Schneider Electric

Surge Suppressor Unit 230 V 20 kA Clip-on　EZ9L33620

Schneider Electric

Surge arrestor 400 V AC 40 kA DIN Rail　A9L15582

Schneider Electric

Surge Suppressor Unit 415 V 40 kA　KSBQPRD

Schneider Electric

Surge Arrestor 350 V 65 kA DIN Rail　A9L65102

Schneider Electric Cartridge C65-350 is used in power distribution networks for surge arrestor IPRD.
Type 2 surge arrester class with ground system TN/TT.

NIPPON CHEMI-CON

Disk-Type Ceramic Varistor 270V φ 10mm (10 Pieces, 1 Set) and others

RS PRO

RS PRO 500 V Maximum Voltage Rating Mains Protector, DIN Rail　240-393

Although these devices are designed to connect directly to the power distribution system, they cannot be used where a capacitor failure could cause an electrical shock.
DIN Rail Mounting

EPCOS

Metal Oxide Varistor 510 V 15000 A 1 Bag (5 Pieces)　B72220Q0321K101

UL, CSA, CECC
EnergetiQ Series-Q 14/Q20

Phoenix Contact

Phoenix Contact TTC-6-TVSD-C-12DC-PT-I Series 15 V dc Maximum Voltage Rating 300 (Nominal Discharge)A Maximum Surge　2906847

Phoenix Contact Surge Protection. A professional range of Phoenix Surge Protection Devices. These surge protection devices come with a mixture of Fine, Medium and Coarse surge protection. They also come with a mixture of integrated status indicators with floating signal circuit and grounded reference potential. All products are highly reliable and of excellent quality. Features and Benefits. - 6 mm overall width - Push in connection technology - Integrated status indicator without auxiliary energy and option of remote signalling

Phoenix Contact

Phoenix Contact TTC-6-TVSD-D-24DC-PT-I Series 30 V dc Maximum Voltage Rating Surge Protection Device, DIN Rail Mounting　2906851

Phoenix Contact Surge Protection. A professional range of Phoenix Surge Protection Devices. These surge protection devices come with a mixture of Fine, Medium and Coarse surge protection. They also come with a mixture of integrated status indicators with floating signal circuit and grounded reference potential. All products are highly reliable and of excellent quality. Features and Benefits. - 6 mm overall width - Push in connection technology - Integrated status indicator without auxiliary energy and option of remote signalling

Phoenix Contact

Phoenix Contact TTC-6-MOV-C-60DC-PT-I Series 75 V dc Maximum Voltage Rating 2 (Discharge)kA Maximum Surge Current Surge　2906857

Phoenix Contact Surge Protection. A professional range of Phoenix Surge Protection Devices. These surge protection devices come with a mixture of Fine, Medium and Coarse surge protection. They also come with a mixture of integrated status indicators with floating signal circuit and grounded reference potential. All products are highly reliable and of excellent quality. Features and Benefits. - 6 mm overall width - Push in connection technology - Integrated status indicator without auxiliary energy and option of remote signalling

Phoenix Contact

Phoenix Contact TTC-6-GDT-D-24AC-PT-I Series 30 V dc Maximum Voltage Rating 5 (Nominal Discharge)kA Maximum Surge　2906862

Phoenix Contact Surge Protection. A professional range of Phoenix Surge Protection Devices. These surge protection devices come with a mixture of Fine, Medium and Coarse surge protection. They also come with a mixture of integrated status indicators with floating signal circuit and grounded reference potential. All products are highly reliable and of excellent quality. Features and Benefits. - 6 mm overall width - Push in connection technology - Integrated status indicator without auxiliary energy and option of remote signalling

Phoenix Contact

Phoenix Contact TTC-6-2-HC-24DC-PT-I Series 30 V dc Maximum Voltage Rating 5 (Discharge)kA Maximum Surge Current Surge　2908439

Phoenix Contact TTC Series. A professional range of Phoenix Surge Protection Devices. These surge protection devices come with integrated status indicator and knife disconnection for either a 2 or 3 wire floating signal circuit. All products are highly reliable and of excellent quality. Features and Benefits. - 6 mm overall width - Push-in connection technology - Integrated status indicator without auxiliary energy and option of remote signaling - Integrated knife disconnection for easier maintenance work

EPCOS

EPCOS EHV Series 230V 10kA Through Hole 2 Electrode Arrester Gas Discharge Tube (GDT)　B88069X2930C102

Miniature Gas Filled, 2.5kA/2.5A. Suitable for use in subscriber-end equipment.

EPCOS

EPCOS EHV Series 90V 20kA Through Hole 2 Electrode Arrester Gas Discharge Tube (GDT)　B88069X1380S102

Miniature Gas Filled, 20kA/20A. Suitable for use in telecommunication exchange main distribution frames, and subscriber-end equipment.

EPCOS

EPCOS EHV Series 230V 20kA Through Hole 2 Electrode Arrester Gas Discharge Tube (GDT)　B88069X1630T602

Miniature Gas Filled, 20kA/20A. Suitable for use in telecommunication exchange main distribution frames, and subscriber-end equipment.

EPCOS

EPCOS EHV Series 350V 20kA Through Hole 2 Electrode Arrester Gas Discharge Tube (GDT)　B88069X2380S102

Miniature Gas Filled, 20kA/20A. Suitable for use in telecommunication exchange main distribution frames, and subscriber-end equipment.

Roxburgh EMC

Roxburgh EMC VSU Series 480 V Maximum Voltage Rating 40A Maximum Surge Current Transient Voltage Suppressor　VSU3W

Designed for use in conjunction with following filters:< 226-6426') 226-6426/, < 264-8761') 264-8761/, < 188-9220') 188-9220/, < 188-9236') 188-9236/ and < 188-9157') 188-9157/. Roxburgh VSU Series. Roxburgh VSU series of external voltage suppression units are ideal for general purpose use. Connections by 150mm flying leads and fixing with earth tab

EPCOS

EPCOS EHV Series 90V 5kA Through Hole 2 Electrode Arrester Gas Discharge Tube (GDT)　B88069X0720S102

Miniature Gas Filled, 5kA/5A. Over-voltage arresters for the protection of telecommunication systems and equipment with measuring, control and regulating lines Robust ceramic body Low impulse spark-over voltage

Phoenix Contact

Phoenix Contact VAL-MS BE Series Surge Arrester　2817741

VALVETRAB® Pluggable single-pole modular lightning surge protector. VALVETRAB is a mid-capacity lightning and surge protected designed to protect the low voltage single- or three-phase power supply of your installations. With its strong surge protection, it quenches overvoltage resulting from distant impacts or resulting phenomena. Its pluggable design allows for easy maintenance (surge protector plug combined with a base for electrical connection). Disconnection feature provides continuity of electrical power supply. Features a mechanical indicator which provides a status (operational or out of order) at all times and changeover contacts for alarm reports. Connects in parallel on the mains network and snaps onto a symmetric profile. A wiring bridge allows several modules to be quickly mounted and bridged on the ground connection.

EPCOS

EPCOS EHV Series 150V 10kA Through Hole 2 Electrode Arrester Gas Discharge Tube (GDT)　B88069X0880S102

Miniature Gas Filled, 5kA/5A. Over-voltage arresters for the protection of telecommunication systems and equipment with measuring, control and regulating lines Robust ceramic body Low impulse spark-over voltage

EPCOS

EPCOS EHV Series 230V 5kA Axial 2 Electrode Arrester Gas Discharge Tube (GDT)　B88069X0660S102

Miniature Gas Filled, 5kA/5A. Over-voltage arresters for the protection of telecommunication systems and equipment with measuring, control and regulating lines Robust ceramic body Low impulse spark-over voltage

MTL

MTL MA15 Series 140 V Maximum Voltage Rating 18kA Maximum Surge Current Mains Surge Protector, DIN Rail Mounting　MA15/D/1/SI/RS

UL 1449. Surge & Noise Suppressor, MA15 Series. IEC Class III surge protection AC or DC operation Thermal and short-circuit protection LED status indicator Exceeds requirements of IEC 61000-4-5

MTL

MTL SLP Series 20kA Maximum Surge Current Surge Protection Device, DIN Rail Mounting　SLP32D/RS

Ultra Slim Two Loop Protector. Ultra-slim devices for protecting electronic equipment against surges on control loop cabling. Protection for two loops per SLP, or a single four-wire circuit ATEX Certified Multi-stage hybrid protection circuitry

Roxburgh EMC

Roxburgh EMC XEB Series Mains Protector, Flange Mount Mounting　XEB1201

These devices are designed for connecting directly across a mains supply but should NOT be used in positions where failure of the capacitor would expose anyone to electric shock. XE/XEB Series. Contact suppressors comprising a resistor and capacitor in series improve contact life May be connected across a switch or relay contacts to suppress interference generated when switching reactive loads Self healing construction and self extinguishing case

Roxburgh EMC

Roxburgh EMC CRH Series 500 V ac Maximum Voltage Rating 3 Phase, Flange Mount Mounting　CRH30330

These devices are designed for connecting directly across a mains supply but should NOT be used in positions where failure of the capacitor would expose anyone to electric shock. CRH Series. Industrial grade RC contact suppressors comprising a resistor and capacitor in series to improve contact life. May be connected across switch or relay contacts to suppress interference generated when switching reactive loads Self healing construction and self extinguishing case 500Vac rating - single-phase and three-phase versions Moulded-in surface mounting lugs

Roxburgh EMC

Roxburgh EMC CRH Series 500 V ac Maximum Voltage Rating 3 Phase, Flange Mount Mounting　3CRH30330

These devices are designed for connecting directly across a mains supply but should NOT be used in positions where failure of the capacitor would expose anyone to electric shock. CRH Series. Industrial grade RC contact suppressors comprising a resistor and capacitor in series to improve contact life. May be connected across switch or relay contacts to suppress interference generated when switching reactive loads Self healing construction and self extinguishing case 500Vac rating - single-phase and three-phase versions Moulded-in surface mounting lugs

Littelfuse

Littelfuse CG2 Series 920V 2.5kA Axial 2 Electrode Arrester Gas Discharge Tube (GDT)　CG2800LTR

Littelfuse CG2 Series Gas Discharge Tube. Littelfuse CG2 series GDT plasma arresters are ideal for protecting equipment for which higher voltage limits and holdover voltages are necessary. Applications include communication lines, CATV equipment, test equipment, data lines, power supplies, instrumentation circuits and medical electronics. Small size Rugged ceramic-metal construction Low capacitance (<1pF)

Littelfuse

Littelfuse PGB1 Series 24 V dc Maximum Voltage Rating ESD Suppressor, Surface Mount Mounting　PGB1010603MRHF

PulseGuard® ESD Suppressors. RoHS compliant, Halogen-free, Lead-free Ultra-low capacitance Low leakage current Fast responce time Bi-directional Withstands multiple ESD strikes Compatible with pick-and-place processes

Littelfuse

Littelfuse PGB1 Series 24 V dc Maximum Voltage Rating ESD Suppressor, Surface Mount Mounting　PGB1010603NR

PulseGuard® ESD Suppressors. RoHS compliant, Halogen-free, Lead-free Ultra-low capacitance Low leakage current Fast responce time Bi-directional Withstands multiple ESD strikes Compatible with pick-and-place processes

Bourns

Bourns 2049 Series 600V 20kA Axial 2 Electrode Gas Discharge Tube　2049-60-BLF

2049 Series Gas Discharge Tube 20kA/20A. Medium duty low capacitance Applications in Telecommunications, Industrial and Consumer electronics

Bourns

Bourns 2057 Series 75V 10kA Axial 2 Electrode Gas Discharge Tube　2057-07-BLF

2057 Series Gas Discharge Tube 10kA/5A. Light duty axial design Low capacitance and leakage Applications in Telecommunications, Industrial and Consumer electronics

Bourns

Bourns 2095 Series 3000V 8kA Axial 2 Electrode Gas Discharge Tube　2095-300-BLF

2095 Series Gas Discharge Tube 8kA/2A. Axial leaded device High Voltage range High insulation resistance Aplications include Telecomunications, Industrial and Consumer electronics

Phoenix Contact

Phoenix Contact VAL-MS 230 ST Series 230 V ac Maximum Voltage Rating 40kA Maximum Surge Current Surge Arrester　2798844

VALVETRAB® Pluggable single-pole modular lightning surge protector. VALVETRAB is a mid-capacity lightning and surge protected designed to protect the low voltage single- or three-phase power supply of your installations. With its strong surge protection, it quenches overvoltage resulting from distant impacts or resulting phenomena. Its pluggable design allows for easy maintenance (surge protector plug combined with a base for electrical connection). Disconnection feature provides continuity of electrical power supply. Features a mechanical indicator which provides a status (operational or out of order) at all times and changeover contacts for alarm reports. Connects in parallel on the mains network and snaps onto a symmetric profile. A wiring bridge allows several modules to be quickly mounted and bridged on the ground connection.

Huber & Suhner

Huber & Suhner 3402 Series 230 V Maximum Voltage Rating 20 kA, 30 kA Maximum Surge Current EMP Protector, Panel Mount　3402.17.A

Except for some, it contains gas capsules. Part number < 111-642') 111-642/requires a separate order for gas capsules. Part No. < 494-919 Reference ') 494-919 Reference/
Gas Capsule Lightning Protector

Huber & Suhner

Huber & Suhner 3406 Series 200 V Maximum Voltage Rating 5 kA, 10 kA Maximum Surge Current EMP Protector, Panel Mount　3406.26.0004

Except for some, it contains gas capsules. Part number < 111-642') 111-642/requires a separate order for gas capsules. Part No. < 494-919 Reference ') 494-919 Reference/
Gas Capsule Lightning Protector

Huber & Suhner

Huber & Suhner 3406 Series 200 V Maximum Voltage Rating 5 kA, 10 kA Maximum Surge Current EMP Protector, Panel Mount　3406.17.0009

Except for some, it contains gas capsules. Part number < 111-642') 111-642/requires a separate order for gas capsules. Part No. < 494-919 Reference ') 494-919 Reference/
Gas Capsule Lightning Protector

RS PRO

RS PRO 500 V Maximum Voltage Rating 1 Phase, Flange Mount　813-430

These devices are designed for connecting directly across a mains supply but should NOT be used in positions where failure of the capacitor would expose anyone to electric shock
Chassis Mount

Phoenix Contact

Phoenix Contact CN-UB-280DC-SB Series Type N Adapter　2818148

  Quality complies with IEC 61 644-1. Coaxial radio line protector, 50 Ω. Coax line protector designed to protect video signal transmission lines with N-type connectors. This adaptor features a male N connector and a female N connector, which allows it to be installed hassle-free in connections, even existing connections. The earth bond connection must be created using the shortest path.

WJ Furse

WJ Furse Mains Protector　ESP DC12 D1

WJ Furse

WJ Furse Mains Protector　7TCA085460R0357 ESP DC24D1