Global Laser

1452-04-000 Laser Module, 635nm 4mW, Continuous Wave Ellipse pattern +4 → +6 V　1452-04-000

These laser diode modules are OEM devices and conform to the emission criteria of BS (EN) 60825. It is recommended that this standard and the Data Sheet are read before these lasers are used. Serious eye damage may result if any laser of 1mW or above is pointed directly at the eye. Microblock, Compact User-adjustable Aiming Laser. Size: 30 x 10 x 15mm Ideal for portable systems Easy to mount, rugged design Zero directional pointing error User-adjustable focus Rugged vibration resistant construction

Global Laser

5001-21-000 Laser Module, 635nm 1mW, Continuous Wave Ellipse pattern +3 → +5.5 V　5001-21-000

These laser diode modules are OEM devices and conform to the emission criteria of BS (EN) 60825. It is recommended that this standard and the Data Sheet are read before these lasers are used. Serious eye damage may result if any laser of 1mW or above is pointed directly at the eye. Sigma Diode Laser Module, Compact. User focusable Ideal for experimental ; educational use Isolated brass body Size:10.4mm dia x 16.5mm Potted for better heat dissipation

Global Laser

Global Laser N Type 2.4 → 6 V dc, 60mA Laser Diode Driver　Laser Driver N Type

Evaluation Board for N-Type Laser Diodes

Scintacor

Scintacor 433111, Visualize IR Series IR Laser Alignment Card　433111

UV material maximum stimulation: 7ns, nitrogen @ 337nm 130 mW/cm2 (single pulse) IR material maximum stimulation: Nd:YAG 60MW/cm2 @ 1064nm (7ns pulse – single pulse).. Laser Alignment Detector Cards. The Visualize series from Scintacor are laser alignment tools. The range includes the standard Visualize series for detecting visible radiation, VisualizeIR series for IR radiation and UVisualize for UV radiation. Visualize products utilise a phosphor scintillator screen mounted in a black plastic, non-reflective housing. The detectors work by converting UV and IR light into visible light for laser safety. Laser alignment cards are a credit card sized tool with a 4.5cm² active area. Their compact size makes them portable and therefore ideal for checking different laser beam paths. The Visualize laser detector cards are available in UV, visible and NIR options.. Absorption bands Visualize: 400-640 nm / 800-1700 nm VisualizeIR: 790-840 nm / 870-1070 nm / 1500-1590 nm UVisualize: 250-540 nm

Global Laser

ACCULASE-PWM-650-1-S Laser Module, 650nm 1mW, Modulating, PWM control Dot pattern +4.75 → +5.25 V　ACCULASE-PWM-650-1-S

These laser diode modules are OEM devices and conform to the emission criteria of BS (EN) 60825. It is recommended that this standard and the Data Sheet are read before these lasers are used. Serious eye damage may result if any laser of 1mW or above is pointed directly at the eye. Acculase LC ; PWM Red Laser Modules. The Global Laser Acculase range of red laser diode modules offers a variety of output powers and lens options to provide a high level of optical and electrical performance. The lasers are precision set during manufacture to ensure accurate beam alignment with the outer casing of the modules making it quick and easy to get the lasers up-and-running. Two methods of output intensity control are available: LC types use a linear analogue control voltage whilst the PWM types use a digital control input to vary the duty cycle. Typical applications for the Acculase laser modules include graphics displays, alignment systems, medical applications and telemetry. High efficiency 635 or 650nm red LED laser module High pointing accuracy ; 1mRad Fitted lens provides circular/elliptical beam Internal driver circuitry 0 – 1V Linear input control voltage (LC types) 5V TTL PWM input (PWM types) Electrically isolated case Reverse polarity protected

Global Laser

Global Laser M9 Focus Key　1016-05-000

Lens Focus Adjustment Key
This spare or auxiliary lens focus adjustment tool is suitable for use with most Global Laser lens mounts. These focus keys are available in three different lens mount sizes.　; 127-1533 127-1533 • M9 x 0.5 Focus Key for Lens Mount; 127-1535 127-1535 • M11 x 0.5 Focus Key for Lens Mount; 127-1536 127-1536 • M14 x 0.7 Focus Key for Lens Mount

Global Laser

Global Laser Laser Lens　1125-375-000

Cross/Line Lens for LaserLyte-Flex
An interchangeable lens element that can convert dots projected by a LaserLyte-Flex laser into lines, crosses, or 4x4 grid lines. The wide-angle lens uses a molded multi-rod lens, and the 9 ° cross lens uses a DOE (diffractive optical element) lens. Each lens shall be; Use with 697-3557 697-3557.　We have the following lenses.　; 127-1548 127-1548

Global Laser

Global Laser Laser Lens　1125-376-000

Cross/Line Lens for LaserLyte-Flex
An interchangeable lens element that can convert dots projected by a LaserLyte-Flex laser into lines, crosses, or 4x4 grid lines. The wide-angle lens uses a molded multi-rod lens, and the 9 ° cross lens uses a DOE (diffractive optical element) lens. Each lens shall be; Use with 697-3557 697-3557.　We have the following lenses.　; 127-1548 127-1548

Global Laser

Global Laser Laser Lens　1125-377-000

Cross/Line Lens for LaserLyte-Flex
An interchangeable lens element that can convert dots projected by a LaserLyte-Flex laser into lines, crosses, or 4x4 grid lines. The wide-angle lens uses a molded multi-rod lens, and the 9 ° cross lens uses a DOE (diffractive optical element) lens. Each lens shall be; Use with 697-3557 697-3557.　We have the following lenses.　; 127-1548 127-1548

Global Laser

1549-02-000 Laser Module, 635nm 40mW, Continuous Wave, Linear & TTL control Line pattern　1549-02-000

This series of laser diode modules is an OEM device and complies with BS (EN) 60825 emission standards. It is recommended that you consult this standard and the product data sheet before using this laser. If a laser of 1 mW or more is applied directly to the eyes, serious eye problems may occur.
GuideLine 2 Alignment Laser Module

Global Laser

Laser Power Supply　5078-14-000

30 V -5 V dc converter PSU
Global Laser's inline DC-DC converter generates a stable output of 5 V dc from a 6 → 30 V dc input. Housed in a durable and compact aluminum housing, it is suitable for use with standard 24 V dc power supplies in industrial environments.

Global Laser

1250-32-000 Laser Module, 635nm 3mW, Continuous Wave Ellipse pattern +4.5 → +5.5 V　1250-32-000

Complies with BS (EN) 60825. These laser diode modules are OEM devices and conform to the emission criteria of BS (EN) 60825. It is recommended that this standard and the Data Sheet are read before these lasers are used. Serious eye damage may result if any laser of 1mW or above is pointed directly at the eye. Lens type is either Circular (C2) spot, or Elliptical (S) spot. Cameo Industrial Laser Module. Simple thread-mounted industrial laser modules. Cameo 1250 Standard Series:. Isolated metal case with M12 thread Size: 24 x 14 x 14mm User focusable Spot size: Less than 50 micron Divergence: Less than 0.5 mRad Designed for continuous cool running Wide range of focus distances JST 2-way connector. Cameo 1260 Gated Series - additional features:. TTL input facilitates rapid switching/gating Switching speeds up to 100kHz Controlled chopping minimises power consumption and extends life True ON/OFF pulsed control Low-speed enable input Low power consumption JST 4-way connector

Global Laser

1250-34-000 Laser Module, 670nm 0.8mW, Continuous Wave Ellipse pattern +4.5 → +5.5 V　1250-34-000

Complies with BS (EN) 60825. These laser diode modules are OEM devices and conform to the emission criteria of BS (EN) 60825. It is recommended that this standard and the Data Sheet are read before these lasers are used. Serious eye damage may result if any laser of 1mW or above is pointed directly at the eye. Lens type is either Circular (C2) spot, or Elliptical (S) spot. Cameo Industrial Laser Module. Simple thread-mounted industrial laser modules. Cameo 1250 Standard Series:. Isolated metal case with M12 thread Size: 24 x 14 x 14mm User focusable Spot size: Less than 50 micron Divergence: Less than 0.5 mRad Designed for continuous cool running Wide range of focus distances JST 2-way connector. Cameo 1260 Gated Series - additional features:. TTL input facilitates rapid switching/gating Switching speeds up to 100kHz Controlled chopping minimises power consumption and extends life True ON/OFF pulsed control Low-speed enable input Low power consumption JST 4-way connector

Global Laser

1250-35-000 Laser Module, 670nm 3mW, Continuous Wave Ellipse pattern +4.5 → +5.5 V　1250-35-000

Complies with BS (EN) 60825. These laser diode modules are OEM devices and conform to the emission criteria of BS (EN) 60825. It is recommended that this standard and the Data Sheet are read before these lasers are used. Serious eye damage may result if any laser of 1mW or above is pointed directly at the eye. Lens type is either Circular (C2) spot, or Elliptical (S) spot. Cameo Industrial Laser Module. Simple thread-mounted industrial laser modules. Cameo 1250 Standard Series:. Isolated metal case with M12 thread Size: 24 x 14 x 14mm User focusable Spot size: Less than 50 micron Divergence: Less than 0.5 mRad Designed for continuous cool running Wide range of focus distances JST 2-way connector. Cameo 1260 Gated Series - additional features:. TTL input facilitates rapid switching/gating Switching speeds up to 100kHz Controlled chopping minimises power consumption and extends life True ON/OFF pulsed control Low-speed enable input Low power consumption JST 4-way connector

Global Laser

1068-45-000 Laser Module, 670nm 3mW, Continuous Wave, TTL control, Dot/Line pattern -8 → -12 V　1068-45-000

These laser diode modules are OEM devices and conform to the emission criteria of BS (EN) 60825. It is recommended that this standard and the Data Sheet are read before these lasers are used. Serious eye damage may result if any laser of 1mW or above is pointed directly at the eye. Beta CW Series. The Beta CW series from Global Laser consists of high-quality continuous wave visible laser diode modules. The modules combine a laser diode, driver circuitry and collimating lens, all housed in a black powder coated brass body. The module body is electrically isolated The Beta CW laser modules also incorporate a high-quality adjustable lens. Standard units produce a highly collimated beam The visible laser spot size is adjustable by shining the beam onto a suitable target and adjusting the size with the focusing tool provided. This adjustability makes the Beta CW lasers ideal for alignment, position sensing and targeting applications. The 635 nm visible modules are 8 times brighter than 670 nm modules making them ideal for applications where visibility is important Line generator units produce a fan shaped output beam with an angle of 16°. The wide angle line generator unit produces a fan shaped output beam with an angle of 106°. The beam can be altered to produce a fine clean line using the focusing tool provided making it ideal for alignment and profile vision applications For suitable detectors, refer to the RS range of photodiodes. A replacement standard singlet lens and two types of line generator lens are available and are suitable for use with these modules

Global Laser

1452-05-000 Laser Module, 650nm 1mW, Continuous Wave Ellipse pattern +4 → +6 V　1452-05-000

These laser diode modules are OEM devices and conform to the emission criteria of BS (EN) 60825. It is recommended that this standard and the Data Sheet are read before these lasers are used. Serious eye damage may result if any laser of 1mW or above is pointed directly at the eye. Microblock, Compact User-adjustable Aiming Laser. Size: 30 x 10 x 15mm Ideal for portable systems Easy to mount, rugged design Zero directional pointing error User-adjustable focus Rugged vibration resistant construction

Global Laser

1260-02-000 Laser Module, 635nm 3mW, Modulating, TTL control Dot pattern +3 → +6 V　1260-02-000

Complies with BS (EN) 60825. These laser diode modules are OEM devices and conform to the emission criteria of BS (EN) 60825. It is recommended that this standard and the Data Sheet are read before these lasers are used. Serious eye damage may result if any laser of 1mW or above is pointed directly at the eye. Lens type is either Circular (C2) spot, or Elliptical (S) spot. Cameo Industrial Laser Module. Simple thread-mounted industrial laser modules. Cameo 1250 Standard Series:. Isolated metal case with M12 thread Size: 24 x 14 x 14mm User focusable Spot size: Less than 50 micron Divergence: Less than 0.5 mRad Designed for continuous cool running Wide range of focus distances JST 2-way connector. Cameo 1260 Gated Series - additional features:. TTL input facilitates rapid switching/gating Switching speeds up to 100kHz Controlled chopping minimises power consumption and extends life True ON/OFF pulsed control Low-speed enable input Low power consumption JST 4-way connector

Global Laser

Global Laser Eval Laser Driver Kit N Type 3.5 → 5.5 V dc, 100mA Laser Diode Driver　Eval Laser Driver Kit

Evaluation Board for Laser Diode

Global Laser

LaserLyte-Flex-635-5 Laser Module, 635nm 5mW, Flexible Dot pattern　LaserLyte-Flex-635-5

These laser diode modules are OEM devices and conform to the emission criteria of BS (EN) 60825. It is recommended that this standard and the Data Sheet are read before these lasers are used. Serious eye damage may result if any laser of 1mW or above is pointed directly at the eye. 110 – 240Vdc Power Supply: ; 697-3591 697-3591. Laserlyte Flex. This is a unique, interchangeable, laser system. The system has a range of interchangeable projections which convert the base dot laser into a line / cross / line with dot (available separately). If bought with the power supply ( ; 697-3591 697-3591 ) the LaserLyte Flex is a full plug-and-play end user alignment system. 15 x 37 mm (without line/cross optics) Housed in Black Anodised Aluminium body 6 mm to infinity Focus Range 1500 mm Cable length Laser Class 3R (127-1572 is Class 2)

Global Laser

Global Laser 60° fan angle Line shape Moulded Multi Rod Laser Lens, Exit aperture 5mm　Interchangable Line 60d

Cross and Line Optics for LaserLyte-Flex. Interchangeable lens elements which can be used to convert the dot projected by a LaserLyte-Flex Laser into a line, cross or 4x4 grid line. The wider angle optics utilise a moulded multi-rod lens; the 9° cross optic has a DOE (diffractive optical element) lens. The optics are for use with ; 697-3557 697-3557 The following optics are available: ; 127-1548 127-1548 Line Optic, 18° ; 127-1549 127-1549 Line Optic, 30° ; 697-3569 697-3569 Line Optic, 60° ; 697-3572 697-3572 Line Optic, 90° ; 697-3579 697-3579 Cross Optic, 9° ; 697-3581 697-3581 Cross Optic, 60° ; 127-1550 127-1550 Cross Optic, 100° ; 127-1547 127-1547 4x4 Grid optic

Global Laser

Global Laser 90° fan angle Line shape Moulded Multi Rod Laser Lens, Exit aperture 5mm　Interchangable Line 90d

Cross and Line Optics for LaserLyte-Flex. Interchangeable lens elements which can be used to convert the dot projected by a LaserLyte-Flex Laser into a line, cross or 4x4 grid line. The wider angle optics utilise a moulded multi-rod lens; the 9° cross optic has a DOE (diffractive optical element) lens. The optics are for use with ; 697-3557 697-3557 The following optics are available: ; 127-1548 127-1548 Line Optic, 18° ; 127-1549 127-1549 Line Optic, 30° ; 697-3569 697-3569 Line Optic, 60° ; 697-3572 697-3572 Line Optic, 90° ; 697-3579 697-3579 Cross Optic, 9° ; 697-3581 697-3581 Cross Optic, 60° ; 127-1550 127-1550 Cross Optic, 100° ; 127-1547 127-1547 4x4 Grid optic

Global Laser

Global Laser 60° fan angle Cross shape Moulded Multi Rod Laser Lens, Exit aperture 5mm　Interchangable Cross 60d

Cross and Line Optics for LaserLyte-Flex. Interchangeable lens elements which can be used to convert the dot projected by a LaserLyte-Flex Laser into a line, cross or 4x4 grid line. The wider angle optics utilise a moulded multi-rod lens; the 9° cross optic has a DOE (diffractive optical element) lens. The optics are for use with ; 697-3557 697-3557 The following optics are available: ; 127-1548 127-1548 Line Optic, 18° ; 127-1549 127-1549 Line Optic, 30° ; 697-3569 697-3569 Line Optic, 60° ; 697-3572 697-3572 Line Optic, 90° ; 697-3579 697-3579 Cross Optic, 9° ; 697-3581 697-3581 Cross Optic, 60° ; 127-1550 127-1550 Cross Optic, 100° ; 127-1547 127-1547 4x4 Grid optic

Global Laser

Global Laser 100° fan angle Line shape Rod-type Laser Lens, Exit aperture 5mm　Interchangable Long Line

Line Dot Optic. This line with dot optic will change the standard dot projection from the laser into a long line with dot. Lens Material:Glass Lens Type: Rod Lens Typical Fan Angle: 100° Typical Beam size required: 5 by 1.5 mm

Optek

Optek OPV332 Laser Diode 860Nm 1.5mW, 2-Pin T-1 package　OPV332

Optek OPV Series Surface Mount Laser. Optek OPV3 series of VCEL is vertical mounted, packaged in a TO-46 package. VCELS are highly adaptable and can be used within a wide range of sensing applications in comparison to traditional infrared LEDs. Applications include non-contact position sensing, photoelectric sensors, optical encoders ; light curtain.

Global Laser

Global Laser 11mm Adjustable Laser Mount for use with Laser Lyte Flex Laser　Heavy Duty Clamp 11mm

X2 Allen keys for adjustment. Can be used with 697-3557 ; 697-3550. Heavy Duty Mounts for Laser Modules. Heavy duty mounting clamps which allow lasers to be adjusted ; securely fixed at any required direction or angle. The base plates have a series of threaded holes which allow the clamps to be fixed directly onto a machine or workbench. ; 697-3604 697-3604 is for 11 mm diameter laser modules such as the LaserLyte Flex ; 127-1551 127-1551 is for M18 threaded laser modules such as the GuideLine 2

ROHM

Laser Diode 3 Pin Red　RLD65PZX2-01A

ROHM

Laser Diode 3 Pin Red　RLD65NZX2-00A

ROHM

Laser Diode 3 Pin Red　RLD63NPC5-00A

ROHM's 635 nm red laser diode is mainly used in sensors, line markers and ranges. Single-mode industry standard φ 5.6 metal stem

ROHM

laser diode 3-pin infrared　RLD84NZJ2-00A

ROHM

laser diode 3-pin infrared　RLD82PZJ1-00A

ROHM

laser diode 3-pin infrared　RLD84PZJ2-00A

ROHM

laser diode 3-pin infrared　RLD85NZJ4-00A

ROHM

Laser Diode 3 Pin Red　RLD65MZT7-00A

ROHM's 660 nm red laser diode offers a wide range of outputs to meet a variety of needs. Single-mode industry standard φ 5.6 metal stem

ROHM

laser diode 3-pin infrared　RLD78NZM7-00A

ROHM's 780 nm invisible laser diode is commonly used in sensors and laser printers. Single-mode industry standard φ 5.6 metal stem

ROHM

Laser Diode 3 Pin Red　RLD63NPC7-00A

ROHM's 635 nm red laser diode is mainly used in sensors, line markers and ranges. Single-mode industry standard φ 5.6 metal stem

ROHM

laser diode 3-pin infrared　RLD78MZM7-00A

ROHM's 780 nm invisible laser diode is commonly used in sensors and laser printers. Single-mode industry standard φ 5.6 metal stem

ROHM

Laser Diode 3 Pin Red　RLD65NZX1-00A

ROHM

Laser Diode 3 Pin Red　RLD63NPC8-00A

ROHM's 635 nm red laser diode is mainly used in sensors, line markers and ranges. Single-mode industry standard φ 5.6 metal stem

ROHM

Laser Diode 3 Pin Red　RLD63NPC6-00A

ROHM's 635 nm red laser diode is mainly used in sensors, line markers and ranges. Single-mode industry standard φ 5.6 metal stem

ROHM

laser diode 3-pin infrared　RLD78PZM7-00A

ROHM's 780 nm invisible laser diode is commonly used in sensors and laser printers. Single-mode industry standard φ 5.6 metal stem