Spec

• Battery operated rainproof sensor light
• Detection method: Infrared passive
• Detection area: about 160 degrees, about 10 m
• Adjustment of irradiation direction: Up direction/about 30 degrees, Down direction/about 60 degrees, Outside/about 90 degrees, Inside/about 40 degrees movable (left and right movable independently)
• Power supply: 3 single alkaline batteries (sold separately)
• Battery life: About 9.5 months
• Light source: White LED (LED not replaceable)
• Total luminous flux: 700 lm
• Lit/blink holding time: 5 seconds lit, 10 seconds lit, 10 seconds blinking
• Lighting start illuminance: approx. 4 lx (night) to (day)
• Protection rating: IP 45 (jet proof type)
• Operating ambient temperature range: -20 to + 40 degrees C
• Size: approx. 113 (W) x 116 (D) x 186 (H) mm
• Weight: About 320 g (excluding rechargeable batteries)
• Accessories: 2 mounting screws, 2 concrete sleeves, 1 masking cover, 1 set of clamps, 2 diffusion panels
• Location: Indoor/outdoor
• Sensors detect movement of people and cars and turn on automatically
• Waterproof type that can be installed outdoors (IP 45 jet-proof type)
• Because it's battery-powered, it can be installed where there are no outlets and doesn't require electricity.
• Adjustable ambient brightness that the sensor detects and starts lighting
• 5 seconds on, 10 seconds on, and 10 seconds blinking lighting mode, selectable
• It is bright even though it is energy-saving because it is LED.
• Light with low infrared and low UV radiation that produces little heat and does not attract insects
• Flash feature
• Red LED blinks
• Wireless chime can be added (sold separately)
• With the included clamp, it can be mounted from a minimum width of approximately 10 mm to a maximum width of approximately 100 mm. The optional stainless steel band (Up to 10 mm wide and 0.5 mm thick) can be mounted up to 260 mm in diameter.
•