Fukudaseiko

Counterbore (Heksagon Head Bolt, Baut Yang Berlaku: Diameter Luar M3 x 5.9 x Guide diameter: 3,2)

Fukudaseiko

Long Shank Counterbore (Heksagon Head Bolt, Baut Yang Berlaku: Diameter Luar M3 x 6.5 x Guide diameter: 3,2)

Fukudaseiko

Counterbore (Flat Countersunk Screw, Diameter Luar 7.5 x Guide diameter: 3,2 x Total panjang 38)

Fukudaseiko

3C Mills (sumbat kepala soket MC Permukaan Cutter) 10 3C10 3C　3C10

With the machining center, not only the flat part but also the part on the slope or curved surface which is difficult to enter the drill in the past, center rubbing, seat rolling and chamfering can be done in a single process.
Center massage.

Fukudaseiko

3C Mills (sumbat kepala soket sumsum MC Permukaan Cutter) 12 3C12 3C　3C12

With the machining center, not only the flat part but also the part on the slope or curved surface which is difficult to enter the drill in the past, center rubbing, seat rolling and chamfering can be done in a single process.
Center massage.

Fukudaseiko

3C Mills (semangkuk kepala soket MC Surface Cutter) 14 3C14 3C　3C14

With the machining center, not only the flat part but also the part on the slope or curved surface which is difficult to enter the drill in the past, center rubbing, seat rolling and chamfering can be done in a single process.
Center massage.

Fukudaseiko

3C Mills (sumbat kepala soket MC Surface Cutter) 16 3C16 3C　3C16

With the machining center, not only the flat part but also the part on the slope or curved surface which is difficult to enter the drill in the past, center rubbing, seat rolling and chamfering can be done in a single process.
Center massage.

Fukudaseiko

3C Mills (sumbat kepala soket MC Permukaan Cutter) 3 3C3　3C3

With the machining center, not only the flat part but also the part on the slope or curved surface which is difficult to enter the drill in the past, center rubbing, seat rolling and chamfering can be done in a single process.
Center massage.

Fukudaseiko

3C Mills (Sketsa kepala baut MC Permukaan Cutter) 4 3C4 3C　3C4

With the machining center, not only the flat part but also the part on the slope or curved surface which is difficult to enter the drill in the past, center rubbing, seat rolling and chamfering can be done in a single process.
Center massage.

Fukudaseiko

3C Mills (sumbat kepala soket MC Permukaan Cutter) 5 3C5 3C　3C5

With the machining center, not only the flat part but also the part on the slope or curved surface which is difficult to enter the drill in the past, center rubbing, seat rolling and chamfering can be done in a single process.
Center massage.

Fukudaseiko

3C Mills (Sketsa kepala baut MC Permukaan Cutter) 6 3C6 3C　3C6

With the machining center, not only the flat part but also the part on the slope or curved surface which is difficult to enter the drill in the past, center rubbing, seat rolling and chamfering can be done in a single process.
Center massage.

Fukudaseiko

3C Mills (Sketsa kepala baut MC Permukaan Cutter) 8 3C8 3C　3C8

With the machining center, not only the flat part but also the part on the slope or curved surface which is difficult to enter the drill in the past, center rubbing, seat rolling and chamfering can be done in a single process.
Center massage.

Fukudaseiko

10 CBT10　CBT10

Milling for hexagon socket bolts.
The nominal dimensions are the same as those of the commercially available bolts with holes.

Fukudaseiko

12 CBT12　CBT12

Milling for hexagon socket bolts.
The nominal dimensions are the same as those of the commercially available bolts with holes.

Fukudaseiko

14 CBT14　CBT14

Milling for hexagon socket bolts.
The nominal dimensions are the same as those of the commercially available bolts with holes.

Fukudaseiko

16 CBT16　CBT16

Milling for hexagon socket bolts.
The nominal dimensions are the same as those of the commercially available bolts with holes.

Fukudaseiko

18 CBT18　CBT18

Milling for hexagon socket bolts.
The nominal dimensions are the same as those of the commercially available bolts with holes.

Fukudaseiko

Counterbore (taper shank) 20 CBT20　CBT20

Milling for hexagon socket bolts.
The nominal dimensions are the same as those of the commercially available bolts with holes.

Fukudaseiko

Counterbore (taper shank) 22 CBT2　CBT22

Milling for hexagon socket bolts.
The nominal dimensions are the same as those of the commercially available bolts with holes.

Fukudaseiko

Counterbore (taper shank) 24 CBT24　CBT24

Milling for hexagon socket bolts.
The nominal dimensions are the same as those of the commercially available bolts with holes.

Fukudaseiko

Counterbore (taper shank) 30 CBT30　CBT30

Milling for hexagon socket bolts.
The nominal dimensions are the same as those of the commercially available bolts with holes.

Fukudaseiko

Counterbore (taper shank) 36 CBT36　CBT36

Milling for hexagon socket bolts.
The nominal dimensions are the same as those of the commercially available bolts with holes.

Fukudaseiko

Counterbore (taper shank) 42 CBT42　CBT42

Milling for hexagon socket bolts.
The nominal dimensions are the same as those of the commercially available bolts with holes.

Fukudaseiko

Counterbore (taper shank) 45 CBT45　CBT45

Milling for hexagon socket bolts.
The nominal dimensions are the same as those of the commercially available bolts with holes.

Fukudaseiko

Counterbore (taper shank) 48 CBT48　CBT48

Milling for hexagon socket bolts.
The nominal dimensions are the same as those of the commercially available bolts with holes.

Fukudaseiko

Penunjuk rasa 10 EPCB10　EPCB10

Used for sinking holes in extrusion pins for plastic molds.
For extrusion pins.

Fukudaseiko

Penunjuk rasa 12 EPCB12　EPCB12

Used for sinking holes in extrusion pins for plastic molds.
For extrusion pins.

Fukudaseiko

Penunjuk rasa 14 EPCB14　EPCB14

Used for sinking holes in extrusion pins for plastic molds.
For extrusion pins.

Fukudaseiko

Penunjuk rasa 16 EPCB16　EPCB16

Used for sinking holes in extrusion pins for plastic molds.
For extrusion pins.

Fukudaseiko

pin untuk Extrusion Counterbore 2 EPCB2　EPCB2

Used for sinking holes in extrusion pins for plastic molds.
For extrusion pins.

Fukudaseiko

Extrusion Penanggulangan 2.5 EPCB2.5　EPCB2.5

Used for sinking holes in extrusion pins for plastic molds.
For extrusion pins.

Fukudaseiko

Extrude pin Counterbore 3 EPCB3　EPCB3

Used for sinking holes in extrusion pins for plastic molds.
For extrusion pins.

Fukudaseiko

Extrusion Counterbore 3.5 EPCB3.5　EPCB3.5

Used for sinking holes in extrusion pins for plastic molds.
For extrusion pins.

Fukudaseiko

Extrude 4 EPCB4　EPCB4

Used for sinking holes in extrusion pins for plastic molds.
For extrusion pins.

Fukudaseiko

Penunjuk rasa 4.5 EPCB4.5　EPCB4.5

Used for sinking holes in extrusion pins for plastic molds.
For extrusion pins.

Fukudaseiko

Extrude 5 EPCB5　EPCB5

Used for sinking holes in extrusion pins for plastic molds.
For extrusion pins.

Fukudaseiko

Penghitung EPCB6　EPCB6

Used for sinking holes in extrusion pins for plastic molds.
For extrusion pins.

Fukudaseiko

Extrude pin Counterbore 7 EPCB7　EPCB7

Used for sinking holes in extrusion pins for plastic molds.
For extrusion pins.

Fukudaseiko

Extrude PCB8　EPCB8

Used for sinking holes in extrusion pins for plastic molds.
For extrusion pins.

Fukudaseiko

Extrusion Penghitung 9 EPCB9　EPCB9

Used for sinking holes in extrusion pins for plastic molds.
For extrusion pins.