AS ONE Corporation

emergency stop switch　EMOF

Schneider Electric

Emergency Button Harmony XB4 Series　XB4BS8444

Product Details
Harmony XB4 emergency stop push button

Schneider Electric

Emergency Button Harmony XB5 Series　XB5AS8444

Harmony XB5 emergency stop push button
The XB5 series of plastic push buttons combines ease of installation, flexibility and ruggedness for most industrial applications. One of the most comprehensive commercial product lines.

Schmersal

Schmersal TRIANGULAR KEY TK-M5 Key, For Use With AmGard Locks, mGard Locks　TRIANGULAR KEY TK-M5

CSA, BG, UL. Schmersal AZM170 Solenoid Interlock Switch Accessories. A range of accessories for the AZM170 solenoid interlock switches from Schmersal. AZM 170-B6, 50mm, flexible AZ 17/170-B1, 140mm, straight, rigid AZ 17/170-B15, 140mm, angled AZ 17/170-B11, 140mm, straight AZ 17/170-B5, 140mm, angled AZ 17/170-B1-2245, 140mm, straight, rubber mounting

APEM

APEM, Red, Twist to Reset 24mm Mushroom Head Emergency Button　A01ES-DM+A0154B-D+A01YL1

BEAB, VDE, UL ; CSA (Emergency Stop, VDE, UL ; CSA only). Single and double pole PCB socket accessories are suitable for illuminated pushbuttons only. AO1 Series Switches - 16mm Operators. Modular construction illuminated and non illuminated Pushbutton, Keylock, Rotary and Emergency Stop switches to fit industry standard 16mm diameter cut-outs. Round, square and rectangular operators can be fitted to single, double, three and four pole switch blocks for a variety of applications. A complete Pushbutton switch assembly requires an operator, switch block, lens and lamp (if illuminated). Keylock and Rotary switches require an operator and switch block, while the Emergency Stop switch comes as a complete assembly supplied with a double pole N/C switch block and a yellow self adhesive label. Panel sealing to IP65 Gold plated silver contacts Pushbuttons illuminated with T1 midget groove filament lamp or LED Keylocks supplied with 2 keys Rotary lever switches ; 219-5784 219-5784 ; ; 219-5762 219-5762 feature CW lever rotation, all others are CCW lever rotation For switch blocks ; lenses see stk nos ; 219-5829 219-5829 ; ; 239-3483 239-3483 typically Selection of accessories includes flipguards, flush mounting bezels, PCB sockets and installation tools, see stk nos ; 278-1262 278-1262 , ; 325-2800 325-2800 , ; 325-2816 325-2816 ; ; 241-5757 241-5757 typically

Telemecanique Sensors

Telemecanique Sensors XCSZ01 Actuator, For Use With XCSA Safety Switch, XCSB Safety Switch, XCSE Safety Switch　XCSZ01

Conforms to EN1088, EN60204. Actuators must be purchased separately, see accessories table. XCSA Safety Interlock Switch. 3 positive opening contacts as standard (on guard opening) A key operated lock enables positive locking of the guard Optional version with orange LED to indicate guard open/closed Heavy duty metal DIN style Turret heads can be rotated through 360° in 90 steps 8 actuator entries and 1 tapped entry 20N minimum operating force for positive opening IP67 rating Productivity is increased due to the third contact dedicated to diagnostics Preventa XCS Safety Switches

Telemecanique Sensors

Telemecanique Sensors XCSZ02 Actuator, For Use With XCSA Safety Switch, XCSB Safety Switch, XCSE Safety Switch　XCSZ02

Conforms to EN1088, EN60204. Actuators must be purchased separately, see accessories table. XCSA Safety Interlock Switch. 3 positive opening contacts as standard (on guard opening) A key operated lock enables positive locking of the guard Optional version with orange LED to indicate guard open/closed Heavy duty metal DIN style Turret heads can be rotated through 360° in 90 steps 8 actuator entries and 1 tapped entry 20N minimum operating force for positive opening IP67 rating Productivity is increased due to the third contact dedicated to diagnostics Preventa XCS Safety Switches

Telemecanique Sensors

XCSPA Safety Interlock Switch, Fibreglass, 2NC　XCSPA791

Complies with EN1088, EN60204. XCS PA Series, Miniature. 2 positive opening contacts as standard, on guard opening Head rotates in 90° steps giving 8 actuator entry points Minimum operating force for positive opening: 15N Ingress protection IP67 1 x cable entry tapped M16 x 1.5 ISO or PG11 Actuator needs ordering separately (see stock no. ; 252-3870 252-3870 typically)

Schneider Electric

Schneider Electric Harmony, Red/Yellow/Grey, Twist to Reset 40mm Mushroom Head Emergency Button　XALK178F

Schneider Electric / Harmony XALK Series / Emergency Stop Push Button Switch. The Harmony XALK range of emergency push buttons by Schneider offer you easier, flexible installation. Strong polycarbonate material, means greater reliability in harsh environments. High-grade e-stop function, the mushroom head emergency button trigger action offers an instantaneous cutoff once the alarm is raised to ensure total safety in your working environment. Harmony XALK from Schneider is compliant with EN/IEC 60204-1 and EN/ISO ; Machinery Directive 2006/42/EC. Features and benefits. Bright Yellow RAL 7035 ; Light Grey RAL 7035 panel base unit for greater visibility and awareness in your working environment. Mushroom head push button, red unmarked for clear visibility. Easily resettable with turn-to-release. IP65, IP69K, IP67, IP66, NEMA 4 dust and damp proofing as standard - ensuring reliability in harsh environments. Greater resistance to chemicals and/or double electrical insulation. Low-load electrical contacts (1 NO + 1 NC contact) unmarked for instant cutoff where needed. Plug ; Play surface mountable. Turn to release easily resettable control where the unit has been alerted and activated for easier Start-Stop operations. Screw clamp connection, with pins for printed circuits Reliable short-circuit protection, featuring a 10 A fuse cartridge within the Emergency Push Button. Schneider Green Premium product as standard across the XALK Emergency Stop Button range. 18-month manufacturer warranty with Schneider Compact in nature perfect for confined spaces where E-stops are critical for dangerous machinery. Applications. Energy infrastructure industries Food and Beverage industries Water and Waste Water management systems Metal, Mining and Minerals industries Oil and Gas industries Marine ; Oil Car Washes

Schneider Electric

Schneider Electric Harmony, Red, Twist to Reset 40mm Mushroom Head Emergency Button　ZB4BS844

All heads require a body/ fixing collar and contact bodies. Schneider Electric / Harmony ZB4-B Series / Emergency Stop Push Button Switch. Introducing the Harmony ZB4-B series of push button switch from Schneider Electric. This particular e-stop button has a snap-fit assembly which is tightened with a single screw, providing you with easy to secure mounting. Harmony ZB4-B series from Schneider meets the most demanding international standards and approvals, such as EN/IEC 60204-1 and EN/ISO ; Machinery Directive 2006/42/EC. Note: All heads require a body/fixing collar and contact bodies. Features and benefits. Easy mountable, using a single installer (Self-maintaining of the head in its cut-out). Clip-together component system (head, body, contact blocks). Chromium plated metal, durable and easy to recycle The switch has great resistance to electric shock, conforming to the machine safety standards of the IEC (Class 1) Single locking screw, making the button easy to mount, reliable and secure. Mushroom head push button switch, red unmarked for clear visibility. Easily resettable with turn-to-release. IP65, IP69K, IP67, IP66, NEMA 4, NEMA 4X, NEMA 12 ; NEMA 13 dust and damp proofing as standard - ensuring reliability in harsh environments. Greater resistance to chemicals and/or double electrical insulation. Compact in nature perfect for confined spaces where E-stops are critical for dangerous machinery. Turn to release easily resettable control where the unit has been alerted and activated for easier Start-Stop operations. Schneider Green Premium product as standard across the XALK Emergency Stop Button range. 18-month manufacturer warranty with Schneider. Applications. Energy infrastructure industries (control panels, machinery operation, packaging) Food and Beverage industries (restaurants, kitchens - IP66 waterproofing is perfect for wash-down procedures) Water and Waste Water management systems (control panels, machinery operation, packaging) Metal, Mining and Minerals industries (material handling, pumping/working) Oil and Gas industries (pumping control panels, dangerous machinery)

Pilz

Pilz P2HZ X3 24 V dc Safety Relay Dual Channel With 2 Safety Contacts　774350

PILZ P2HZ X3 Safety Relay. The PILZ P2HZ X3 range is an affordable, durable and reliable safety relay designed with two handed control units in mind. Useful when you need to control your press controllers and safety circuits. Features and benefits. Specially designed for two handed control/operation. The P2HZ series will not function unless the operator has their hands outside the danger zone area during hazardous movement. LED indicator for switching your channel status from 1 to 2 and also to monitor your supply voltage Single or Dual channel input operation (Single channel are used more beneficially with smaller type machines where you need to use a dedicated logic device that only has a small function to cut off in an emergency – Dual allows you to take control of more safety circuits and control a greater amount of control zones at any given time) Suitable for DIN rail mounting Durable and has an extended service life vs. competitors Positive guided relay outputs (2 safety contacts, 1 auxiliary). Safety features. The relay will provide the circuit self-monitoring. The safety functions of the device remain in effect even in the case of component failures. The relay will prevent the circuit from further press strokes in the case of, relay failures, contact welding, coil defects or open/short circuits. Applications. Mechanical presses Hydraulic presses General safety circuits (in accordance with EN 60204-1). Technical safety parameters. EN 60204-1 EN 954-1 EN (IEC) 62061 EN ISO 13849-1 IEC 61511 – SIL 3

Schneider Electric

E Stop 40mm Trig Act Turn Rel Red 1NO1NC　XB4BS8445

Schneider Electric / Harmony XB4 Series / Emergency Stop Push Button Switch 22 mm. Introducing the Harmony ZB4-B series of push button switch from Schneider Electric. This particular e-stop button has a snap-fit assembly which is tightened with a single screw, providing you with easy to secure mounting. Harmony ZB4-B series from Schneider meets the most demanding international standards and approvals, such as EN/IEC 60204-1 and EN/ISO ; Machinery Directive 2006/42/EC. These mushroom head E-Stops come with the complete button head, fixing collar and contact block. Features and benefits. Easy mountable, using a single installer (Self-maintaining of the head in its cut-out). Clip-together component system (head, body, contact blocks). Chromium plated metal, durable and easy to recycle Shock protection level up to IK06 providing additional machine ; personnel safety in emergency situations including shock or electrocution. Single locking screw, making the button easy to mount, reliable and secure. Mushroom head push button switch, red unmarked for clear visibility. Easily resettable with turn-to-release. High vibration resistance combined with shake-proof terminal screws perfect for a moving panel or parts. 1 NO + 1 NC Contact(s) - suitable for varying applications and scenarios. 22 mm cut-out size - fits with a wide range of other Schneider Contact Block base units. Conformity to the highest industry standards for machine safety including: - IEC, UL, CSA, CCC EAC ; JIS standards, as well as CE marking ; Marine approvals IP65, IP69K, IP67, IP66, NEMA 4, NEMA 4X, NEMA 12 ; NEMA 13 dust and damp proofing as standard - ensuring reliability in harsh environments. Greater resistance to chemicals and/or double electrical insulation. Compact in nature making them perfect for confined spaces where E-stops critical for safety and security. Turn to release easily resettable control where the unit has been alerted and activated for easier Start-Stop operations. Schneider Green Premium product as standard across the XB4 Emergency Stop Button range. 18-month manufacturer warranty with Schneider. Applications. Food and Beverage industries (restaurants, kitchens - IP66 waterproofing is perfect for wash-down procedures) Automotive industries (particularly with a lot of moving machinery ; devices) Energy distribution panels, public works, commercial buildings, airports.

Schneider Electric

Schneider Electric Push Button Head　ZB5AS844

IEC, JIS. UL, CSA. Schneider Electric / Harmony XB5 Series / Emergency Stop Push Buttons /. The Harmony XB5 range of plastic emergency push buttons offers easy ; flexible installation. The unit itself is extremely robust, suitable for the majority of industrial applications. Ergonomically designed for easy operation. The XB5 push button offers easy panel mounting and improves the overall look and feel of your emergency stop control panel systems. Compact but prominent, the XB5 is at the forefront of machine safety. Ideal for areas that require resistance to chemicals and/or double electrical insulation. Features and benefits. An instantaneous disconnect of your circuit upon alarm ; activation of this emergency stop control unit Modular system, nearly all shapes and functions are compatible with each other (if you need to switch the push buttons head you can do so without changing the other parts) Conformity with IEC, UL, CSA standards - giving you the reassurance of reliability and safety in your industry IP65/66 (dust / damp proof, immersion protection) IP67 (dust tight, heavy seas protection) IP69K - suitable for heavy-duty cleaning (high-pressure washers - 7,000,000 Pa at 55°C, distance: 0.1 m) Low-load electrical contact (for greater efficiency ; reassurance) NEMA rated 4X offering further reassurances against dust and corrosion. Schneider Green Premium guarantee (Environmentally friendly ; sustainable with minimal hazardous substances used in the construction of the devices, allowing more options for end of life recycling) "Plug ; Play" Clip together design (head, body, contact blocks) Anti-Loosing system for screw clamp terminals on contact blocks, preventing disconnects from the base unit The XB5 E-Stop button comes in varying sizes, including 22 mm cut out (compact in nature, but prominent in design and colour). Applications. Energy infrastructure industries Food and Beverage industries Water and Waste Water management systems Metal, Mining and Minerals industries Oil and Gas industries

Pilz

Pilz PSWZ X1P 24 → 240 V ac/dc Safety Relay Single or Dual Channel With 2 Safety Contacts　777949

VDE 0113; EN 60204-1; IEC 204-1. BG, UL, CUL. PSWZX1P Safety Relay by PILZ. The PSWZX1P range of safety relays from PILZ offers you safety and performance all in one. The PSWZX1P offers you different modes of operation such as single or dual channel switches. Suitable specifically for operating your safe standstill machinery or tools that are deemed dangerous or hazardous to health. Features and benefits:. DIN rail mounted with screw terminals LED display that offers you the following measures: - Supply voltages - Standstill on Channel 1 / 2 - Switch status - Fault signal if simultaneity time is exceeded Semiconductor output signal (input for reset function): - Error - Switch status Measure inputs for single or three-phase motors Measuring voltage is selectable Feedback loop is in operation Plug in connection terminals is possible. Safety features:. Relays K1 ; K2 are interlocked specifically designed so that the unit cannot be switched back on in the case of contact welding or an open circuit (ensuring your safety at all times) The unit will monitor and measure and look out for an open circuit. If the circuit does open, the unit will immediately switch itself off to prevent hazards The standstill motor which is unique to the PSWZ X1P prevents the plant from being enabled, in the following cases: - Power supply failure - Component failure - Measuring circuits are open circuit - Coil deflect / open circuit. Applications:. B>Safe standstill monitoring – this is the units main purpose and is specifically designed for safe standstill where areas of operation such as plants have dangerous machinery or tools in use. Safe standstill monitoring is only detected on power free measuring circuits. Any residual voltages, induced voltages or drives with in the position control will prevent the relay from its main function so take this into consideration when in use. Technical safety parameters:. EN 60204-1 EN 62061 EN ISO 13849-1 EN ISO 14119 VDE 0113-1

ABB

ABB Compact, Red, Twist to Reset 30mm Mushroom Head Emergency Button　CE3T-10R-11

EN50013, EN60947-1, EN60947-5-1. UL,CSA. Key release type supplied with 2 keys. Emergency Stop Pushbuttons. All in one emergency stop push buttons with integrated contacts, available with 30mm or 40mm actuator heads. IP69K rated for harsh environments Temperature range - 25 → + 70 °C 22.5mm hole mounting

Schneider Electric

Schneider Electric, Red/Yellow/Grey, Twist to Reset 40mm Mushroom Head Emergency Button　XALK178E

Schneider Electric / Harmony XALK Series / Emergency Stop Push Button Switch. The Harmony XALK range of emergency push buttons by Schneider offer you easier, flexible installation. Strong polycarbonate material, means greater reliability in harsh environments. High-grade e-stop function, the mushroom head emergency button trigger action offers an instantaneous cutoff once the alarm is raised to ensure total safety in your working environment. Harmony XALK from Schneider is compliant with EN/IEC 60204-1 and EN/ISO ; Machinery Directive 2006/42/EC. Features and benefits. Bright Yellow RAL 7035 ; Light Grey RAL 7035 panel base unit for greater visibility and awareness in your working environment. Mushroom head push button, red unmarked for clear visibility. Easily resettable with turn-to-release. Plug ; Play surface mountable. IP65, IP69K, IP67, IP66, NEMA 4 dust and damp proofing as standard - ensuring reliability in harsh environments. Low-load electrical contacts (1 NO + 1 NC contact) unmarked for instant cutoff where needed. Turn to release easily resettable control where the unit has been alerted and activated for easier Start-Stop operations. Screw clamp connection, with pins for printed circuits Reliable short-circuit protection, featuring a 10 A fuse cartridge within the Emergency Push Button. Schneider Green Premium product as standard across the XALK Emergency Stop Button range. 18-month manufacturer warranty with Schneider. Applications. Energy infrastructure industries Food and Beverage industries Water and Waste Water management systems Metal, Mining and Minerals industries Oil and Gas industries

Schneider Electric

Schneider Electric Harmony, Red, Twist to Reset 30mm Mushroom Head Emergency Button　XB6AS8349B

Schneider Electric / Harmony XB6 Series / Emergency Stop Push Button. Introducing the Harmony XB6 series of E-Stop Push Buttons. This range of spring-return pushbuttons features the typical 'mushroom' head emergency stop shape. Reliable, durable and secure, the XB6 series of emergency push button switch grants you reassurance in your workplace. Harmony XB6 series from Schneider meets the most demanding international standards and approvals, such as CSA C22-2 No 14 ; EN/ISO 13850. Features and benefits. Easy mountable, using a single installer (Self-maintaining of the head in its cut-out). Clip-together component system (head, body, contact blocks). Ronis 200 key lock as standard to secure your e-stop push button switches Short-circuiting protection via 6 A cartridge fuses type gG (1,000,000 cycles of electrical durability). Single locking screw, making the button easy to mount, reliable and secure. Mushroom head push button switch, red unmarked for clear visibility. Easily resettable with turn-to-release. High vibration resistance ; shock resistance providing further uses in environments that require these types of resistances. 1 NO + 2 NC Contact(s) - suitable for varying applications and scenarios. Conformity to the highest industry standards for machine safety including: - CE, UL, CSA, CCC standards - IP65 rated - perfect for dusty environments Rated NEMA 4, 4X ; 13 - offering greater dust and damp proofing, perfect for harsh environments. Greater resistance to water interference such as pressure washing. Compact in nature making them perfect for confined spaces where E-stops critical for safety and security. Schneider Green Premium product as standard across the XB6 Emergency Stop Button range. 18-month manufacturer warranty with Schneider. Applications. Industrial/Commercial building settings where control boards, surveillance rooms or alarms may exist. Laboratories ; medical instrumentation where critical cut off may be necessary. Transport sectors

Telemecanique Sensors

XCSB Safety Interlock Switch, Zamak, 1NC/2NO　XCSB501

IEC 60947, EN 292, EN 60204, EN 1088. UL, CSA. With the appropriate monitoring system and correctly wired these switches can reach safety category 4 conforming to EN/ISO 13849-1, PL e conforming to EN/ISO 13849-1, SIL 3 conforming to EN/IEC 61508. XCSB Safety Interlock Switch. The Schneider XCSB series is an industrial safety interlock switch with manual locking and unlocking of the actuator via a pushbutton. The XCSB offers protection of operators by stopping the machine when the actuator (attached to the machine guard) is withdrawn from the head of the safety switch. It has a red metal housing with a key operated turret head and one tapped M20x1.5 cable entry. 3 safety contacts, slow-break, break before make Manual unlocking via pushbutton Metal body Drive head can be moved 90° in each direction 8 possibilities for inserting the actuating key 20 N minimum force for positive opening IP67 protection in accordance with EN/IEC 60529 and EN/IEC 60947-5-1 4 different actuator keys available, please order separately

Schmersal

Schmersal BPS 16 Actuator, For Use With BNS 16 Safety Switch　BPS 16

EN60947-5-3 standard is only met if entire system consisting of safety sensor (BNS16), magnet (BPS16) and a safety monitoring module (AES) is used.

Schmersal

Schmersal BPS 260-1 Actuator, For Use With BNS 260 Safety Switch　BPS 260-1

EN60947-5-3 standard is only met if entire system consisting of safety sensor (BNS260), magnet (BPS260) and a safety monitoring module (AES) is used. IEC/EN60947-5-3, BG-GS-ET-14. Actuating magnet not included, see accessories, for example ; 617-5374 617-5374 // ; 617-5380 617-5380. BNS 260, Miniature Coded. Smallest design Actuation only possible with BPS260, available separately Left-hand or right-hand side versions for door-mounting Control category up to 4 to EN954-1 IP67 protection

Schmersal

AZ16 Safety Interlock Switch, Fibreglass, 1NC/1NO　AZ16ZVRK-M20

IEC/EN60947-5-1, BG-GS-ET-15. BG, UL, CSA

ABB

ABB Vital 24 V dc Safety Relay With 2 Safety Contacts　2TLA020052R1000

UL, CSA. Unused ports on the Tina 4A and 8A must be blanked by using a Tina 1A blanking plug. Vital Safety Controller, Base Unit. The Vital safety device from ABB is the heart of a new solution which makes it possible to install/connect many different types of safety device in the same safety circuit and still achieve safety category 4 in accordance with EN 954-1/EN ISO 13849-1. The Vital module is based upon a dynamic single-channel concept as opposed to conventional dual-channel safety relays. ABB have designed this unit to accommodate up to 30 dynamic sensors within the safety circuit which can be supervised by one Vital module. The Vital unit can therefore replace several safety relays. Safety components with output contacts can be connected to the Vital via low cost Tina adaptors. The Vital also has automatically or manually supervised reset selection, dual safety outputs, and an information output for reset indication and status information for PLC's. Cost-effective cable routing/connections Information output with two functions LED indication of: power supply, dynamic signal and outputs Detachable connector blocks Two NO safety outputs Manually supervised or automatic reset Can accommodate long cable lengths Standard width: 22.5 mm IP40 protection class rating A mechanical life of >10 ;sup>7 ;/sup> operations Safety category 4, according to EN 954-1/EN ISO 13849-1 dynamic safety circuit

ABB

ABB 2TLA020070R5800 USB Cable, For Use With Pluto Safety Controller　2TLA020070R5800

TUV, FS, CSA. The IDFIX device ( ; 733-4824 733-4824 ) is connected between the input terminals ID and 0V (also note that the IDFIX device is not required when using a single Pluto, however the absense of an IDFIX requires to be stated when programming the Pluto device.). Pluto Safety PLC, Base Unit. Pluto from ABB is an "All-Master" safety PLC concept, which simplifies the design of safety systems and achieves the highest safety category 4 according to EN 954-1. All Pluto's are Master units and can see the other Pluto's inputs, outputs and global memories. This enables the Pluto to evaluate the information from the other Pluto's and then take decisions concerning its own safety devices. The Gateway units are available for several different bus systems, i.e. Profibus ( ; 733-4836 733-4836 ), CanOpen ( ; 733-4830 733-4830 ), Devicenet ( ; 733-4849 733-4849 ) and Ethernet ( ; 733-4842 733-4842 ). Of Pluto's inputs (the smallest unit has 16 I/O), thus can be configured as either inputs or outputs. In the Pluto family by ABB most modules have dual safety outputs - potential free or PNP types. In a two-wire bus system up to 32 Pluto units can be safely connected and communicate with a superior system via a Gateway or HMI displays. Therefore within a maximum extended system 1472 I/O's can be connected. Also all input components may be connected in series for even more complexity and optimisation. Simple and easy programming facilities Easy to configure and install Up to 640 I/O's Multiple Plutos can be connected on a bus (via using the IDFIX identifier) and then further interfaced with external networks by using a Gateway, typical example RS stock number ( ; 733-4842 733-4842 ) High safety level Free software available Programming over the bus 35 mm DIN rail mounting The IDFIX ( ; 733-4824 733-4824 ) is an identification circuit which allows multiple Plutos to be identified when connected on a bus system. This module is available to distribute a PLC program within a network of Pluto devices. Tina adapters such as ( ; 733-2477 733-2477 ) can be used to connect external safety monitoring equipment

ABB

ABB Compact, Red, Twist to Reset 40mm Mushroom Head Emergency Button　1SFA619550R1071

EN50013, EN60947-1, EN60947-5-1. UL,CSA. Key release type supplied with 2 keys. Emergency Stop Pushbuttons. All in one emergency stop push buttons with integrated contacts, available with 30mm or 40mm actuator heads. IP69K rated for harsh environments Temperature range - 25 → + 70 °C 22.5mm hole mounting

APEM

Apem, Red, Pull to Reset 34mm Mushroom Head Emergency Button　ES1S41653001

Apem Heavy-Duty Emergency Stop Pushbutton Switches - ES Series. Apem ES series heavy-duty emergency stop pushbutton switches are a rugged solution to a variety of heavy duty applications such as industrial lifts, air-conditioning panels or applications found within the oil and food industries. The ES series of emergency stop pushbutton switches feature IK10 impact resistance, IP65 frontal sealing and a push-pull function. 100,000 cycle mechanical life IK10 Impact resistance, no axis deformation even if exposed to major shocks Sealed to IP65 by O-ring and membrane Lower behind-panel depth Locked/unlocked status indicator

Siemens

Siemens 3SK1 24 V ac/dc Safety Relay Single Channel With 4 Safety Contacts　3SK1111-1AB30

The 3SK1 safety relay can be used in Emergency Off / Emergency Stop devices in accordance with ISO 13850 and in safety circuits in accordance with VDE 0113-1 and/or DIN EN 60204-1. Depending on the external circuit, it is possible to achieve SILCL 3 in accordance with IEC 62061, SIL 3 in accordance with IEC 61508 and PL e (Cat. 4) in accordance with ISO 13849-1. SIRIUS 3SK1 Standard Safety Relay. The safety relays of the Standard series can be configured as stand alone devices or as an expandable solution with conventional wiring technology. The focus of the Standard series is on: single devices for simple safety applications, output side expansion by means of expansion units and external wiring. No expansion is possible on the input side. Applications. Emergency Off / Emergency Stop monitoring Monitoring of protective doors with electromechanical position switches, solid state position switches, or solenoid switches Monitoring of contact free protection equipment, e.g. light arrays / light barriers, or laser scanners. 3SK1111 Standard basic unit instantaneous (with relay outputs). The SIRIUS 3SK1111 is a two-channel safety relay for EMERGENCY OFF and EMERGENCY STOP equipment in accordance with EN 60204-1. The unit is equipped with a positively driven relay and monitors itself during every ON/OFF cycle. The safety relay has three enabling circuits (safety related circuits) as NO circuits and a signalling circuit (non-safety related circuit, NC contact). On the front of the 3SK1111 basic unit there is a slide switch for function setting and two LEDs for displaying the operating states. 2 sensor inputs (channels 1 and 2) 1 input for feedback circuit and START button 3 enabling circuits (safety related circuits, NO contacts) 1 signalling circuit (non-safety related circuit, NC contact) 2 LEDs for displaying the operating states Slide switch for function setting Single channel or two channel connection Cross circuit detection between sensor channels 1 and 2 Enclosure width 22.5 mm Removable terminals. 3SK1112 Standard basic unit instantaneous (with solid-state outputs). The SIRIUS 3SK1112 safety relay has two safety related solid state safe outputs and one non-safety related signalling circuit. On the front of the safety relay there is a 4-way DIP switch for function setting and 4 LEDs for status and function display. The SET / RESET button is used to load function settings and to restart the unit (reset). On commissioning, the 3SK1112 standard basic unit runs through a self test. This checks that the internal electronics and firmware are functioning correctly. All internal safety critical parts of the circuit are cyclically monitored for faults during operation. 4-way DIP switch for function setting (parameterization) SET / RESET button 4 LEDs for status and function display 2 sensor inputs (channels 1 and 2) 1 input (cascading circuit) 1 input (START pushbutton circuit) 1 input (feedback circuit) 2 test outputs 2 safe solid state outputs 1 solid state signalling circuit Enclosure width 22.5 mm Removable terminals

Schneider Electric

Schneider Electric Harmony, Yellow, Twist to Reset 40mm Mushroom Head Emergency Button　XALK178

Schneider Electric / Harmony XALK Series / Emergency Stop Push Button. The Harmony XALK range of Emergency Push Stop Buttons by Schneider offers you reliable, durable and stable mounted push buttons for all your safety needs. Made for those situations where an effective halt to all operations is needed, this button gives you and your users quick cut off action to machinery and other equipment that could pose a risk to the health of yourself or other users. Quality is assured with this premium range, the safety of all key users is important, therefore these emergency stop push buttons are made to be durable and reliable in those emergency-like situations. Features and benefits. Easy to use "turn to release" functionality for easy reset once activated. Light grey RAL 7035 base enclosure, with a yellow RAL 1021 cover colour and a prominent, bold red push button for easy identification to its function. Durable Polycarbonate material, easy to clean and maintain with added durability for extended use (mechanical durability of 300,000 cycles). Short-circuit protection using a 10 A cartridge fuse which conforms to EN/IEC 60947-5-1. Conforming to several industry standards including, EN/IEC 60204-1, 60947-1, 60947-5-1 and more. Rated NEMA 13 ; NEMA 4X, providing additional protection against environmental disturbances such as dust, oil or spraying of water (primarily fit for indoor use) IP 65, IP 66, IP 67 ; IP 69K rated conforming to IEC 60536, further protecting your device from dust ("dust tight rated") and protected against heavy seas or powerful jet washers or splashes of water. Schneider Green Premium product as standard across the XALK Emergency Stop Button range. 18-month manufacturer warranty with Schneider. Applications. Machine, chemical ; Marine applications (particularly with water/chemical involvement). Service sectors such as restaurants, kitchens, car washes and more.

Schneider Electric

Schneider Electric Harmony, Red, Twist to Reset 40mm Mushroom Head Emergency Button　XB4BS8442

Schneider Electric / Harmony XB4 Series / Emergency Stop Push Button. Introducing the world-class Harmony XB4 series of emergency stop pushbuttons by Schneider Electric. The range of XB4 provides you with an extra safeguard in your working environment. The products within the XB4 series are notably durable and can perform well within various environments.. Features and benefits. Effortless to use "turn to release" functionality for easy reset once activated. Chromium plated metal panel with prominent red round push button, easily alerting to the eye. 2 NC contacts, for simple configuration. Short-circuit protection using a 10 A cartridge fuse which conforms to EN/IEC 60947-5-1. Conforming to several industry standards including, EN/IEC 60204-1, 60947-1, 60947-5-1 and more. Rated NEMA 13 ; NEMA 4X, providing additional protection against environmental disturbances such as dust, oil or spraying of water (primarily fit for indoor use) The XB4 E-Stop buttons have a mechanical durability of 300000 cycles The base unit E-Stop works well in temperatures ranging from -40°C to 70°C, IP 65, IP 66, IP 67 ; IP 69K rated conforming to IEC 60536, further protecting your device from dust ("dust tight rated") and protected against heavy seas or powerful jet washers at 7,000,000 Pa at 55 degrees Celsius. Schneider Green Premium product as standard across the XB6 Emergency Stop Button range. 18-month manufacturer warranty with Schneider. Applications. Machine, chemical ; Marine applications (particularly with water/chemical involvement). Service sectors such as restaurants, kitchens, car washes and more.

Schneider Electric

Schneider Electric Harmony, Red, Key Reset 40mm Mushroom Head Emergency Button　XB4BS9442

Schneider Electric / Harmony XB4 Series / Emergency Stop Push Button. Introducing the world-class Harmony XB4 series of emergency stop pushbuttons by Schneider Electric. The range of XB4 provides you with an extra safeguard in your working environment. The products within the XB4 series are notably durable and can perform well within various environments.. Features and benefits. Effortless to use "turn to release" functionality for easy reset once activated. Chromium plated metal panel with prominent red round push button, easily alerting to the eye. 2 NC contacts, for simple configuration. Short-circuit protection using a 10 A cartridge fuse which conforms to EN/IEC 60947-5-1. Conforming to several industry standards including, EN/IEC 60204-1, 60947-1, 60947-5-1 and more. Rated NEMA 13 ; NEMA 4X, providing additional protection against environmental disturbances such as dust, oil or spraying of water (primarily fit for indoor use) The XB4 E-Stop buttons have a mechanical durability of 300000 cycles The base unit E-Stop works well in temperatures ranging from -40°C to 70°C, IP 65, IP 66, IP 67 ; IP 69K rated conforming to IEC 60536, further protecting your device from dust ("dust tight rated") and protected against heavy seas or powerful jet washers at 7,000,000 Pa at 55 degrees Celsius. Schneider Green Premium product as standard across the XB6 Emergency Stop Button range. 18-month manufacturer warranty with Schneider. Applications. Machine, chemical ; Marine applications (particularly with water/chemical involvement). Service sectors such as restaurants, kitchens, car washes and more.

IDEM

IDEM, Red/Unpainted, Twist to Reset 40mm Round Head Emergency Button　231001

EN 60947-5-1, EN 60947-5-5, EN 954-1, EN 62061, UL 508, ISO 13850, ISO 13849-1. IDEM Stainless Steel Emergency Stop Switches. The ES-SS series from IDEM are standard duty emergency stop switches (E-Stops) designed to provide robust emergency stop protection for machines or exposed conveyors. They are suitable for use within virtually all industry sectors. IP69K stainless steel 316 can be high pressure hosed with detergents at high temperature 3 pole contact blocks provide positively operated switch contacts Conformance to ISO13850, EN60947-5-1 and EN60947-5-5 A special lid safety trip mechanism means that the safety contacts will open if the lid is removed Connects to most safety relays to give up to PLe Cat.4 Stock nos. ; 826-4404 826-4404 ; ; 826-4407 826-4407 have button protection shroud with padlock holes for Lock Off" in maintenance situations

IDEM

IDEM, Red/Unpainted, Twist to Reset 40mm Round Head Emergency Button　231002

EN 60947-5-1, EN 60947-5-5, EN 954-1, EN 62061, UL 508, ISO 13850, ISO 13849-1. IDEM Stainless Steel Emergency Stop Switches. The ES-SS series from IDEM are standard duty emergency stop switches (E-Stops) designed to provide robust emergency stop protection for machines or exposed conveyors. They are suitable for use within virtually all industry sectors. IP69K stainless steel 316 can be high pressure hosed with detergents at high temperature 3 pole contact blocks provide positively operated switch contacts Conformance to ISO13850, EN60947-5-1 and EN60947-5-5 A special lid safety trip mechanism means that the safety contacts will open if the lid is removed Connects to most safety relays to give up to PLe Cat.4 Stock nos. ; 826-4404 826-4404 ; ; 826-4407 826-4407 have button protection shroud with padlock holes for Lock Off" in maintenance situations

IDEM

IDEM, Red, Twist to Reset 40mm Round Head Emergency Button　230001

EN 60947-5-1, EN 60947-5-5, EN 954-1, EN 62061, UL 508, ISO 13850, ISO 13849-1. IDEM Plastic Emergency Stop Switch. The ES-P series from IDEM is a standard duty emergency stop switch (E-Stop) designed to provide robust emergency stop protection for machines or exposed conveyors. It is suitable for use within virtually all industry sectors. IP67 polyester housing 3 pole contact blocks provide positively operated switch contacts Conformance to ISO13850, EN60947-5-1 and EN60947-5-5 A special lid safety trip mechanism means that the safety contacts will open if the lid is removed Connects to most safety relays to give up to PLe Cat.4

Banner

STB Enclosed Push Button, Momentary, NO/NC, IP66　STBVR81

Turck Run Bar w/ STB Buttons w/o E-Stops. This run bar with STB buttons is designed for reduced hand, wrist and arm stress and requires no physical pressure to operate. This run bar is designed with two STB self-checking touch buttons that have a continuous internal self-checking operation, immunity to ambient light and a heavy excess gain to cut through heavy contamination. No hand, wrist or arm stress associated with mechanical push buttons LED Indicator lights whenever the output relay is activated

Phoenix Contact

Phoenix Contact PSR-MC30-2NO-1DO-24DC-SC 24 V dc Safety Relay Dual Channel With 2 Safety Contacts　2700498

EN ISO 13849-1, EN 62061, IEC 61508. CE, UL, cULus, TUV. Phoenix Contact PSRmini Safety Relay. The PSRmini safety relays from Phoenix Contact are the most narrow safety relay on the market to provide proven safety thanks to force-guided contacts. The Innovative relay technology offers maximum safety and high switching loads up to 6 A. The PSR-MS with a width of just 6 mm comes with 1 to 2 enabling paths, and the PSR-MC with a width of 12 mm comes with 2 to 3 enabling paths. They are available as a single or dual channel device suitable for monitoring emergency stops, safety doors and light curtains - as well as to control actuators. Features and Benefits. Compatible with all important signal transmitters and safety-relevant systems Screw and push-in spring connection Automatic reset, Automatic/Manual reset, Automatic/Manual/Monitored reset, Manual/Monitored reset options available Up to 70% space saved Easy and quick diagnosis given means shorter downtime

Phoenix Contact

Phoenix Contact PSR-MS25-1NO-1DO-24DC-SC 24 V dc Safety Relay Single Channel With 1 Safety Contact　2904951

EN ISO 13849-1, EN 62061, IEC 61508. CE, UL, cULus, TUV. Phoenix Contact PSRmini Safety Relay. The PSRmini safety relays from Phoenix Contact are the most narrow safety relay on the market to provide proven safety thanks to force-guided contacts. The Innovative relay technology offers maximum safety and high switching loads up to 6 A. The PSR-MS with a width of just 6 mm comes with 1 to 2 enabling paths, and the PSR-MC with a width of 12 mm comes with 2 to 3 enabling paths. They are available as a single or dual channel device suitable for monitoring emergency stops, safety doors and light curtains - as well as to control actuators. Features and Benefits. Compatible with all important signal transmitters and safety-relevant systems Screw and push-in spring connection Automatic reset, Automatic/Manual reset, Automatic/Manual/Monitored reset, Manual/Monitored reset options available Up to 70% space saved Easy and quick diagnosis given means shorter downtime

Phoenix Contact

Phoenix Contact PSR-MS35-1NO-24DC-SC 24 V dc Safety Relay Dual Channel With 1 Safety Contact　2904953

EN ISO 13849-1, EN 62061, IEC 61508. CE, UL, cULus, TUV. Phoenix Contact PSRmini Safety Relay. The PSRmini safety relays from Phoenix Contact are the most narrow safety relay on the market to provide proven safety thanks to force-guided contacts. The Innovative relay technology offers maximum safety and high switching loads up to 6 A. The PSR-MS with a width of just 6 mm comes with 1 to 2 enabling paths, and the PSR-MC with a width of 12 mm comes with 2 to 3 enabling paths. They are available as a single or dual channel device suitable for monitoring emergency stops, safety doors and light curtains - as well as to control actuators. Features and Benefits. Compatible with all important signal transmitters and safety-relevant systems Screw and push-in spring connection Automatic reset, Automatic/Manual reset, Automatic/Manual/Monitored reset, Manual/Monitored reset options available Up to 70% space saved Easy and quick diagnosis given means shorter downtime

Pilz

PSENcode Magnetic Safety Non-Contact Switch, Plastic, 24 V dc　541009

The safety level PLe (Cat. 4)/SIL CL 3 is only achieved if the safety outputs use 2-channel processing. EN 60947-5-3 with the actuator PSEN cs3.1 PDDB; EN 62061 SIL CL 3; EN ISO 13849-1 PLe Cat. 4; EN ISO 14119 coding level Low, Type4. CE, cULus Listed, TÜV, BG, CCC. Actuator. PSENcode Compact Non-Contact Safety Switch, Coded. The PSEN cs3.1 and PSEN cs3.1p safety switches are coded and only switch with an actuator from the PSEN cs3.1 series. There is no restriction on the number of times the actuator can be used and reset. Features and Benefits. Transponder technology for presence detection (safety function) Coded switch Dual-channel operation 2 safety inputs for series connection of multiple safety switches 2 safety outputs 1 signal output LED display for state of the actuator, state of the inputs and supply voltage/fault 1 direction of actuation IP69K protection Stock no. ; 918-6655 918-6655 has an M12 8 pole male connector Stock no. ; 918-6664 918-6664 has an M8 8 pole male connector

Pilz

Pilz PNOZ XV2 24 V dc Safety Relay Dual Channel With 2 Safety Contacts　774502

EN 60204-1, EN 62061, EN ISO 13849-1, VDE 0113-1, EN 60947-5-1. CE, cULus Listed, TÜV, KOSHA, CCC. PNOZ XV2 Safety Relay, Adjustable Time Delayed. The PNOZ XV2 range of safety relays from PILZ offers you safety and performance of a top branded safety relay all in one. The PNOZ XV2 offers you different modes of operation such as single or dual channel switches. Suitable for several different applications which are listed below. Features and benefits:. DIN rail mounted with screw terminals 2 instantaneous delay-on re-energised safety contacts LED operating voltage displayed alongside switching psitions and also the reset circuit Connections built in for safety limit switches, e-stops and more Single or dual channel operation Simple and fast wiring saving you time, effort and money long term Save costs when exchanging units (there ‘s no need to rewire therefore you should eliminate potential wiring errors). Electromechanical, potential-free. Safety features. The circuit is redundant with built-in self-monitoring. The safety function remains effective in the case of a component failure. The correct opening and closing of the safety function relays is tested automatically in each on-off cycle. International certification Faster commissioning and simple wiring through units with plug-in terminals High plant availability and short downtimes thanks to a convenient diagnostic options on the device. Applications. E-STOP pushbuttons Safety gate limit switches Reset buttons. Technical safety parameters. EN 60947-5-1 EN 60204-1 VDE 0113-1

IDEC CORPORATION

Metal bracket for SE2L Type Safety Laser Scanner　SE9Z-HS2-BK04L

IDEC CORPORATION

Connector Cable 2m SE9ZHS2BK03 and others