[Optek] AllProducts
Lab Instruments & Supplies
-
Electronic/Electrical Parts and Controll Equipments
-
Optek, OPI 1264B DC Input Transistor Output Optocoupler, Through Hole, 4-Pin OPI 1264B
Photocoupler, Transistor Output, 10kV ; 50kV, Optek. Range of optoelectronic isolators. Phototransistor output Axial leads Operating Temperature -40°C to +80°C
1 products found
JPY: 760
USD: 4.73
-
OPB815L Optek, Screw Mount Slotted Optical Switch, Phototransistor Output OPB815L
OPB815L and OPB815WZ Series Slotted Optical Switches
1 products found
JPY: 750
USD: 4.67
-
Optek OP293B, 890nm IR LED, 5mm (T-1 3/4) Through Hole package OP293B
Optek OP293 and OP298 Series IREDs. The OP293 and OP298 series, from Optek Technology, are Infrared (IR) emitting diodes. They are in plastic TO-46 hermetic packages with through-hole mounting. The OP293 series has a wide irradiance pattern and the OP298 series has a narrow beam pattern. They come in a variety of power ranges with a high power output.. Features of the OP293 and OP298 series IREDs: TO-46 through-hole package High power output Wavelength: 890nm
1 products found
JPY: 210
USD: 1.31
-
Optek OP593B IR Phototransistor, Through Hole 2-Pin TO-18 package OP593B
OP593 and OP598 Series Phototransistors. The OP593 and OP598 series, from Optek Technology Inc., are a family of NPN silicon phototransistors. They are in dark blue plastic TO-18 equivalent packages. They offer a wide receiving angle in a variety of different sensitivity ranges.. Features of the OP593 and OP598 phototransistors: Through-hole mounting TO-18 equivalent package Dark blue lens Wide receiving angle Operating temperature: -40 to +100 °C
1 products found
JPY: 210
USD: 1.31
-
OPB702 Optek, Through Hole Reflective Sensor, Phototransistor Output OPB702
OPB700/701/702 Reflective Object Sensors. OPB700 and OPB700ALZ series of sensors from Optek consist of an infrared emitting diode and an NPN silicon phototransistor, mounted side-by-side on converging optical axes in a black plastic housing. OPB701 and OPB701ALZ sensors consist of an infrared emitting diode and an NPN silicon photodarlington, and also mounted side-by-side on converging optical axes in a cost-effective black plastic housing. The interconnect wires for these devices are UL approved #26 AWG, with Teflon insulation, stripped ; tinned. The OPB700 and OPB701 have 4" (101 mm) wire length while the OPB700ALZ ; OPB701ALZ have 18" (457 mm) wire length.
1 products found
JPY: 20,400
USD: 126.93
-
OPB702 Optek, Through Hole Reflective Sensor, Phototransistor Output OPB702
OPB700/701/702 Reflective Object Sensors. OPB700 and OPB700ALZ series of sensors from Optek consist of an infrared emitting diode and an NPN silicon phototransistor, mounted side-by-side on converging optical axes in a black plastic housing. OPB701 and OPB701ALZ sensors consist of an infrared emitting diode and an NPN silicon photodarlington, and also mounted side-by-side on converging optical axes in a cost-effective black plastic housing. The interconnect wires for these devices are UL approved #26 AWG, with Teflon insulation, stripped ; tinned. The OPB700 and OPB701 have 4" (101 mm) wire length while the OPB700ALZ ; OPB701ALZ have 18" (457 mm) wire length.
1 products found
JPY: 830
USD: 5.16
-
OP232 Optek, 890nm IR LED, TO-46 Through Hole package OP232
Optek OP230/1/2/3 Series IREDs. The OP230, OP231, OP232 and OP233 series, from Optek Technology, are Infrared (IR) emitting diodes. They are in a TO-46 hermetically sealed package which enables high power dissipation. The TO-46 package also enables operation in hostile environments. These high intensity GaAs IR emitting diodes offer a narrow beam angle. This makes the OP230/1/2/3 series ideal for beam interruption applications.. Features of the OP230/1/2/3 series: TO-46 hermetically sealed package Narrow beam angle Operating temperature: -65°C to +125°C
1 products found
JPY: 429,000
USD: 2,669.24
-
OPB720A-06Z Optek, Screw Mount Reflective Sensor, Open Collector Output OPB720A-06Z
OPB720A and OPB720B Long Range Reflective Switch. The OPB720 Series has a logical output that switches from a high level with a reflective target, to a low level with no reflective target. With the addition of hysteresis, the sensor minimises switching oscillations on the output. The sensor distance that can be achieved is very dependent on the type of material used for the target. Recognises objects as small as 2mm Can be used in either reflective or interruptive mode Ambient light rejection of ;100k Lux TTL/CMOS compatible Cable length: 990mm Size: 27.94 x 8.38 x 17.15mm Applications: conveyer-belt package recognition, personnel movement recognition, near-focus security systems, wash and soap dispensing stations and product dispensing services
1 products found
JPY: 111,000
USD: 690.64
-
OPB720B-30VZ Optek, Reflective Sensor, Open Collector Output OPB720B-30VZ
OPB720A and OPB720B Long Range Reflective Switch. The OPB720 Series has a logical output that switches from a high level with a reflective target, to a low level with no reflective target. With the addition of hysteresis, the sensor minimises switching oscillations on the output. The sensor distance that can be achieved is very dependent on the type of material used for the target. Recognises objects as small as 2mm Can be used in either reflective or interruptive mode Ambient light rejection of ;100k Lux TTL/CMOS compatible Cable length: 990mm Size: 27.94 x 8.38 x 17.15mm Applications: conveyer-belt package recognition, personnel movement recognition, near-focus security systems, wash and soap dispensing stations and product dispensing services
1 products found
JPY: 155,000
USD: 964.41
-
OPB720B-06Z Optek, Reflective Sensor, Open Collector Output OPB720B-06Z
OPB720A and OPB720B Long Range Reflective Switch. The OPB720 Series has a logical output that switches from a high level with a reflective target, to a low level with no reflective target. With the addition of hysteresis, the sensor minimises switching oscillations on the output. The sensor distance that can be achieved is very dependent on the type of material used for the target. Recognises objects as small as 2mm Can be used in either reflective or interruptive mode Ambient light rejection of ;100k Lux TTL/CMOS compatible Cable length: 990mm Size: 27.94 x 8.38 x 17.15mm Applications: conveyer-belt package recognition, personnel movement recognition, near-focus security systems, wash and soap dispensing stations and product dispensing services
1 products found
JPY: 112,000
USD: 696.86
-
OPB680 Optek, Through Hole Slotted Optical Switch, Phototransistor Output OPB680
OPB680 Series Slotted Optical Switches. The OPB680 slotted optical flag switches, from Optek Technology, are designed for PCB mounting. They consist of an NPN phototransistor and an IR LED within a black plastic housing. They have an enhanced low current roll-off which improves the contrast ratio and block out ambient light. The light beam can be interrupted using the arm (flag), switching the transistor output between states that can readily drive logic gates.
1 products found
JPY: 970
USD: 6.04
-
OP240A Optek, 890nm IR LED, Side Looker Through Hole package OP240A
Optek OP240 and OP245 Series IREDs. The OP240 and OP245 series, from Optek Technology, are plastic Infrared (IR) emitting diodes. They are in side-looking epoxy, through-hole packages which are ideal for applications where space is limited. Suitable applications for the OP240 and OP245 series include PCB mounted slot switches and PCB interrupters.. Features of the OP240 and OP245 series: Side-looking package Wide beam angle Wavelength: 890nm Beam angle: 40° Dome and recessed lead types Operating temperature: -40°C to +100°C
1 products found
JPY: 920
USD: 5.72
-
Optek, OPI 1264B DC Input Transistor Output Optocoupler, Through Hole, 4-Pin OPI 1264B
Photocoupler, Transistor Output, 10kV ; 50kV, Optek. Range of optoelectronic isolators. Phototransistor output Axial leads Operating Temperature -40°C to +80°C
1 products found
JPY: 18,100
USD: 112.62
-
Optek Photoelectric Sensor Retroreflective 1.27 → 9.525 mm Detection Range NPN OPB608A
OPB608 Reflective Object Sensors
1 products found
JPY: 470
USD: 2.92
-
OPB815L Optek, Screw Mount Slotted Optical Switch, Phototransistor Output OPB815L
OPB815L and OPB815WZ Series Slotted Optical Switches
1 products found
JPY: 18,200
USD: 113.24
-
OPB815WZ Optek, Chassis Mount Slotted Optical Switch, Phototransistor Output OPB815WZ
OPB815L and OPB815WZ Series Slotted Optical Switches
1 products found
JPY: 1,320
USD: 8.21
-
Optek OP298B, 890nm IR LED, 5mm (T-1 3/4) Through Hole package OP298B
Optek OP293 and OP298 Series IREDs. The OP293 and OP298 series, from Optek Technology, are Infrared (IR) emitting diodes. They are in plastic TO-46 hermetic packages with through-hole mounting. The OP293 series has a wide irradiance pattern and the OP298 series has a narrow beam pattern. They come in a variety of power ranges with a high power output.. Features of the OP293 and OP298 series IREDs: TO-46 through-hole package High power output Wavelength: 890nm
1 products found
JPY: 180
USD: 1.12
-
OP593B Optek, IR Phototransistor, Through Hole 2-Pin TO-18 package OP593B
OP593 and OP598 Series Phototransistors. The OP593 and OP598 series, from Optek Technology Inc., are a family of NPN silicon phototransistors. They are in dark blue plastic TO-18 equivalent packages. They offer a wide receiving angle in a variety of different sensitivity ranges.. Features of the OP593 and OP598 phototransistors: Through-hole mounting TO-18 equivalent package Dark blue lens Wide receiving angle Operating temperature: -40 to +100 °C
1 products found
JPY: 85,700
USD: 533.23
-
OP295A Optek, 890nm IR LED, 5mm (T-1 3/4) Through Hole package OP295A
Optek OP295, OP296 and OP297 Series IREDs. The OP295, OP296 and OP297 series, from Optek Technology, are Infrared (IR) emitting diodes in a plastic T-1 3/4 (5mm) package. They offer a narrow beam angle and efficient heat dissipation. Their silver-copper lead frames enable their thermal characteristics.
1 products found
JPY: 1,010
USD: 6.28
-
OPB365T55 Optek, Screw Mount Slotted Optical Switch, Phototransistor Output OPB365T55
OPB355/360/370/380/390 Series Slotted Optical Switches. This family of slotted optical sensors from Optek Technology enables you to create a custom device from a standard product line. This flexibility includes choices of slot width, aperture, shell material, mounting configurations and lead spacing, or wires. An opaque plastic housing minimises the sensitivity to visible and near IR light. The parallel faces inside the slot are covered with an IR transmissive plastic or opaque plastic with an opening. The IR transmissive plastic is suitable for applications which require dust protection and the opaque is for applications that require maximum protection against ambient light. The OPB360, OPB370, OPB380 and OPB390 utilise a phototransistor sensor. The OPB355 has a photodiode sensor. Suitable applications for the slotted optical switches include; non-contact object sensing, assembly line automation, machine automation, equipment safety and machine safety.. Features of the slotted optical switches: PCB mounted: OPB355, OPB360, OPB370 Wire connection: OPB380, OPB390 Variety of choices within a standard range "L", "N", "P" or "T" mounting configurations
1 products found
JPY: 900
USD: 5.60
-
OP224 Optek, 890nm IR LED, Metal Can OP224
Optek OP223 and OP224 Series IREDs. The OP223 and OP224 series, from Optek, are hermetic Infrared (IR) emitting diodes. They are mounted in hermetically sealed "Pill" type metal can packages. Their compact package allows for high device density mounting. A narrow irradiance pattern provides high on-axis intensity for coupling efficiency.. Features of the OP223 and OP224 series: Narrow irradiance pattern Enhanced temperature range Compact metal can package Wavelength: 890nm
1 products found
JPY: 291,000
USD: 1,810.60
-
OP224 Optek, 890nm IR LED, Metal Can OP224
Optek OP223 and OP224 Series IREDs. The OP223 and OP224 series, from Optek, are hermetic Infrared (IR) emitting diodes. They are mounted in hermetically sealed "Pill" type metal can packages. Their compact package allows for high device density mounting. A narrow irradiance pattern provides high on-axis intensity for coupling efficiency.. Features of the OP223 and OP224 series: Narrow irradiance pattern Enhanced temperature range Compact metal can package Wavelength: 890nm
1 products found
JPY: 3,640
USD: 22.65
-
OPB625 Optek, Through Hole Slotted Optical Switch, Buffer, Open-Collector with 10K Pull-Up Resistor Output OPB625
OPB625, OPB626, OPB627 and OPB628 Photologic Series Slotted Optical Switches. This series of Photologic® slotted optical switches, from Optek Technology, consist of an IR LED and a monolithic integrated circuit. This includes a photodiode, a linear amplifier and a Schmitt trigger on a single silicon chip. These slotted optical switches feature a TTL/LSTTL compatible logic level output. They offer four output options.. Features of the slotted optical switches: PCB mounted Lead centers: 8.13 mm Gap size: 4.83 mm Enhanced signal to noise ratio
1 products found
JPY: 57,400
USD: 357.14
-
OPB625 Optek, Through Hole Slotted Optical Switch, Buffer, Open-Collector with 10K Pull-Up Resistor Output OPB625
OPB625, OPB626, OPB627 and OPB628 Photologic Series Slotted Optical Switches. This series of Photologic® slotted optical switches, from Optek Technology, consist of an IR LED and a monolithic integrated circuit. This includes a photodiode, a linear amplifier and a Schmitt trigger on a single silicon chip. These slotted optical switches feature a TTL/LSTTL compatible logic level output. They offer four output options.. Features of the slotted optical switches: PCB mounted Lead centers: 8.13 mm Gap size: 4.83 mm Enhanced signal to noise ratio
1 products found
JPY: 610
USD: 3.80
-
OPB460T11 Optek, Screw Mount Slotted Optical Switch, Buffer, Open-Collector with 10K Pull-Up Resistor Output OPB460T11
OPB460, OPB470, OPB480 and OPB490 Series Slotted Optical Switches. This family of Photologic® slotted optical switches, from Optek Technology, offer you various options enabling design flexibility. This flexibility includes choices of slot width, aperture, shell material, mounting configurations and lead spacing, or wires. An opaque plastic housing minimises the sensitivity to visible and near IR light. The parallel faces inside the slot are covered with an IR transmissive plastic or opaque plastic with an opening. The IR transmissive plastic is suitable for applications which require dust protection and the opaque is for applications that require maximum protection against ambient light. Suitable applications for the slotted optical switches include; mechanical switch replacement, speed indication, mechanical limit indication and edge sensing.. Features of the slotted optical switches: PCB mounted: OPB460 to OPB473 26 AWG wires: OPB480 to OPB493 Range of apertures Data rates up to 250 kB Low power consumption
1 products found
JPY: 21,700
USD: 135.02
-
OPB460T11 Optek, Screw Mount Slotted Optical Switch, Buffer, Open-Collector with 10K Pull-Up Resistor Output OPB460T11
OPB460, OPB470, OPB480 and OPB490 Series Slotted Optical Switches. This family of Photologic® slotted optical switches, from Optek Technology, offer you various options enabling design flexibility. This flexibility includes choices of slot width, aperture, shell material, mounting configurations and lead spacing, or wires. An opaque plastic housing minimises the sensitivity to visible and near IR light. The parallel faces inside the slot are covered with an IR transmissive plastic or opaque plastic with an opening. The IR transmissive plastic is suitable for applications which require dust protection and the opaque is for applications that require maximum protection against ambient light. Suitable applications for the slotted optical switches include; mechanical switch replacement, speed indication, mechanical limit indication and edge sensing.. Features of the slotted optical switches: PCB mounted: OPB460 to OPB473 26 AWG wires: OPB480 to OPB493 Range of apertures Data rates up to 250 kB Low power consumption
1 products found
JPY: 890
USD: 5.54
-
OPB830L51 Optek, Screw Mount Slotted Optical Switch, Phototransistor Output OPB830L51
OPB830 and OPB840 Series Slotted Optical Switches. This family of slotted optical sensors, from Optek Technology, enable you to create a custom device from a standard product line. This flexibility includes choices of aperture, shell material, and lead spacing. An opaque plastic housing minimises the sensitivity to visible and near IR light. The parallel faces inside the slot are covered with an IR transmissive plastic or opaque plastic with an opening. The IR transmissive plastic is suitable for applications which require dust protection and the opaque is for applications that require maximum protection against ambient light.. Features of the slotted optical switches: Slot width: 3.18 mm Opaque or IR transmissive surfaces Side mounted Choice of lead spacing
1 products found
JPY: 18,900
USD: 117.60
-
OPB830L51 Optek, Screw Mount Slotted Optical Switch, Phototransistor Output OPB830L51
OPB830 and OPB840 Series Slotted Optical Switches. This family of slotted optical sensors, from Optek Technology, enable you to create a custom device from a standard product line. This flexibility includes choices of aperture, shell material, and lead spacing. An opaque plastic housing minimises the sensitivity to visible and near IR light. The parallel faces inside the slot are covered with an IR transmissive plastic or opaque plastic with an opening. The IR transmissive plastic is suitable for applications which require dust protection and the opaque is for applications that require maximum protection against ambient light.. Features of the slotted optical switches: Slot width: 3.18 mm Opaque or IR transmissive surfaces Side mounted Choice of lead spacing
1 products found
JPY: 760
USD: 4.73
-
OPB916BZ Optek, Screw Mount Slotted Optical Switch, Buffer, Open-Collector with 10K Pull-Up Resistor Output OPB916BZ
OPB916 and OPB917 Series Slotted Optical Switches. The OPB916 and OPB917 families of Photologic® slotted optical switches, from Optek Technology, offer you various options enabling design flexibility. This flexibility includes choices of slot width, aperture, shell material, mounting configurations and lead spacing, or wires. An opaque plastic housing minimises the sensitivity to visible and near IR light. The OPB916 and OPB917 slotted optical switches feature a feep slow which offers longer reach of the optical path from the mounting plane. The parallel faces inside the slot are covered with an IR transmissive plastic or opaque plastic with an opening. The IR transmissive plastic is suitable for applications which require dust protection and the opaque is for applications that require maximum protection against ambient light. Suitable applications for the slotted optical switches include; mechanical switch replacement, speed indication, mechanical limit indication and edge sensing.
1 products found
JPY: 34,700
USD: 215.90
-
OPB916BZ Optek, Screw Mount Slotted Optical Switch, Buffer, Open-Collector with 10K Pull-Up Resistor Output OPB916BZ
OPB916 and OPB917 Series Slotted Optical Switches. The OPB916 and OPB917 families of Photologic® slotted optical switches, from Optek Technology, offer you various options enabling design flexibility. This flexibility includes choices of slot width, aperture, shell material, mounting configurations and lead spacing, or wires. An opaque plastic housing minimises the sensitivity to visible and near IR light. The OPB916 and OPB917 slotted optical switches feature a feep slow which offers longer reach of the optical path from the mounting plane. The parallel faces inside the slot are covered with an IR transmissive plastic or opaque plastic with an opening. The IR transmissive plastic is suitable for applications which require dust protection and the opaque is for applications that require maximum protection against ambient light. Suitable applications for the slotted optical switches include; mechanical switch replacement, speed indication, mechanical limit indication and edge sensing.
1 products found
JPY: 1,410
USD: 8.77
-
OPB360T51 Optek, Screw Mount Slotted Optical Switch, Phototransistor Output OPB360T51
OPB355/360/370/380/390 Series Slotted Optical Switches. This family of slotted optical sensors from Optek Technology enables you to create a custom device from a standard product line. This flexibility includes choices of slot width, aperture, shell material, mounting configurations and lead spacing, or wires. An opaque plastic housing minimises the sensitivity to visible and near IR light. The parallel faces inside the slot are covered with an IR transmissive plastic or opaque plastic with an opening. The IR transmissive plastic is suitable for applications which require dust protection and the opaque is for applications that require maximum protection against ambient light. The OPB360, OPB370, OPB380 and OPB390 utilise a phototransistor sensor. The OPB355 has a photodiode sensor. Suitable applications for the slotted optical switches include; non-contact object sensing, assembly line automation, machine automation, equipment safety and machine safety.. Features of the slotted optical switches: PCB mounted: OPB355, OPB360, OPB370 Wire connection: OPB380, OPB390 Variety of choices within a standard range "L", "N", "P" or "T" mounting configurations
1 products found
JPY: 17,200
USD: 107.02
-
OPB360T51 Optek, Screw Mount Slotted Optical Switch, Phototransistor Output OPB360T51
OPB355/360/370/380/390 Series Slotted Optical Switches. This family of slotted optical sensors from Optek Technology enables you to create a custom device from a standard product line. This flexibility includes choices of slot width, aperture, shell material, mounting configurations and lead spacing, or wires. An opaque plastic housing minimises the sensitivity to visible and near IR light. The parallel faces inside the slot are covered with an IR transmissive plastic or opaque plastic with an opening. The IR transmissive plastic is suitable for applications which require dust protection and the opaque is for applications that require maximum protection against ambient light. The OPB360, OPB370, OPB380 and OPB390 utilise a phototransistor sensor. The OPB355 has a photodiode sensor. Suitable applications for the slotted optical switches include; non-contact object sensing, assembly line automation, machine automation, equipment safety and machine safety.. Features of the slotted optical switches: PCB mounted: OPB355, OPB360, OPB370 Wire connection: OPB380, OPB390 Variety of choices within a standard range "L", "N", "P" or "T" mounting configurations
1 products found
JPY: 690
USD: 4.29
-
Optek Photoelectric Sensor Retroreflective 3.8 mm Detection Range NPN OPB704W-Z
OPB703W/OPB704W/OPB705W Reflective Object Sensors
1 products found
JPY: 109,000
USD: 678.20
-
Optek Photoelectric Sensor Retroreflective 3.8 mm Detection Range NPN OPB704W-Z
OPB703W/OPB704W/OPB705W Reflective Object Sensors
1 products found
JPY: 1,100
USD: 6.84
-
Optek Photoelectric Sensor Retroreflective 12.7 mm Detection Range OPB715-Z
OPB715/6/7/8 Reflective Object Sensors
1 products found
JPY: 47,500
USD: 295.55
-
Optek Photoelectric Sensor Retroreflective 12.7 mm Detection Range OPB715-Z
OPB715/6/7/8 Reflective Object Sensors
1 products found
JPY: 1,910
USD: 11.88
-
OPB350W250Z Optek, Screw Mount Reflective Sensor, Phototransistor Output OPB350W250Z
Tube Liquid Sensor. The OPB350 series liquid sensor is designed to work with 3.2mm (1/8 inch) and 6.3mm (1/4 inch) outside diameter clear tubes. Used in conjunction with suitably designed output reference circuitry, output states such as "fluid present", "no fluid present" and "no tube present" can be recognised. Clear liquid present causes the phototransistor to sink the maximum current, while dark liquid present causes it to sink the minimum current. As bubbles pass through the tube, the signal will vary between the liquid present and no liquid states. If no liquid is present, the phototransistor sinks only a small amount of current. If no tube is present, the phototransistor sinks a larger current than in the no liquid state. Opaque plastic housing enhances ambient light rejection Lead length 610mm, 26 AWG wire Applications: non-contact sensing of oils and other petroleum products, coloured fluids, toner fluids and water
1 products found
JPY: 46,900
USD: 291.81
-
OPB350W250Z Optek, Screw Mount Reflective Sensor, Phototransistor Output OPB350W250Z
Tube Liquid Sensor. The OPB350 series liquid sensor is designed to work with 3.2mm (1/8 inch) and 6.3mm (1/4 inch) outside diameter clear tubes. Used in conjunction with suitably designed output reference circuitry, output states such as "fluid present", "no fluid present" and "no tube present" can be recognised. Clear liquid present causes the phototransistor to sink the maximum current, while dark liquid present causes it to sink the minimum current. As bubbles pass through the tube, the signal will vary between the liquid present and no liquid states. If no liquid is present, the phototransistor sinks only a small amount of current. If no tube is present, the phototransistor sinks a larger current than in the no liquid state. Opaque plastic housing enhances ambient light rejection Lead length 610mm, 26 AWG wire Applications: non-contact sensing of oils and other petroleum products, coloured fluids, toner fluids and water
1 products found
JPY: 1,890
USD: 11.76
-
Optek, OPI1264C DC Input NPN Phototransistor, Photosensor Output Optocoupler, Through Hole, 4-Pin OPI1264C
OPI110 and OPI1264 Series Optically Coupled Isolators. The OPI110 and OPI1264 series of optoisolators consist of an 890 nm IR LED and a NPN phototransistor sensor. They are housed within an opaque package which has a transmissive path between the IR LED and the photosensor. Suitable applications for the OPI120 and OPI123 series include; high voltage isolation between input and output, electrical isolation, and industrial, medical and office equipment.
1 products found
JPY: 17,000
USD: 105.77
-
Optek, OPI1264C DC Input NPN Phototransistor, Photosensor Output Optocoupler, Through Hole, 4-Pin OPI1264C
OPI110 and OPI1264 Series Optically Coupled Isolators. The OPI110 and OPI1264 series of optoisolators consist of an 890 nm IR LED and a NPN phototransistor sensor. They are housed within an opaque package which has a transmissive path between the IR LED and the photosensor. Suitable applications for the OPI120 and OPI123 series include; high voltage isolation between input and output, electrical isolation, and industrial, medical and office equipment.
1 products found
JPY: 1,390
USD: 8.65
