WJ Furse

WJ Furse Mains Protector　ESP DC12 D1

WJ Furse

WJ Furse Mains Protector　7TCA085460R0357 ESP DC24D1

WJ Furse

WJ Furse ESP Cat-6 Series 5 V Maximum Voltage Rating 1 kA, 10 kA Maximum Surge Current Cat-6 Surge Protector, DIN Rail　7TCA085400R0023 ESP CAT-6

WJ Furse Enhanced ethernet systems surge protector. Enhanced surge protector for use on twisted pair Ethernet systems with RJ45 connections. Suitable for shielded or unshielded twisted pair Very low let-through voltage between all lines No system impairment or start-up signal degradation Removable DIN rail clip included, or can be flat mounted

WJ Furse

WJ Furse 5 V dc Maximum Voltage Rating Mains Protector　ESP DC05 D1

WJ Furse

WJ Furse 16.7 V Maximum Voltage Rating 5 kA, 20 kA Maximum Surge Current RS485 Surge Protector, DIN Rail Mounting　7TCA085400R0191 ESP RS485

WJ Furse twisted- pair lightning Surge Arrestors - ESP D ; TN Series. From WJ Furse, these lightning surge arrestors are designed for use on twisted-pair lines found in process control equipment, modems and communications interfaces. These surge protectors offer full mode protection with very low let through voltage (to BS EN 62305) between all lines. The full mode design allows for the continued operation of protected equipment while also handling partial lightning currents. ESP series surge protectors offer repeated protection in lightning intense environments and are encased within a strong, flame retardant ABS housing. Features and benefits:. 300 mA current rating. Low inline resistance. Colour coded terminals. Effective earthing from substantial earth stud. Integral earthing plate for enhanced connection to earth with a CME kit. Supplied ready for flat mounting on the side or on the base. A built-in foot allows for clip-on mounting for top hat DIN Rails. Easy connection of cable screen to earth with screen terminal. Installation:. These surge protectors should be installed closely to the system's earth start point. They should be connected in series with the data communication or signal line close to the equipment that is being protected, such as the control panel. Alternatively, these surge protectors should be installed where the signal line enters or leaves the building. Surge protectors should be installed within a separate enclosure or in an existing enclosure. Accessories. CME 4 ( ; 239-731 239-731 ), WBX 3 ( ; 456-8112 456-8112 ), WBX 4 ( ; 456-8106 456-8106 )

WJ Furse

WJ Furse ESP SL Series 16.7 V Maximum Voltage Rating 2.5 kA, 20 kA Maximum Surge Current Twisted Pair Surge Protector,　7TCA085400R0063 ESP SL15

Signalling applications surge protector - ESP SL Series. Ultra-slim low-resistance enhanced surge protector suitable for twisted pair signalling applications Very low let-through voltage between all lines Very low (1Ω) in-line resistance High bandwidth Sturdy, flame retardant, polycarbonate housing Built-in DIN rail foot for easy installation 4-20 mA model (ESP SL30L/4-20) available with LED indication Also available with LED indication and isolated screen (ESP SL15L/I & ESP SL30L/I) Earthed through DIN rail foot or 4 sq mm earth terminal

WJ Furse

WJ Furse ESP SL Series 7.79 V Maximum Voltage Rating 2.5 kA, 20 kA Maximum Surge Current Twisted Pair Surge Protector,　7TCA085400R0058 ESP SL06

Signalling applications surge protector - ESP SL Series. Ultra-slim low-resistance enhanced surge protector suitable for twisted pair signalling applications Very low let-through voltage between all lines Very low (1Ω) in-line resistance High bandwidth Sturdy, flame retardant, polycarbonate housing Built-in DIN rail foot for easy installation 4-20 mA model (ESP SL30L/4-20) available with LED indication Also available with LED indication and isolated screen (ESP SL15L/I & ESP SL30L/I) Earthed through DIN rail foot or 4 sq mm earth terminal

WJ Furse

WJ Furse ESP SL Series 36.7 V Maximum Voltage Rating 2.5 kA, 20 kA Maximum Surge Current Twisted Pair Surge Protector,　7TCA085400R0067 ESP SL30

Signalling applications surge protector - ESP SL Series. Ultra-slim low-resistance enhanced surge protector suitable for twisted pair signalling applications Very low let-through voltage between all lines Very low (1Ω) in-line resistance High bandwidth Sturdy, flame retardant, polycarbonate housing Built-in DIN rail foot for easy installation 4-20 mA model (ESP SL30L/4-20) available with LED indication Also available with LED indication and isolated screen (ESP SL15L/I & ESP SL30L/I) Earthed through DIN rail foot or 4 sq mm earth terminal

WJ Furse

WJ Furse ESP SL Series 16.7 V Maximum Voltage Rating 2.5 kA, 20 kA Maximum Surge Current Twisted Pair Surge Protector,　7TCA085400R0064 ESP SL15L/I

Signalling applications surge protector - ESP SL Series. Ultra-slim low-resistance enhanced surge protector suitable for twisted pair signalling applications Very low let-through voltage between all lines Very low (1Ω) in-line resistance High bandwidth Sturdy, flame retardant, polycarbonate housing Built-in DIN rail foot for easy installation 4-20 mA model (ESP SL30L/4-20) available with LED indication Also available with LED indication and isolated screen (ESP SL15L/I & ESP SL30L/I) Earthed through DIN rail foot or 4 sq mm earth terminal

WJ Furse

WJ Furse ESP SL Series 36.7 V Maximum Voltage Rating 2.5 kA, 20 kA Maximum Surge Current Twisted Pair Surge Protector,　7TCA085400R0070 ESP SL30L/4-20

Signalling applications surge protector - ESP SL Series. Ultra-slim low-resistance enhanced surge protector suitable for twisted pair signalling applications Very low let-through voltage between all lines Very low (1Ω) in-line resistance High bandwidth Sturdy, flame retardant, polycarbonate housing Built-in DIN rail foot for easy installation 4-20 mA model (ESP SL30L/4-20) available with LED indication Also available with LED indication and isolated screen (ESP SL15L/I & ESP SL30L/I) Earthed through DIN rail foot or 4 sq mm earth terminal

WJ Furse

WJ Furse ESP Q Series 37.8 V Maximum Voltage Rating 5 kA, 20 kA Maximum Surge Current 8 Wire 30 V Surge Protector, DIN　7TCA085400R0107 ESP 30Q

UK Oftel NS/G/1235/W/100025. Quad 0.75A twisted-pair lightning surge arrestors. "4 pair enhanced surge protector suitable for twisted pair signalling applications Very low let-through voltage between all lines Very low (1Ω) in-line resistance Space efficient Sturdy, flame retardant, ABS housing Built in DIN foot for top hat and G DIN connection for easy installation. Product can also be flat-mounted Colour-coded terminals which can be removed for easy installation Earthed via DIN rail or M5 stud"

WJ Furse

WJ Furse D1 Series 280 V Maximum Voltage Rating 6.25 kA, 80 kA Maximum Surge Current Mains Surge Protector, DIN Rail　7TCA085460R0105 ESP 415D1

WJ Furse Power distribution systems enhanced surge protector- ESP-D1 Series. Enhanced surge protector for use on power distribution systems Very low let-through voltage between all lines (L-E, L-N, N-E) LED status indication with pre-failure warning Remote indication through volt-free contact Robust steel housing Compact DIN housing Neutral to Earth voltage warning

WJ Furse

WJ Furse ESP M1 Series 280 V Maximum Voltage Rating 6.25 kA, 80 kA Maximum Surge Current Mains Surge Protector, Panel　7TCA085460R0089 ESP 240M1

For part ESP 240 M1 (< 456-8112') 456-8112 the Network Rail approval applies – PA05/01832. NRS PADS ref: 086/047149. Enhanced surge protector. An appliance designed to protect electrical devices from voltage spikes. Enhanced surge protectors are ideal for use on power distribution systems. To protect connected electronic equipment from transient overvoltages on the mains supply such as computers, communications and control equipment. Our surge protectors offer an advanced pre-warning so you can stay protected with repeated protection, in lightning prone environments. These products are easy to apply and have an innovative feature to disconnect safely from faulty supplies.. Very low let-through voltage between all lines (L-E, L-N, N-E) LED status indication with pre-failure warning Remote indication through volt-free contact Robust steel housing Neutral to Earth voltage warning. Accessories. WBX 3 (< 456-8112') 456-8112 for ESP 240 M1 WBX 4 (< 798-3539') 798-3539 for ESP 415 M1

WJ Furse

WJ Furse D1 Series 280 V Maximum Voltage Rating 6.25 kA, 80 kA Maximum Surge Current Mains Surge Protector, DIN Rail　7TCA085460R0086 ESP 240D1

WJ Furse Power distribution systems enhanced surge protector- ESP-D1 Series. Enhanced surge protector for use on power distribution systems Very low let-through voltage between all lines (L-E, L-N, N-E) LED status indication with pre-failure warning Remote indication through volt-free contact Robust steel housing Compact DIN housing Neutral to Earth voltage warning

WJ Furse

WJ Furse ESP Cat-6 Series 58 V Maximum Voltage Rating 1 kA, 10 kA Maximum Surge Current Cat-6 PoE Surge Protector, DIN　7TCA085400R0024 ESP CAT-6/POE

WJ Furse Enhanced ethernet systems surge protector. Enhanced surge protector for use on twisted pair Ethernet systems with RJ45 connections. Suitable for shielded or unshielded twisted pair Very low let-through voltage between all lines No system impairment or start-up signal degradation Removable DIN rail clip included, or can be flat mounted

WJ Furse

WJ Furse D Series 280 V Maximum Voltage Rating 10A Maximum Surge Current Mains Protector, DIN Rail Mounting　7TCA085460R0323 ESP 240D-10A

WJ Furse Power distribution systems enhanced surge protector - ESP-D/ DS Series. The D/ DS range offers a further enhanced series to the existing ESP range of mains protector range for specific systems, complementing the existing D1 Series. Having a low let through voltage combined with the mains test Type 1, 2 and 3 to BS EN 61643, the D/ DS series is designed for use on low current single phase systems (up to 10A or 32A) to protect against transient over voltages on the mains supply, and offering an increased exposure level covering lighting protection zones (LPZ) 0 -3. It also features a 3 way visual indication of protector status and advanced pre-failure warning, and remote indication facilities to a BMS via a volt-free contact. (DS Version). Features and Benefits:. Combined type 1, 2 and 3 tested protector (to BS EN 61643) Low let through voltages Industry leading, enhanced protection to BS EN 62305 Compact DIN housing 3 way indication facility of protector status and advanced pre-failure warning Remote indication facility (DS Version) Protector ‘s offer repeated protection against transient over voltages. Applications:. The D/ DS range is for low current mains power supply applications, e.g. CCTV cameras, alarm panels, industrial battery chargers and telemetry equipment

WJ Furse

WJ Furse D Series 280 V Maximum Voltage Rating 32A Maximum Surge Current Mains Protector, DIN Rail Mounting　7TCA085460R0322 ESP 240D-32A

WJ Furse Power distribution systems enhanced surge protector - ESP-D/ DS Series. The D/ DS range offers a further enhanced series to the existing ESP range of mains protector range for specific systems, complementing the existing D1 Series. Having a low let through voltage combined with the mains test Type 1, 2 and 3 to BS EN 61643, the D/ DS series is designed for use on low current single phase systems (up to 10A or 32A) to protect against transient over voltages on the mains supply, and offering an increased exposure level covering lighting protection zones (LPZ) 0 -3. It also features a 3 way visual indication of protector status and advanced pre-failure warning, and remote indication facilities to a BMS via a volt-free contact. (DS Version). Features and Benefits:. Combined type 1, 2 and 3 tested protector (to BS EN 61643) Low let through voltages Industry leading, enhanced protection to BS EN 62305 Compact DIN housing 3 way indication facility of protector status and advanced pre-failure warning Remote indication facility (DS Version) Protector ‘s offer repeated protection against transient over voltages. Applications:. The D/ DS range is for low current mains power supply applications, e.g. CCTV cameras, alarm panels, industrial battery chargers and telemetry equipment

WJ Furse

WJ Furse DS Series 280 V Maximum Voltage Rating 10A Maximum Surge Current Mains Protector, DIN Rail Mounting　7TCA085460R0317 ESP 240DS-10A

WJ Furse Power distribution systems enhanced surge protector - ESP-D/ DS Series. The D/ DS range offers a further enhanced series to the existing ESP range of mains protector range for specific systems, complementing the existing D1 Series. Having a low let through voltage combined with the mains test Type 1, 2 and 3 to BS EN 61643, the D/ DS series is designed for use on low current single phase systems (up to 10A or 32A) to protect against transient over voltages on the mains supply, and offering an increased exposure level covering lighting protection zones (LPZ) 0 -3. It also features a 3 way visual indication of protector status and advanced pre-failure warning, and remote indication facilities to a BMS via a volt-free contact. (DS Version). Features and Benefits:. Combined type 1, 2 and 3 tested protector (to BS EN 61643) Low let through voltages Industry leading, enhanced protection to BS EN 62305 Compact DIN housing 3 way indication facility of protector status and advanced pre-failure warning Remote indication facility (DS Version) Protector ‘s offer repeated protection against transient over voltages. Applications:. The D/ DS range is for low current mains power supply applications, e.g. CCTV cameras, alarm panels, industrial battery chargers and telemetry equipment

WJ Furse

WJ Furse DS Series 280 V Maximum Voltage Rating 32A Maximum Surge Current Mains Protector, DIN Rail Mounting　7TCA085460R0318 ESP 240DS-32A

WJ Furse Power distribution systems enhanced surge protector - ESP-D/ DS Series. The D/ DS range offers a further enhanced series to the existing ESP range of mains protector range for specific systems, complementing the existing D1 Series. Having a low let through voltage combined with the mains test Type 1, 2 and 3 to BS EN 61643, the D/ DS series is designed for use on low current single phase systems (up to 10A or 32A) to protect against transient over voltages on the mains supply, and offering an increased exposure level covering lighting protection zones (LPZ) 0 -3. It also features a 3 way visual indication of protector status and advanced pre-failure warning, and remote indication facilities to a BMS via a volt-free contact. (DS Version). Features and Benefits:. Combined type 1, 2 and 3 tested protector (to BS EN 61643) Low let through voltages Industry leading, enhanced protection to BS EN 62305 Compact DIN housing 3 way indication facility of protector status and advanced pre-failure warning Remote indication facility (DS Version) Protector ‘s offer repeated protection against transient over voltages. Applications:. The D/ DS range is for low current mains power supply applications, e.g. CCTV cameras, alarm panels, industrial battery chargers and telemetry equipment

WJ Furse

WJ Furse Copper Tape Bonding Clamp 26mm　7TCA083710R0000 BN105

BS EN 50164-1 Class H, BS 7430. Furse Tape Bonding Clamp. Furse Tape Bonding Clamp is designed to facilitate bonding to steel structures onto a lightning protection system. Features. High-quality copper and aluminium alloys. Suit maximum tape width 26 mm. Application. Bonding tape to steel structure

WJ Furse

WJ Furse Copper Tape Junction Clamp Max. Conductor Size 26 x 8mm　7TCA083610R0002 CN105-H

IEC/BS EN 62561-1 Class H, UL96. Furse Tape Junction Clamp. Furse tape junction lamp is designed to connect lightning protection to earthing system and facilitate periodic testing.The clamped connection is easily made/remade to allow for periodic testing. Features. Manufactured from high quality copper and aluminium alloys. Low resistance connection between overlapping tapes. Simple to install. Tightening torque 13 Nm. Application. Used to provide an effective low resistance connection between overlapping tapes.

WJ Furse

WJ Furse Copper Alloy Rod to Tape Clamp Max. Conductor Size 26 x 12mm Nominal Rod dia. 12.7mm　7TCA083210R0004 CR105

IEC/BS EN 62561-1 Class H BS 7430 UL467. Furse Rod to Tape Clamp (type A). Furse Rod to Tape Clamp (Type A) is designed to connect earth rod to copper tape to complete earth rod assembly. Conductivity and mechanical strength are essential considerations in clamp design to ensure that an earthing system remains operative for many years. Features. Corrosion resistance. High-quality copper and aluminium alloys. Phosphor bronze fitting. Tightening torque 15 Nm. Applications. Used to connect earth rod to copper tape.

WJ Furse

WJ Furse Copper Alloy Rod to Tape Clamp Nominal Rod dia. 9.5mm　7TCA083220R0002 CR205

IEC/BS EN 62561-1 Class H BS 7430. Furse Rod to Cable Clamp (type B). Furse Rod to Cable Clamp (type B) is designed to provide a high quality, low-resistance connection between stranded conductor and earth rod. Features. High-quality copper and aluminium alloys. Phosphor bronze fitting. Applications. Used for connecting rod to cable.

WJ Furse

WJ Furse Copper Alloy Rod to Cable Clamp Nominal Rod dia. 16mm　7TCA083220R0010 CR515

BS EN 62561-1 Class H BS 7430 UL 467. Furse Rod to Cable Clamp (type G). Furse Rod to Cable Clamp (type G) is designed to connect earth rod to copper cable to complete earth rod assembly. Features. High-quality copper and aluminium alloys. Phosphor bronze fitting. Low resistance between solid circular or stranded conductor and an earth rod. Tightening torque 12 Nm. Applications. Used for connecting rod to cable.

WJ Furse

WJ Furse Copper Max. Conductor Size 25 x 3mm　7TCA083610R0010 CT105-H

IEC/BS EN 62561-1 Class H. UL96. Furse Tape Crossover Clamp. Furse Tape Crossover Clamp is designed for forming cross, tee, through and right angle joints with tapes that are fixed to a building or structure. The screws are retained in 1 part of clamp with O rings when fitting conductor to prevent screws being lost and ensure a simple installation. Features. High quality copper and aluminium alloys. Low resistance connection between overlapping tapes. Simple to install. Tightening torque 5 Nm. Applications. Used to form straight through, cross or tee joints in tape and bar.

WJ Furse

WJ Furse Copper Lightning Earth Rod Nominal Rod dia. 9mm 3/8in　7TCA083120R0011 RB005

Furse Lightning Unthreaded Copperbond Earth Rod. Furse Lightning Unthreaded Copperbond Earth Rod offers installers the most economical method of achieving a low earth resistance. Features. High tensile strength Low carbon steel core Highly resistant to corrosion. Copper thickness minimum 250 microns. Applications. Designed for use where extremely high corrosion resistance and long service life are required.

WJ Furse

WJ Furse WBX Series ESP Protector, Surface Mount Mounting　7TCA085410R0032 WBXD4

WJ Furse

［Discontinued］WJ Furse WBX, Polycarbonate Enclosure, IP67, 230 x 80 x 85mm　WBX 3

Network Rail approval (ESP 240-5A/BX) – PA05/02896. NRS PADS ref: 087/037285. Overvoltage Protectors for Low Current Mains Supplies. Over Voltage protectors for low current mains power supplies to protect electronic equipment e.g. CCTV cameras, alarm panels and telemetry equipment. Very low let-through voltage between all lines (L-E, L-N, N-E) Sturdy housing with M6 earth stud Removable DIN rail foot for easy installation (unboxed versions). Can also be flat-mounted. IP66 rated boxed version (/BX parts) Colour-coded terminals. Weatherproof Enclosures. Tough polycarbonate enclosures. WBX enclosures for ESP protectors provide added protection in damp and dirty environments. Ideal for use when the protectors cannot be installed within an existing equipment panel or enclosure.

WJ Furse

［Discontinued］WJ Furse ESP RF Series 86 V Maximum Voltage Rating 1 kA, 10 kA Maximum Surge Current Coaxial Surge Protector, Screw　7TCA085450R0007 ESP RF 111A11

Coaxial RF systems Enhanced surge protectors – ESP RF Series. Enhanced surge protector suitable for co-axial RF systems Very low let-through voltage (ESP RF111A11 & ESP RF441A11) Very low attenuation Near unity VSWR over wide range of frequencies Wide bandwidth from DC (ESP RF 111221 & ESP RF 441221) to 2.7 GHz Available with BNC (ESP RF 441A11 & ESP RF 441221) and N type (ESP RF 111A11 & ESP RF 111221) connectors

WJ Furse

［Discontinued］WJ Furse ESP RF Series 86 V Maximum Voltage Rating 1 kA, 10 kA Maximum Surge Current Coaxial Surge Protector, Screw　7TCA085450R0014 ESP RF 441A11

Coaxial RF systems Enhanced surge protectors – ESP RF Series. Enhanced surge protector suitable for co-axial RF systems Very low let-through voltage (ESP RF111A11 & ESP RF441A11) Very low attenuation Near unity VSWR over wide range of frequencies Wide bandwidth from DC (ESP RF 111221 & ESP RF 441221) to 2.7 GHz Available with BNC (ESP RF 441A11 & ESP RF 441221) and N type (ESP RF 111A11 & ESP RF 111221) connectors

WJ Furse

［Discontinued］WJ Furse ESP RF Series 85 V Maximum Voltage Rating 2.5 kA, 20 kA Maximum Surge Current Coaxial Surge Protector, Screw　7TCA085450R0003 ESP RF 111221

Coaxial RF systems Enhanced surge protectors – ESP RF Series. Enhanced surge protector suitable for co-axial RF systems Very low let-through voltage (ESP RF111A11 & ESP RF441A11) Very low attenuation Near unity VSWR over wide range of frequencies Wide bandwidth from DC (ESP RF 111221 & ESP RF 441221) to 2.7 GHz Available with BNC (ESP RF 441A11 & ESP RF 441221) and N type (ESP RF 111A11 & ESP RF 111221) connectors

WJ Furse

［Discontinued］WJ Furse ESP RF Series 85 V Maximum Voltage Rating 2.5 kA, 20 kA Maximum Surge Current Coaxial Surge Protector, Screw　7TCA085450R0011 ESP RF 441221

Coaxial RF systems Enhanced surge protectors – ESP RF Series. Enhanced surge protector suitable for co-axial RF systems Very low let-through voltage (ESP RF111A11 & ESP RF441A11) Very low attenuation Near unity VSWR over wide range of frequencies Wide bandwidth from DC (ESP RF 111221 & ESP RF 441221) to 2.7 GHz Available with BNC (ESP RF 441A11 & ESP RF 441221) and N type (ESP RF 111A11 & ESP RF 111221) connectors

WJ Furse

［Discontinued］WJ Furse Copper Lightning Earth Rod Threaded Coupling 5/8in　7TCA083160R0007 CG270

IEC/BS EN 62561-2 BS 7430. Furse Lightning Earth Rod Threaded Coupling. Furse Lightning Earth Rod Threaded Coupling is used for joining earth rods together facilitating deep driving and ensure continual contact between the rods both during and after installation. Features. 5⁄8 Coupling. High-strength copper

WJ Furse

［Discontinued］WJ Furse Aluminium Alloy, Copper Tape Clip Max. Conductor Size 25 x 3mm　7TCA083510R0006 CP210-H

UL96. Furse Metallic DC Tape Clip. Furse metallic DC Tape Clip is designed to fix down conductors to a building or structure. Features. High-quality copper and aluminium alloys. Excellent corrosion resistance. High pull off loads. Applications. For use with bare copper

WJ Furse

［Discontinued］WJ Furse Copper Lightning Earth Rod 5/8in　7TCA083120R0024 RB205-FU

IEC/BS EN 62561-2 BS 7430. Furse Lightning Threaded Copperbond Earth Rod. Furse Lightning Threaded Copperbond Earth Rod offers installers the most economical method of achieving a low earth resistance. Features. High tensile strength. Low carbon steel core. Highly resistant to corrosion. Copper thickness minimum 250 microns. Applications. Designed for use where extremely high corrosion resistance and long service life are required.

WJ Furse

［Discontinued］WJ Furse ESP 16A/BX Series 150 Vrms Maximum Voltage Rating 10kA Maximum Surge Current 1 Phase, DIN Rail Mounting　ESP 120-16A

WJ Furse

［Discontinued］WJ Furse ESP TV Series 140 V Maximum Voltage Rating 3kA Maximum Surge Current ESP Protector, Surface Mount Mounting　ESP CATV/F

WJ Furse

［Discontinued］WJ Furse ESP TV Series 18.9 V Maximum Voltage Rating 3kA Maximum Surge Current ESP Protector, Surface Mount Mounting　ESP MATV/F

WJ Furse

［Discontinued］WJ Furse ESP TV Series 18.9 V Maximum Voltage Rating 3kA Maximum Surge Current ESP Protector, Surface Mount Mounting　ESP SMATV/F

WJ Furse

［Discontinued］WJ Furse ESP TV Series 6.4 V Maximum Voltage Rating 3kA Maximum Surge Current ESP Protector, Surface Mount Mounting　ESP TV/F