Cutter (SUKATCUT, Shank Φ20, Machining Diameter (Jenewa)　NK9040T-20

Uses a unique mechanism to achieve right-angle accuracy after machining.
Due to the negative tip, 6 corners can be used on both sides.

FUJIGEN KOGYO Co., Ltd.

Milling Cutter (SUKATCUT, Shank Φ32, Machining Diameter (Jenewa)　NK9050T

Uses a unique mechanism to achieve right-angle accuracy after machining.
Due to the negative tip, 6 corners can be used on both sides.

FUJIGEN KOGYO Co., Ltd.

Milling Cutter (SUKATCUT, Shank Φ20, Machining Diameter (Jenewa)　NK9050T-20

Uses a unique mechanism to achieve right-angle accuracy after machining.
Due to the negative tip, 6 corners can be used on both sides.

FUJIGEN KOGYO Co., Ltd.

Milling Cutter (SUKATCUT, Shank Φ32, Machining Diameter (Jenewa)　NK9060T

Uses a unique mechanism to achieve right-angle accuracy after machining.
Due to the negative tip, 6 corners can be used on both sides.

FUJIGEN KOGYO Co., Ltd.

Milling Cutter (SUKATCUT, Shank Φ32, Machining Diameter (Jenewa)　NK9070T

Uses a unique mechanism to achieve right-angle accuracy after machining.
Due to the negative tip, 6 corners can be used on both sides.

FUJIGEN KOGYO Co., Ltd.

Milling Cutter (SUKATCUT, Shank Φ32, Machining Diameter (Jenewa)　NK9080T

Uses a unique mechanism to achieve right-angle accuracy after machining.
Due to the negative tip, 6 corners can be used on both sides.

FUJIGEN KOGYO Co., Ltd.

Milling Cutter (NICECUT, 3 Blades, Φ100, S Type)　NKN32-100S-03

The machining diameter can be changed by replacing the base, and the machining type can be changed by replacing the arm.
Face milling.

FUJIGEN KOGYO Co., Ltd.

Milling Cutter (NICECUT, 3 Blades, Φ110, Tipe T)　NKN32-110T-03

The machining diameter can be changed by replacing the base, and the machining type can be changed by replacing the arm.
Face milling.

FUJIGEN KOGYO Co., Ltd.

Milling Cutter (NICECUT, 3 Blades, Φ130, S Type)　NKN32-130S-03

The machining diameter can be changed by replacing the base, and the machining type can be changed by replacing the arm.
Face milling.

FUJIGEN KOGYO Co., Ltd.

Milling Cutter (NICECUT, 3 Blades, Φ140, Tipe T)　NKN32-140T-03

The machining diameter can be changed by replacing the base, and the machining type can be changed by replacing the arm.
Face milling.

FUJIGEN KOGYO Co., Ltd.

Milling Cutter (SUMIKKO, Shank Φ25, Machining Diameter (2,5 R sampai 5R)　SK25-30ALR

Nose R is R0.5 to R5.
The outer blade has a back taper and can be used mainly in the corner R and bottom R.

FUJIGEN KOGYO Co., Ltd.

Milling Cutter (SUMIKKO, Shank Φ25, Machining Diameter (2.5 R sampai 5R, Long Type)　SK25-30ALRL

Nose R is R0.5 to R5.
The outer blade has a back taper and can be used mainly in the corner R and bottom R.

FUJIGEN KOGYO Co., Ltd.

Milling Cutter (SUMIKKO, Shank Φ25, Machining Diameter (2,5 R atau kurang)　SK25-30ASR

Nose R is R0.5 to R5.
The outer blade has a back taper and can be used mainly in the corner R and bottom R.