FUJIGEN KOGYO Co., Ltd.

Diameter Tibirsko Blade: Sudut Φ1.2-Φ9.7: Diameter 90 Shank: 10

FUJIGEN KOGYO Co., Ltd.

Diameter Pedang Eco tidak asli: Sudut Φ1.2-Φ13.6: Diameter 90 Shank: 12

FUJIGEN KOGYO Co., Ltd.

Diameter pedang Eco Men: Sudut Φ1.2-Φ21.6: Diameter 90 Shank: 20

FUJIGEN KOGYO Co., Ltd.

Sudut ujung Chwimmi: Panjang 90: Diameter 105 Shank: 10

FUJIGEN KOGYO Co., Ltd.

Sudut Tip Pria Tidak Berlambung: Panjang 90: Diameter 110 Shank: 16

FUJIGEN KOGYO Co., Ltd.

Sudut jeruk besar: Panjang 90: Diameter 130 Shank: 20

FUJIGEN KOGYO Co., Ltd.

Tibirsko 2 Diameter shank: 16 Diameter chamfer maksimum: Φ18.0

FUJIGEN KOGYO Co., Ltd.

Diameter shank Eco 2 yang tidak Hulus: Diameter ruang Maksimum 20: Φ24.7

FUJIGEN KOGYO Co., Ltd.

Eco Men 2 Shank Diameter: 32 Diameter chamfer maksimum: Φ36.3

FUJIGEN KOGYO Co., Ltd.

Set Buytender (badan, Lengan)

FUJIGEN KOGYO Co., Ltd.

Sudut tip pemuda: Diameter 30 Shank: 32

FUJIGEN KOGYO Co., Ltd.

Mesin Pengeboran untuk sudut Ruby pemindahan chamfer: Diameter 45 Shank: 10

FUJIGEN KOGYO Co., Ltd.

Sudut ujung Marchangelmir: Diameter 0 sampai 90 Shank: 32

FUJIGEN KOGYO Co., Ltd.

R Special Jr. shank Φ25　NK25-05R

Chip replaceable and R chamfering up to 0.5~5R is possible.
Carbide chips that can be used on 4 sides with 1 chip, and the life is more than 5 times longer than Hiss.

FUJIGEN KOGYO Co., Ltd.

Ryan Men menandai sudut tip R: Diameter 45 Shank: 16

FUJIGEN KOGYO Co., Ltd.

Sudut tip Mini R: Diameter 45 Shank: 20　MR20-16S

R chamfer and C chamfer can be performed by replacing the chip.
It uses a chip that can be used for 8 corners.

FUJIGEN KOGYO Co., Ltd.

Tipe tabel dari sudut Nice dengan mesin Chamfering　F3

High-speed cutting with 8000 revolutions has been realized.
It is easy to adjust the chamfer amount with the chamfer amount notation that can be seen at a glance.

FUJIGEN KOGYO Co., Ltd.

Panjang Layar Klampu: 4,8 mm M2,5 kanan

FUJIGEN KOGYO Co., Ltd.

Kunci Panjang pin 20mm M6 Kanan

FUJIGEN KOGYO Co., Ltd.

Panjang Spanyol 90 mm　NL-4

Used to attach clamp screws and lock pins to chamfer cutter tips.

FUJIGEN KOGYO Co., Ltd.

Wajah untuk Memproses Intan Tip kelas Presisi S　S32GURDIA

Face milling, chamfering.

FUJIGEN KOGYO Co., Ltd.

Huntianman　HAM4-150CP3003

Lightweight, handy type, chamferable from thread surface to C4.
Lightweight.

FUJIGEN KOGYO Co., Ltd.

Mesin Pengeboran untuk Statener 30 Φ29

FUJIGEN KOGYO Co., Ltd.

Chamfer Cutter 45 Φ32　NK4530T

The problem of secondary scratching in various work materials was also cleared.
You can select an angle and chamfer up to 10 C.

FUJIGEN KOGYO Co., Ltd.

Men 45° Φ10

FUJIGEN KOGYO Co., Ltd.

Nanopel Orang Ganjil　SCN0845E

It is now possible to perform machining on areas where chamfering or fumigation could not be performed due to interference from vise or clamp.
Center hole/fizzle processing, countersunk chamfering, and edge chamfering are possible.

FUJIGEN KOGYO Co., Ltd.

Lengan Untuk NICECUT (Tipe Negatif S, 3 Bagian)　AMNS-03

The machining type can be changed by replacing the arm.
Face milling.

FUJIGEN KOGYO Co., Ltd.

Lengan Untuk NICECUT (Tipe Negatif S, 6 Potongan)　AMNS-06

The machining type can be changed by replacing the arm.
Face milling.

FUJIGEN KOGYO Co., Ltd.

Lengan Untuk NICECUT (Tipe T Negatif, 3 Bagian)　AMNT-03

The machining type can be changed by replacing the arm.
Face milling.

FUJIGEN KOGYO Co., Ltd.

Lengan Untuk NICECUT (Tipe T Negatif, 6 Potongan)　AMNT-06

The machining type can be changed by replacing the arm.
Face milling.

FUJIGEN KOGYO Co., Ltd.

Aero Mill (Shank Φ12, Memesan Diameter (a.Negative Type)　ARN12-30S

The use of a small diameter shank makes it suitable for use in low-stiffness machines.
By using different negative and positive types of machining work, it is possible to machine under more optimal conditions.

FUJIGEN KOGYO Co., Ltd.

Aero Mill (Shank Φ16, Memesan Diameter (a.Negative Type)　ARN16-40S

The use of a small diameter shank makes it suitable for use in low-stiffness machines.
By using different negative and positive types of machining work, it is possible to machine under more optimal conditions.

FUJIGEN KOGYO Co., Ltd.

Aero Mill (Shank Φ12, Machining Diameter (Jenewa), Tipe Positif)　ARP12-30S

The use of a small diameter shank makes it suitable for use in low-stiffness machines.
By using different negative and positive types of machining work, it is possible to machine under more optimal conditions.

FUJIGEN KOGYO Co., Ltd.

Aero Mill (Shank Φ16, Machining Diameter (Jenewa), Tipe Positif)　ARP16-40S

The use of a small diameter shank makes it suitable for use in low-stiffness machines.
By using different negative and positive types of machining work, it is possible to machine under more optimal conditions.

FUJIGEN KOGYO Co., Ltd.

Tengahkan samurai aluminium mill Φ10 Type　AZ10-90-L120

Uses the cutting edge shape that is ideal for aluminum processing, resulting in good sharpness and reduces the occurrence of keri and burr.
Reduces deburring work after machining.

FUJIGEN KOGYO Co., Ltd.

Pusat samurai aluminium pabrik Φ10　AZ10-90-L75

Uses the cutting edge shape that is ideal for aluminum processing, resulting in good sharpness and reduces the occurrence of keri and burr.
Reduces deburring work after machining.

FUJIGEN KOGYO Co., Ltd.

Pusat samurai aluminium pabrik Φ4　AZ4-90-L60

Uses the cutting edge shape that is ideal for aluminum processing, resulting in good sharpness and reduces the occurrence of keri and burr.
Reduces deburring work after machining.

FUJIGEN KOGYO Co., Ltd.

Pusat samurai aluminium pabrik Φ6　AZ6-90-L75

Uses the cutting edge shape that is ideal for aluminum processing, resulting in good sharpness and reduces the occurrence of keri and burr.
Reduces deburring work after machining.

FUJIGEN KOGYO Co., Ltd.

Lembar burung M8　BC16-14XS-M8

Significantly shortens the conventional process of cap bolt seat grinding.
The seat grinding and chamfering of the lower hole are performed simultaneously, and the depth of machining can be freely adjusted.

FUJIGEN KOGYO Co., Ltd.

Lembar burung M10　BC20-17.5XS-M10

Significantly shortens the conventional process of cap bolt seat grinding.
The seat grinding and chamfering of the lower hole are performed simultaneously, and the depth of machining can be freely adjusted.