Spec

• Battery operated rainproof sensor light
• Detection method: Infrared passive
• Detection area: about 160 degrees, about 10 m
• Adjustment of irradiation direction: Up direction/about 30 degrees, Down direction/about 60 degrees, Outside/about 90 degrees, Inside/about 40 degrees movable (left and right movable independently)
• Power supply: 3 single alkaline batteries (sold separately)
• Battery life: About 23 months
• Light source: White LED (LED not replaceable)
• Total luminous flux: 350 lm
• Lit/blink holding time: 5 seconds lit, 10 seconds lit, 10 seconds blinking
• Lighting start illuminance: approx. 4 lx (night) to (day)
• Protection rating: IP 45 (jet proof type)
• Operating ambient temperature range: -20 to + 40 degrees C
• Size: approx. 88 (W) x 116 (D) x 186 (H) mm
• Weight: About 230 g (excluding rechargeable batteries)
• Accessories: 2 mounting screws, 2 concrete sleeves, 1 masking cover, 1 set of clamps, 1 diffusion panel
• Location: Indoor/outdoor
• Sensors detect movement of people and cars and turn on automatically
• Waterproof type that can be installed outdoors (IP 45 jet-proof type)
• Because it's battery-powered, it can be installed where there are no outlets and doesn't require electricity.
• Adjustable ambient brightness that the sensor detects and starts lighting
• 5 seconds on, 10 seconds on, and 10 seconds blinking lighting mode, selectable
• It is bright even though it is energy-saving because it is LED.
• Light with low infrared and low UV radiation that produces little heat and does not attract insects
• Flash feature
• Red LED blinks
• Wireless chime can be added (sold separately)
• Can be mounted from a minimum width of approximately 10 mm to a maximum width of approximately 100 mm with the included clamp. The optional stainless steel band (Up to 10 mm wide and 0.5 mm thick) can be mounted up to 260 mm in diameter.
•