Schneider Electric

LED Reflecting Lamp Rated Voltage: 48 V and others

Schneider Electric

LED Lamp Rated Voltage: 6 V dc 1 Bag (10 Pieces)　DL1CD0063

BA9s based Schneider Electrics LED bulbs illuminate green at 6 V/1.2 W.
specially designed Small size

Schneider Electric

LED Lamp Rated Voltage: 110/230V 1 Bag (5 Pieces)　ZB6YG095

Schneider Electric

Indicator Lens Red Bullet Type 22 mm 1 Bag (10 Pieces)　ZBV0143

The Red lens cap on this Schneider Electric Harmony ZB is round.
Compatible with Harmony XB4/XB5 pilot lights with built-in LED.

Broadcom

Broadcom HLMP-7000-D0010, Red Right Angle PCB LED Indicator, Through Hole 3 V　HLMP-7000-D0010

Avago HLMP-P/Q/6/70 Series Subminiature LEDs. The HLMP-P/Q/6/70 series, from Avago Technologies, are subminiature LED lamps. They are available in both flat top and dome package options This group of LEDs are in a black plastic right-angle housing. At 3.54mm wide, the packages can be side stacked for optimisation of board space saving. With the right-angle housing, the HLMP-P/Q/6/70 LEDs are ideal for use as back panel diagnostic indicators and logic status indicators on PC boards. HLMP-Pxxx This series of flat top LEDs have an untinted, non-diffused lens. They offer a wide radiation pattern that is suitable for backlighting applications. They are also ideal for use in light pipe applications. HLMP-6xxx This series consists of dome lamps which have a tinted and diffused lens. They offer a wide viewing angle alongisde a high on-off contrast ratio and are ideal for use as indicators. The high brightness lamps have an untinted and non-diffused lens which provides a higher luminous intensity with a narrow radiation pattern.. Features of the HLMP-P/Q/6/70 LEDs: - Subminiature flat top and dome package options - Variety of colours available - Suitable for applications where space is limited - Axial leads

Broadcom

Broadcom HLMP-3507-D00B2, Green Right Angle PCB LED Indicator, Through Hole 2.7 V　HLMP-3507-D00B2

Avago HLMP-3301/3401/3507/3762/3862/3962/D401 Series LEDs in Right Angle Housing. This family of LEDs are T-1 3/4 (5mm) diffused LED lamps. They are ideal for general purpose indicator applications. Their high light output and wide viewing angle is made possible by their diffusants, tints and optical design. Each colour options has a variety of intensities which increases flexibility in design. A black plastic right-angle housing with the 5mm LEDs makes these ideal for indicator applications. The LEDs are pre-bent for through-hole mounting. The housing can withstand temperatures up to 150°C. This range of LEDs includes HLMP-3301, HLMP-3401, HLMP-3507, HLMP-3762, HLMP-3862, HLMP-3962 and HLMP-D401.. Features of the HLMP-3301/3401/3507/3762/3862/3962/D401 LEDs: - High intensity - Variety of colour options - Standard T-1 3/4 (5mm) packages - Selected minimum intensities - Wide viewing angle - General purpose leads - Reliable and rugged

Kingbright

Kingbright KM2520EH/1SGD, Green Right Angle PCB LED Indicator, Through Hole 2.5 V　KM2520EH/1SGD

Kingbright 2520 Subminiature LED Indicators. The 2520 PCB LED indicators, from Kingbright, are available in single and quad block packages. They consist of subminiature LEDs within a black plastic housing. The housing holds the LEDs in place, at a right angle to the board.. Features of the 2520 PCB LED indicators: Subminiature LEDs Variety of colours Through-hole mounting Black plastic housing, right angle High-contrast UL 94 V-0 rated Diffused lens

Kingbright

Kingbright L-4060VH/2ID, Red Right Angle PCB LED Indicator, 2 LEDs, Through Hole 2.5 V　L-4060VH/2ID

Kingbright 4060 Subminiature LED Indicators. The 4060 family, from Kingbright, are PCB LED indicators. They consist of subminiature LEDs within a black plastic housing. The housing positions the LEDs at a right angle to the board whilst providing a high contrast with the LED.. Features of the 4060 LED indicators: Multi level stacked Black plastic housing Right angle Through-hole mounting Wide viewing angle High reliability

Kingbright

Kingbright L-4060VH/2GD, Green Right Angle PCB LED Indicator, 2 LEDs, Through Hole 2.5 V　L-4060VH/2GD

Kingbright 4060 Subminiature LED Indicators. The 4060 family, from Kingbright, are PCB LED indicators. They consist of subminiature LEDs within a black plastic housing. The housing positions the LEDs at a right angle to the board whilst providing a high contrast with the LED.. Features of the 4060 LED indicators: Multi level stacked Black plastic housing Right angle Through-hole mounting Wide viewing angle High reliability

Kingbright

Kingbright L-93A8CB/1ID, Red Right Angle PCB LED Indicator, Through Hole 2.5 V　L-93A8CB/1ID

Kingbright 3mm Single-Level LED Indicators - Single Block. This family of PCB LED indicators, from Kingbright, are right angle LED indicators. They consist of a 3mm (T-1) through-hole LED within a black plastic housing. The LEDs are available in a variety of colours which are enhanced by their black packages.. Single PCB LED indicators 1 x 3mm (T-1) LED Variety of colours Black plastic housing Right angled IC compatible Wide viewing angle High reliability

Kingbright

Kingbright L-93A8CB/1GD, Green Right Angle PCB LED Indicator, Through Hole 2.5 V　L-93A8CB/1GD

Kingbright 3mm Single-Level LED Indicators - Single Block. This family of PCB LED indicators, from Kingbright, are right angle LED indicators. They consist of a 3mm (T-1) through-hole LED within a black plastic housing. The LEDs are available in a variety of colours which are enhanced by their black packages.. Single PCB LED indicators 1 x 3mm (T-1) LED Variety of colours Black plastic housing Right angled IC compatible Wide viewing angle High reliability

Kingbright

Kingbright L-93A8CB/1YD, Yellow Right Angle PCB LED Indicator, Through Hole 2.5 V　L-93A8CB/1YD

Kingbright 3mm Single-Level LED Indicators - Single Block. This family of PCB LED indicators, from Kingbright, are right angle LED indicators. They consist of a 3mm (T-1) through-hole LED within a black plastic housing. The LEDs are available in a variety of colours which are enhanced by their black packages.. Single PCB LED indicators 1 x 3mm (T-1) LED Variety of colours Black plastic housing Right angled IC compatible Wide viewing angle High reliability

Kingbright

Kingbright L-93A8EB/2ID, Red Right Angle PCB LED Indicator, 2 LEDs, Through Hole 2.5 V　L-93A8EB/2ID

Kingbright 3mm Bi-Level LED Indicators. This family of PCB LED indicators, from Kingbright, are 3mm (T-1) bi-level indicators. They consist of through hole LEDs within a black plastic housing. The housing holds the LEDs at a right angle to the board. Their bi-level mounting ensure optimisation of board space. Features of the 3mm bi-level indicators: 3mm (T-1) through-hole LEDs Black plastic housing Right angled Variety of colours Wide viewing angle High reliability

Kingbright

Kingbright L-93A8EB/2GD, Green Right Angle PCB LED Indicator, 2 LEDs, Through Hole 2.5 V　L-93A8EB/2GD

Kingbright 3mm Bi-Level LED Indicators. This family of PCB LED indicators, from Kingbright, are 3mm (T-1) bi-level indicators. They consist of through hole LEDs within a black plastic housing. The housing holds the LEDs at a right angle to the board. Their bi-level mounting ensure optimisation of board space. Features of the 3mm bi-level indicators: 3mm (T-1) through-hole LEDs Black plastic housing Right angled Variety of colours Wide viewing angle High reliability

Kingbright

Kingbright L-1503CB/1ID, Red Right Angle PCB LED Indicator, Through Hole 2.5 V　L-1503CB/1ID

Kingbright 5mm Single-Level LED Indicators - Single Block. These single level PCB LED indicators, from Kingbright, consist of a 5mm (T-1 3/4) through-hole LED within a black plastic housing. The housings hold the LED at a right angle to the board whilst providing a high contrast ratio to the LED. The LED indicators are available in a variety of single colour and bi colour options.. Features of the single level PCB LED indicators: 5mm through hole LED Black plastic housing Right angle Variety of colours

Kingbright

Kingbright L-1503CB/1GD, Green Right Angle PCB LED Indicator, Through Hole 2.5 V　L-1503CB/1GD

Kingbright 5mm Single-Level LED Indicators - Single Block. These single level PCB LED indicators, from Kingbright, consist of a 5mm (T-1 3/4) through-hole LED within a black plastic housing. The housings hold the LED at a right angle to the board whilst providing a high contrast ratio to the LED. The LED indicators are available in a variety of single colour and bi colour options.. Features of the single level PCB LED indicators: 5mm through hole LED Black plastic housing Right angle Variety of colours

Kingbright

Kingbright L-130WDT/1EGW, Green & Red Right Angle PCB LED Indicator, Through Hole 2.5 V　L-130WDT/1EGW

Kingbright 3mm Single-Level LED Indicators - Single Block. This family of PCB LED indicators, from Kingbright, are right angle LED indicators. They consist of a 3mm (T-1) through-hole LED within a black plastic housing. The LEDs are available in a variety of colours which are enhanced by their black packages.. Single PCB LED indicators 1 x 3mm (T-1) LED Variety of colours Black plastic housing Right angled IC compatible Wide viewing angle High reliability

Kingbright

Kingbright L-130WCP/2EGW, Green & Red Right Angle PCB LED Indicator, 2 LEDs, Through Hole 2.5 V　L-130WCP/2EGW

Kingbright 3mm Bi-Level LED Indicators. This family of PCB LED indicators, from Kingbright, are 3mm (T-1) bi-level indicators. They consist of through hole LEDs within a black plastic housing. The housing holds the LEDs at a right angle to the board. Their bi-level mounting ensure optimisation of board space. Features of the 3mm bi-level indicators: 3mm (T-1) through-hole LEDs Black plastic housing Right angled Variety of colours Wide viewing angle High reliability

Kingbright

Kingbright L-59BL/1EGW, Green & Red Right Angle PCB LED Indicator, Through Hole 2.5 V　L-59BL/1EGW

Kingbright 5mm Single-Level LED Indicators - Single Block. These single level PCB LED indicators, from Kingbright, consist of a 5mm (T-1 3/4) through-hole LED within a black plastic housing. The housings hold the LED at a right angle to the board whilst providing a high contrast ratio to the LED. The LED indicators are available in a variety of single colour and bi colour options.. Features of the single level PCB LED indicators: 5mm through hole LED Black plastic housing Right angle Variety of colours

Dialight

Dialight 551-0607F, Green Right Angle PCB LED Indicator, Through Hole 7.5 V　551-0607F

Dialight 551-xx07 Series LED CBI® Circuit Board Indicators. Dialight's 551-xx07 series are a family of LED CBI® circuit board indicators. The consist of one 3mm (T-1) LED in a black plastic housing with a high centreline of 4.45mm. The black housing offers a high contrast whilst holding the LED at a right angle. They have 2 pins for through-hole mounting. The 551-xx07 PCB LED indicators are available in high efficiency, integral resistor, low current and bi-colour LED options.. Features of the 551-xx07 PCB LED indicators: 3mm through hole LEDs Variety of colours Right angle black housing Compatible with 551-xx07-004 QuadBlock

Dialight

Dialight 551-1307F, Green Right Angle PCB LED Indicator, Through Hole 1.9 V　551-1307F

Dialight 551-xx07 Series LED CBI® Circuit Board Indicators. Dialight's 551-xx07 series are a family of LED CBI® circuit board indicators. The consist of one 3mm (T-1) LED in a black plastic housing with a high centreline of 4.45mm. The black housing offers a high contrast whilst holding the LED at a right angle. They have 2 pins for through-hole mounting. The 551-xx07 PCB LED indicators are available in high efficiency, integral resistor, low current and bi-colour LED options.. Features of the 551-xx07 PCB LED indicators: 3mm through hole LEDs Variety of colours Right angle black housing Compatible with 551-xx07-004 QuadBlock

Dialight

Dialight 551-1207F, Yellow Right Angle PCB LED Indicator, Through Hole 1.8 V　551-1207F

Dialight 551-xx07 Series LED CBI® Circuit Board Indicators. Dialight's 551-xx07 series are a family of LED CBI® circuit board indicators. The consist of one 3mm (T-1) LED in a black plastic housing with a high centreline of 4.45mm. The black housing offers a high contrast whilst holding the LED at a right angle. They have 2 pins for through-hole mounting. The 551-xx07 PCB LED indicators are available in high efficiency, integral resistor, low current and bi-colour LED options.. Features of the 551-xx07 PCB LED indicators: 3mm through hole LEDs Variety of colours Right angle black housing Compatible with 551-xx07-004 QuadBlock

Dialight

Dialight 551-0407F, Red Right Angle PCB LED Indicator, Through Hole 2 V　551-0407F

Dialight 551-xx07 Series LED CBI® Circuit Board Indicators. Dialight's 551-xx07 series are a family of LED CBI® circuit board indicators. The consist of one 3mm (T-1) LED in a black plastic housing with a high centreline of 4.45mm. The black housing offers a high contrast whilst holding the LED at a right angle. They have 2 pins for through-hole mounting. The 551-xx07 PCB LED indicators are available in high efficiency, integral resistor, low current and bi-colour LED options.. Features of the 551-xx07 PCB LED indicators: 3mm through hole LEDs Variety of colours Right angle black housing Compatible with 551-xx07-004 QuadBlock

Dialight

Dialight 551-0307F, Yellow Right Angle PCB LED Indicator, Through Hole 2.1 V　551-0307F

Dialight 551-xx07 Series LED CBI® Circuit Board Indicators. Dialight's 551-xx07 series are a family of LED CBI® circuit board indicators. The consist of one 3mm (T-1) LED in a black plastic housing with a high centreline of 4.45mm. The black housing offers a high contrast whilst holding the LED at a right angle. They have 2 pins for through-hole mounting. The 551-xx07 PCB LED indicators are available in high efficiency, integral resistor, low current and bi-colour LED options.. Features of the 551-xx07 PCB LED indicators: 3mm through hole LEDs Variety of colours Right angle black housing Compatible with 551-xx07-004 QuadBlock

Dialight

Dialight 553-0111F, Red Right Angle PCB LED Indicator, 2 LEDs, Through Hole 3 V　553-0111F

Dialight 553-xxxx Series LED CBI® Circuit Board Indicators. The 553-xxxx series, from Dialight, are PCB LED indicators. They are a part of Dialight's CBI® circuit board indicator family. The 553-xxxx consist of two 3mm (T-1) LEDs with a right-angle black plastic housing. The black package also offers a high contrast to the LED light. The 553-xxxx family are bi-level indicators with through-hole mounting. Their bi-level design makes them ideal for space concious board applications. The 553-xxxx has high efficiency, low current, resistor, bi-colour and non-diffused LED options.. Features of the 553-xxxx PCB LED indicators: 2 x 3mm (T-1) LEDs Bi-level black plastic housing Right angle package Variety of LED colours High reliability Vibration and shock resistant

Dialight

Dialight 553-0133F, Yellow Right Angle PCB LED Indicator, 2 LEDs, Through Hole 3 V　553-0133F

Dialight 553-xxxx Series LED CBI® Circuit Board Indicators. The 553-xxxx series, from Dialight, are PCB LED indicators. They are a part of Dialight's CBI® circuit board indicator family. The 553-xxxx consist of two 3mm (T-1) LEDs with a right-angle black plastic housing. The black package also offers a high contrast to the LED light. The 553-xxxx family are bi-level indicators with through-hole mounting. Their bi-level design makes them ideal for space concious board applications. The 553-xxxx has high efficiency, low current, resistor, bi-colour and non-diffused LED options.. Features of the 553-xxxx PCB LED indicators: 2 x 3mm (T-1) LEDs Bi-level black plastic housing Right angle package Variety of LED colours High reliability Vibration and shock resistant

Dialight

Dialight 553-0112F, Green & Red Right Angle PCB LED Indicator, 2 LEDs, Through Hole 3 V　553-0112F

Dialight 553-xxxx Series LED CBI® Circuit Board Indicators. The 553-xxxx series, from Dialight, are PCB LED indicators. They are a part of Dialight's CBI® circuit board indicator family. The 553-xxxx consist of two 3mm (T-1) LEDs with a right-angle black plastic housing. The black package also offers a high contrast to the LED light. The 553-xxxx family are bi-level indicators with through-hole mounting. Their bi-level design makes them ideal for space concious board applications. The 553-xxxx has high efficiency, low current, resistor, bi-colour and non-diffused LED options.. Features of the 553-xxxx PCB LED indicators: 2 x 3mm (T-1) LEDs Bi-level black plastic housing Right angle package Variety of LED colours High reliability Vibration and shock resistant

Dialight

Dialight 553-0212F, Green & Red Right Angle PCB LED Indicator, 2 LEDs, Through Hole 2.2 V　553-0212F

Dialight 553-xxxx Series LED CBI® Circuit Board Indicators. The 553-xxxx series, from Dialight, are PCB LED indicators. They are a part of Dialight's CBI® circuit board indicator family. The 553-xxxx consist of two 3mm (T-1) LEDs with a right-angle black plastic housing. The black package also offers a high contrast to the LED light. The 553-xxxx family are bi-level indicators with through-hole mounting. Their bi-level design makes them ideal for space concious board applications. The 553-xxxx has high efficiency, low current, resistor, bi-colour and non-diffused LED options.. Features of the 553-xxxx PCB LED indicators: 2 x 3mm (T-1) LEDs Bi-level black plastic housing Right angle package Variety of LED colours High reliability Vibration and shock resistant

Dialight

Dialight 550-2407F, Red Right Angle PCB LED Indicator, Through Hole 2.5 V　550-2407F

Dialight 550-xx07 Series LED CBI® Circuit Board Indicators. The 550-xx07, from Dialight, are LED circuit board indicators from their CBI® family. They contain one 5mm through-hole LED in a black plastic housing with a sloped back. Their black housings enable a high contrast and housing standoffs help with the cleaning of the PCB. They are available in general purpose, integral resistor, low current, high efficiency, bi-colour and super bright LED options.. Features of the 550-xx07 PCB LED indicators: 1 x 5mm LED Through-hole mounting Variety of colour options Black plastic housing Sloped back with standoffs Compatible with 550-xx07 dual block and 550-xx07-004 quad block

Dialight

Dialight 550-2307F, Yellow Right Angle PCB LED Indicator, Through Hole 2.6 V　550-2307F

Dialight 550-xx07 Series LED CBI® Circuit Board Indicators. The 550-xx07, from Dialight, are LED circuit board indicators from their CBI® family. They contain one 5mm through-hole LED in a black plastic housing with a sloped back. Their black housings enable a high contrast and housing standoffs help with the cleaning of the PCB. They are available in general purpose, integral resistor, low current, high efficiency, bi-colour and super bright LED options.. Features of the 550-xx07 PCB LED indicators: 1 x 5mm LED Through-hole mounting Variety of colour options Black plastic housing Sloped back with standoffs Compatible with 550-xx07 dual block and 550-xx07-004 quad block

Dialight

Dialight 553-0222-200F, Green Right Angle PCB LED Indicator, 2 LEDs, Through Hole 2.2 V　553-0222-200F

Dialight 553-xxxx-200 Series LED CBI® Circuit Board Indicators. The 553-xxxx-200 series, from Dialight, are LED CBI® circuit board indicators. These bi-level PCB LED indicators contain two 3mm (T-1) LEDs in a black plastic housing. The right-angle housings are black which offers a high contrast and are narrow to fit applications where space is limited. The 553-xxxx-200 PCB LED indicators have high efficiency, low current, resistor, bi-colour and non-diffused LED options.. Features of the 553-xxxx-200 PCB LED indicators: Through hole mounting 2 x 3mm (T-1) LEDs Variety of colours Black plastic housing Right-angle Designed to accommodate DIN 41494 Multiple CBIs form horizontal LED arrays on 5.08mm (0.2in) centre-lines High-contrast, UL 94V-0 rated, black housing Housing stand-offs facilitate PCB cleaning Solderability per MIL-STD-202F, method 208F

Dialight

Dialight 553-0233-200F, Yellow Right Angle PCB LED Indicator, 2 LEDs, Through Hole 2.4 V　553-0233-200F

Dialight 553-xxxx-200 Series LED CBI® Circuit Board Indicators. The 553-xxxx-200 series, from Dialight, are LED CBI® circuit board indicators. These bi-level PCB LED indicators contain two 3mm (T-1) LEDs in a black plastic housing. The right-angle housings are black which offers a high contrast and are narrow to fit applications where space is limited. The 553-xxxx-200 PCB LED indicators have high efficiency, low current, resistor, bi-colour and non-diffused LED options.. Features of the 553-xxxx-200 PCB LED indicators: Through hole mounting 2 x 3mm (T-1) LEDs Variety of colours Black plastic housing Right-angle Designed to accommodate DIN 41494 Multiple CBIs form horizontal LED arrays on 5.08mm (0.2in) centre-lines High-contrast, UL 94V-0 rated, black housing Housing stand-offs facilitate PCB cleaning Solderability per MIL-STD-202F, method 208F

Dialight

Dialight 553-0211F, Red Right Angle PCB LED Indicator, 2 LEDs, Through Hole 2.2 V　553-0211F

Dialight 553-xxxx Series LED CBI® Circuit Board Indicators. The 553-xxxx series, from Dialight, are PCB LED indicators. They are a part of Dialight's CBI® circuit board indicator family. The 553-xxxx consist of two 3mm (T-1) LEDs with a right-angle black plastic housing. The black package also offers a high contrast to the LED light. The 553-xxxx family are bi-level indicators with through-hole mounting. Their bi-level design makes them ideal for space concious board applications. The 553-xxxx has high efficiency, low current, resistor, bi-colour and non-diffused LED options.. Features of the 553-xxxx PCB LED indicators: 2 x 3mm (T-1) LEDs Bi-level black plastic housing Right angle package Variety of LED colours High reliability Vibration and shock resistant

Dialight

Dialight 553-0222F, Green Right Angle PCB LED Indicator, 2 LEDs, Through Hole 2.2 V　553-0222F

Dialight 553-xxxx Series LED CBI® Circuit Board Indicators. The 553-xxxx series, from Dialight, are PCB LED indicators. They are a part of Dialight's CBI® circuit board indicator family. The 553-xxxx consist of two 3mm (T-1) LEDs with a right-angle black plastic housing. The black package also offers a high contrast to the LED light. The 553-xxxx family are bi-level indicators with through-hole mounting. Their bi-level design makes them ideal for space concious board applications. The 553-xxxx has high efficiency, low current, resistor, bi-colour and non-diffused LED options.. Features of the 553-xxxx PCB LED indicators: 2 x 3mm (T-1) LEDs Bi-level black plastic housing Right angle package Variety of LED colours High reliability Vibration and shock resistant

Dialight

Dialight 553-0122-200F, Green Right Angle PCB LED Indicator, 2 LEDs, Through Hole 2.8 V　553-0122-200F

Dialight 553-xxxx-200 Series LED CBI® Circuit Board Indicators. The 553-xxxx-200 series, from Dialight, are LED CBI® circuit board indicators. These bi-level PCB LED indicators contain two 3mm (T-1) LEDs in a black plastic housing. The right-angle housings are black which offers a high contrast and are narrow to fit applications where space is limited. The 553-xxxx-200 PCB LED indicators have high efficiency, low current, resistor, bi-colour and non-diffused LED options.. Features of the 553-xxxx-200 PCB LED indicators: Through hole mounting 2 x 3mm (T-1) LEDs Variety of colours Black plastic housing Right-angle Designed to accommodate DIN 41494 Multiple CBIs form horizontal LED arrays on 5.08mm (0.2in) centre-lines High-contrast, UL 94V-0 rated, black housing Housing stand-offs facilitate PCB cleaning Solderability per MIL-STD-202F, method 208F

Dialight

Dialight 553-0133-200F, Yellow Right Angle PCB LED Indicator, 2 LEDs, Through Hole 2.8 V　553-0133-200F

Dialight 553-xxxx-200 Series LED CBI® Circuit Board Indicators. The 553-xxxx-200 series, from Dialight, are LED CBI® circuit board indicators. These bi-level PCB LED indicators contain two 3mm (T-1) LEDs in a black plastic housing. The right-angle housings are black which offers a high contrast and are narrow to fit applications where space is limited. The 553-xxxx-200 PCB LED indicators have high efficiency, low current, resistor, bi-colour and non-diffused LED options.. Features of the 553-xxxx-200 PCB LED indicators: Through hole mounting 2 x 3mm (T-1) LEDs Variety of colours Black plastic housing Right-angle Designed to accommodate DIN 41494 Multiple CBIs form horizontal LED arrays on 5.08mm (0.2in) centre-lines High-contrast, UL 94V-0 rated, black housing Housing stand-offs facilitate PCB cleaning Solderability per MIL-STD-202F, method 208F

Dialight

Dialight 553-0112-200F, Green & Red Right Angle PCB LED Indicator, 2 LEDs, Through Hole 2.8 V　553-0112-200F

Dialight 553-xxxx-200 Series LED CBI® Circuit Board Indicators. The 553-xxxx-200 series, from Dialight, are LED CBI® circuit board indicators. These bi-level PCB LED indicators contain two 3mm (T-1) LEDs in a black plastic housing. The right-angle housings are black which offers a high contrast and are narrow to fit applications where space is limited. The 553-xxxx-200 PCB LED indicators have high efficiency, low current, resistor, bi-colour and non-diffused LED options.. Features of the 553-xxxx-200 PCB LED indicators: Through hole mounting 2 x 3mm (T-1) LEDs Variety of colours Black plastic housing Right-angle Designed to accommodate DIN 41494 Multiple CBIs form horizontal LED arrays on 5.08mm (0.2in) centre-lines High-contrast, UL 94V-0 rated, black housing Housing stand-offs facilitate PCB cleaning Solderability per MIL-STD-202F, method 208F

Dialight

Dialight 570-0100-132F, Red/Yellow/Green Right Angle PCB LED Indicator, 3 LEDs, Through Hole 2.5 V　570-0100-132F

Dialight 570-0100 Series LED CBI® Circuit Board Indicators. The 570-0100 series, from Dialight, are tri-level PCB LED indicators. They are a part of Dialight's CBI® circuit board indicator family. The 570-0100 consists of three 2mm (T-3/4) LEDs within a black plastic housing. The housing holds the LEDs at a right angle whilst providing a high contrast between them. The 570-0100 comes in a variety of red, yellow and green colour combinations.. Features of the 570-0100 PCB LED indicators: Tri-level (3 LEDs high) Through-hole mounting Black plastic housing right angle DIN 41494 compatible

Dialight

Dialight 555-4001F, Red Right Angle PCB LED Indicator, 4 LEDs, Through Hole 2 V　555-4001F

Dialight 555-4 Series LED CBI® Circuit Board Indicators. The 555-4xxx series, from Dialight, are quad LED CBI® circuit board indicators. These PCB LED indicators contain four 2mm (T-3/4) LEDs within a black plastic housing. The housing sits the LEDs at a right angle to the board whilst providing a high contrast between itself and the LED. The 555-4xxx is available with general purpose and integral resistor LED types.. Features of the 555-4xxx PCB LED indicators: 4 x 2mm (T-3/4) LEDs Variety of colours Black plastic housing Right angle Through-hole mounting Compatible with 555-2xxx Single Block

Dialight

Dialight 555-2301F, Green Right Angle PCB LED Indicator, Through Hole 3 V　555-2301F

Dialight 555-2 Series LED CBI® Circuit Board Indicators. The 555-2xxx series, from Dialight, are PCB LED indicators from their CBI® circuit board indicator family. They contain one 2mm (T-3/4) LED in a black plastic housing. The housing positions the LED at a right angle to the PCB. The 555-2xxx is available in general purpose and integral resistor LED options.. Features of the 555-2xxx PCB LED indicators: Through-hole mounting 1 x 2mm (T-3/4) LED Black plastic housing Right angle Variety of colours High contrast between LED and housing Compatible with 555-4xxx Quad Block