RS PRO

RS PRO 10A Manual Cap Panel Mount Fuse Holder for 5 x 20mm Fuse, PC1　563-784

Screw caps, screws
Completely inaccessible in accordance with BS EN60127-6

RS PRO

RS Pro, 16A Ceramic Cartridge Fuse, 6.3 x 32mm, Speed T　209-9311

RS PRO Miniature Anti-Surge Fuses. RS PRO offer this range of miniature ceramic cartridge fuses. These fuses are anti-surge (also known as slow-blow or time-delay) which means that they allow a current to flow for a short period, without the fuse blowing/shorting. These RS PRO fuses have a high breaking capacity and are 6.3mm x 32mm. They are ideal for providing protection to devices or internal circuits from short circuits and overcurrent. They are deliberately weaker components which, when too much current is drawn, will blow. Once the fuse has blown it will need replacing in order to make the circuit complete and allow the flow of current. RS PRO have a range of cartridge fuses types to suit all your requirements. Features: Ceramic Fuse 6.3 x 32 mm cartridge size T Speed Rating Cylindrical in shape Typical applications: Miniature fuses are a relatively cheap way of protecting electrical equipment from short circuits and overcurrent and can be used to protect electrical appliances, electronic equipment and component parts Additional Information: What size is it? 6.3 mm x32 mm is a miniature cartridge size. Miniature fuses are ideal for the protection of electrical appliances, electronic equipment and component parts What Speed is it? This particular fuse is T speed rated which means it is a slow acting fuse, sometimes referred to as anti-surge. It is able to tolerate higher levels for a short period, without shorting. Therefore, if a sudden change occurs, this fuse will not blow immediately. They are suitable for applications where a sudden flow of high current is required. What is Breaking Capacity? Breaking capacity is the level of current that the fuse can safely handle without exploding or rupturing. The breaking capacity of your fuse should be greater than the fault current of your electronic circuit. This particular fuse is HBC (High Breaking Capacity).

SATO PARTS CO., LTD.

Relay Fuse Holder (for phi 6.4 (6.35) x 30 mm)　F-810

Applicable Fuse Tube Size: φ6.4 x 30 mm (φ6.35 x 30 mm)
Rating: 250 V-7A (50 V MAX.)

SATO PARTS CO., LTD.

Fuse Holder Screw tightening Terminal 250 V -10 A Applicable size: phi 6.4 x 30 mm phi 6.35 x 30 mm　F-700-A

Copal Electronics

Return Type Overcurrent Protection Element Terminal Insertion Type Maximum Voltage 30 V Retention Current 1.10 A Trip Current 2.20 A and others

SATO PARTS CO., LTD.

Fuse Holder Anti-shock cap height: 10 mm 250 V -10 A Suitable size: phi 6.4 x 30 mm　F-4000-A

SATO PARTS CO., LTD.

Fuse Holder Anti-shock cap height: 6 mm 250 V -10 A Suitable size: phi 6.4 x 30 mm　F-4000-B

Cylindrical fuse box with panel attachment.

Linkman

Fuse Holder　WTN09F1107

Panel-mounted fuse holder suitable for glass tube fuses of 6.4 mm diameter and 30 mm length.

SATO PARTS CO., LTD.

Base Fuse Holder compatible size: phi 6.4 x 30 mm　F-7101-N

Linkman

Fuse Holder　WTN09F1111

SATO PARTS CO., LTD.

Base Fuse Holder compatible size: phi 6.4 x 30 mm phi 6.35 x 30 mm 1 pole and others

SATO PARTS CO., LTD.

Fuse Holder 250 V -10 A for bayonet type printed circuit board Compatible size: phi 5.2 x 20 mm　F-105

SATO PARTS CO., LTD.

Fuse Holder 250 V -10 A for bayonet type printed circuit board Compatible size: phi 6.4 x 30 mm　F-110

SATO PARTS CO., LTD.

Fuse Holder 250 V -6 A compatible size: phi 5.2 x 20 mm　F-115

SATO PARTS CO., LTD.

Fuse Holder Screw-Type Antishock Type 250 V -10 A Suitable Size: phi 6.4 x 30 mm　F-120-B

SATO PARTS CO., LTD.

Fuse Holder Cover F -200 -N only　F-200-C

SATO PARTS CO., LTD.

Fuse Holder 250 V -10 A compatible size: phi 6.4 x 30 mm　F-240-N

SATO PARTS CO., LTD.

Fuse Holder Screw-Type Antishock Type 250 V -30 A Suitable Size: phi 10.31 x 38.1 mm　F-30

SATO PARTS CO., LTD.

Fuse Holder Antishock type 250 V -5 A compatible: phi 5.2 x 20 mm and others

SATO PARTS CO., LTD.

Fuse Holder one-touch gray 250 V -8 A Suitable size: phi 5.2 x 20 mm　F600GY

SATO PARTS CO., LTD.

Cover compatible with Fuse Holder: F -60　F-60-1C

SATO PARTS CO., LTD.

Fuse Holder 125 V -5 A for horizontal coupling soldering Size: phi 5.2 x 20 mm　F-60-B

SATO PARTS CO., LTD.

Compatible size for Fuse Holder Relay type 250 V -6 A soldering: phi 6.4 x 30 mm　F-7160

SATO PARTS CO., LTD.

Compatible size for Fuse Holder Relay type 250 V -3 A soldering: phi 5.2 x 20 mm　F-7175

Fuse holder attached to the middle of the cord.

SATO PARTS CO., LTD.

Fuse Holder 250 V -10 A compatible size: phi 5.2 x 20 mm　F-75

SATO PARTS CO., LTD.

Fuse Holder bayonet type 250 V -10 A Suitable size: phi 6.4 x 30 mm　F-95-N

SATO PARTS CO., LTD.

Fuse Holder Screw Type Anti-shock 250 V -10 A White Fit Size: phi 6.4 x 30 mm　F-130

SATO PARTS CO., LTD.

Fuse Holder Relay bayonet type 250 V -10 A compatible: phi 6.4 x 30 mm　F22

SATO PARTS CO., LTD.

Fuse Holder Relay bayonet type 125 V -7 A compatible: phi 5.2 x 20 mm　F-45

Fuse holder attached to the middle of a cable for fuses of 5 mm diameter and 20 mm length.

SATO PARTS CO., LTD.

Base Fuse Holder 250 V -10 A compatible: phi 6.4 x 30 mm 1 pole and others

SATO PARTS CO., LTD.

Base Fuse Holder Screw tightening Terminal 250 V -20 A Compatible size: phi 10.31 x 38.1 mm　F-7135

SATO PARTS CO., LTD.

Fuse Holder 250 V -5 A compatible size: phi 5.2 x 20 mm　F-7155

Fuse holder for 5.2 mm diameter 20 mm long fuse of panel mounting type.

SATO PARTS CO., LTD.

Fuse Holder Screw type 250 V -30 A compatible size: phi 10.31 x 38.1 mm　F7159

SATO PARTS CO., LTD.

Fuse Holder 125 V -3 A compatible size: phi 6.4 x 30 mm　F-3770

Fuse holder attached to the middle of the cord.

IDEC CORPORATION

Circuit Breaker 0.5A　NRF1100.5

IDEC CORPORATION

Circuit Breaker 1A　NRF1101A

IDEC CORPORATION

Circuit Breaker 2A　NRF1102A

IDEC CORPORATION

Circuit Breaker 3A　NRF1103A

IDEC CORPORATION

Circuit Breaker 10A　NRF11010A

IDEC CORPORATION

Circuit Breaker 15A　NRF11015A