Schneider Electric

Earth Bar H. 15mm L. 1.6 m Metal Plastic x W. 35mm x　LVS04226

Schneider Electric

Fuse Holder 30 A 600 V ac 1 Bag (12 Pieces)　DFCC1

Schneider Electric

Fuse Holder 30 A 600 V ac 1 Bag (4 Pieces)　DFCC3

Schneider Electric

Earth Strap Tin Plated Copper Diameter 150 x 12 mm 1 Bag (10 Pieces)　NSYEB156D6

Ground braided section 6 mm 2, length 150 mm, eyelet hole 6, 4 mm.
Packing Unit: 10.

Schneider Electric

Tube Fuse 6 A 8.5 x 32 mm 400 V ac (Time Lag) 1 Bag (10 Pieces) and others

Schneider Electric

Copper 1 Bag (10 Pieces)　NSYRBL216146M

The Schneider Electric NSYRBL216146M is a ground strip.
Nominal cross-sectional area is 2 x 16 + 14 x 6 mm 2.

Schneider Electric

Earth Strap 1 Bag (10 Pieces)　NSYRBL216296M

The Schneider Electric NSYRBL216296M is a 2 x 16 + 29 x 6 mm 2 ground strip.
The composition is 10 pieces. It comes with a 18 month warranty. It can be reached without using MERCURY-free SVHC.

Schneider Electric

Square Body Fuse 690 V ac　DF431700

Schneider Electric

Fuse Holder 25 A 400 V ac　DF81

Schneider Electric

Fuse Holder 1 Box (10 Pieces)　NSYTRASF520B

Schneider Electric

Earth Bar H. 12mm L. 450×W. 13mm x and others

FA Ubon

Panel Mounting Fuse Holder for Glass Tube Fuse, Cylindrical Type with Neon Lamp　FH-LNB-U

Fuse holder (FH) is for normal size (6.4φ x 30 mm) glass tube fuse.
Panel mounting hole diameter is φ18.

FA Ubon

Fuse holder for glass tube fuse and others

FA Ubon

Glass Tube Fuse 0.2 V for 125 V AC and others

FA Ubon

Glass Tube Fuse for Strong Electric 10.3-38 mm 5 Pieces and others

FA Ubon

Z Glass Tube Fuse 10 Pieces and others

FA Ubon

Glass Tube Fuse for 250 VAC 2 V and others

FA Ubon

Midget Glass Tube Fuse 10 Pieces and others

RS PRO

RS PRO 10A Manual Cap Panel Mount Fuse Holder for 5 x 20mm Fuse, PC1　563-784

Screw caps, screws
Completely inaccessible in accordance with BS EN60127-6

RS PRO

RS Pro, 16A Ceramic Cartridge Fuse, 6.3 x 32mm, Speed T　209-9311

RS PRO Miniature Anti-Surge Fuses. RS PRO offer this range of miniature ceramic cartridge fuses. These fuses are anti-surge (also known as slow-blow or time-delay) which means that they allow a current to flow for a short period, without the fuse blowing/shorting. These RS PRO fuses have a high breaking capacity and are 6.3mm x 32mm. They are ideal for providing protection to devices or internal circuits from short circuits and overcurrent. They are deliberately weaker components which, when too much current is drawn, will blow. Once the fuse has blown it will need replacing in order to make the circuit complete and allow the flow of current. RS PRO have a range of cartridge fuses types to suit all your requirements. Features: Ceramic Fuse 6.3 x 32 mm cartridge size T Speed Rating Cylindrical in shape Typical applications: Miniature fuses are a relatively cheap way of protecting electrical equipment from short circuits and overcurrent and can be used to protect electrical appliances, electronic equipment and component parts Additional Information: What size is it? 6.3 mm x32 mm is a miniature cartridge size. Miniature fuses are ideal for the protection of electrical appliances, electronic equipment and component parts What Speed is it? This particular fuse is T speed rated which means it is a slow acting fuse, sometimes referred to as anti-surge. It is able to tolerate higher levels for a short period, without shorting. Therefore, if a sudden change occurs, this fuse will not blow immediately. They are suitable for applications where a sudden flow of high current is required. What is Breaking Capacity? Breaking capacity is the level of current that the fuse can safely handle without exploding or rupturing. The breaking capacity of your fuse should be greater than the fault current of your electronic circuit. This particular fuse is HBC (High Breaking Capacity).

SATO PARTS CO., LTD.

Relay Fuse Holder (for phi 6.4 (6.35) x 30 mm)　F-810

Applicable Fuse Tube Size: φ6.4 x 30 mm (φ6.35 x 30 mm)
Rating: 250 V-7A (50 V MAX.)

SATO PARTS CO., LTD.

Fuse Holder Screw tightening Terminal 250 V -10 A Applicable size: phi 6.4 x 30 mm phi 6.35 x 30 mm　F-700-A

Copal Electronics

Return Type Overcurrent Protection Element Terminal Insertion Type Maximum Voltage 30 V Retention Current 1.10 A Trip Current 2.20 A and others

Linkman

Waterproof fuse Holder for mini flat type　R3-43A

Linkman

Waterproof fuse Holder　R3-61A

SATO PARTS CO., LTD.

Fuse Holder Anti-shock cap height: 10 mm 250 V -10 A Suitable size: phi 6.4 x 30 mm　F-4000-A

SATO PARTS CO., LTD.

Fuse Holder Anti-shock cap height: 6 mm 250 V -10 A Suitable size: phi 6.4 x 30 mm　F-4000-B

Cylindrical fuse box with panel attachment.

Linkman

Fuse Holder　WTN09F1107

Panel-mounted fuse holder suitable for glass tube fuses of 6.4 mm diameter and 30 mm length.

SATO PARTS CO., LTD.

Base Fuse Holder compatible size: phi 6.4 x 30 mm　F-7101-N

Linkman

Fuse Holder　WTN09F1111

SATO PARTS CO., LTD.

Base Fuse Holder compatible size: phi 6.4 x 30 mm phi 6.35 x 30 mm 1 pole and others

SATO PARTS CO., LTD.

Fuse Holder 250 V -10 A for bayonet type printed circuit board Compatible size: phi 5.2 x 20 mm　F-105

SATO PARTS CO., LTD.

Fuse Holder 250 V -10 A for bayonet type printed circuit board Compatible size: phi 6.4 x 30 mm　F-110

SATO PARTS CO., LTD.

Fuse Holder 250 V -6 A compatible size: phi 5.2 x 20 mm　F-115

SATO PARTS CO., LTD.

Fuse Holder Screw-Type Antishock Type 250 V -10 A Suitable Size: phi 6.4 x 30 mm　F-120-B

SATO PARTS CO., LTD.

Fuse Holder Cover F -200 -N only　F-200-C

SATO PARTS CO., LTD.

Fuse Holder 250 V -10 A compatible size: phi 6.4 x 30 mm　F-240-N

SATO PARTS CO., LTD.

Fuse Holder Screw-Type Antishock Type 250 V -30 A Suitable Size: phi 10.31 x 38.1 mm　F-30

SATO PARTS CO., LTD.

Fuse Holder Antishock type 250 V -5 A compatible: phi 5.2 x 20 mm and others

SATO PARTS CO., LTD.

Fuse Holder one-touch gray 250 V -8 A Suitable size: phi 5.2 x 20 mm　F600GY