Spec

• Detection area: 360 degrees/about 4 m
• Lighting and holding time: About 5 seconds to about 10 minutes
• Power supply: 100 VAC (50/60 Hz)
• Light source: White LED (LED not replaceable)
• Detection method: Infrared passive
• Accessories: 2 mounting screws, 2 concrete sleeves, 1 masking cover, 1 set of clamps, 2 diffusion panels
• Size: approx. 113 (W) x 116 (D) x 186 (H) mm
• Weight: about 770 g (including power cord)
• Radiation direction adjustment: Up direction/about 30 degrees, Down direction/about 60 degrees, Outside/about 90 degrees, Inside/about 40 degrees movable.
• Power consumption: approx. 21 W (approx. 0.2 W in standby mode)
• Total luminous flux: 2200 lm
• Lighting start illuminance: approx. 4 lx (night) to (day)
• Protection rating: IP 45 (jet proof type)
• Operating ambient temperature range: -20 to + 40 degrees C
• Power cord length: about 3.0 m
• Location: Indoor/outdoor
• Rainproof structure (IPX4)
• Sensors detect movement of people and cars and turn on automatically
• Waterproof type that can be installed outdoors (IP 45 jet-proof type)
• Adjustable ambient brightness that the sensor detects and starts lighting
• You can set the lighting time to your liking from about 5 seconds to 10 minutes. * Since this is an approximate setting, you can not make detailed settings.
• It is bright even though it is energy-saving because it is LED.
• Light with low infrared and low UV radiation that produces little heat and does not attract insects
• Double sensor
• Red LED blinks
• Wireless chime can be added (sold separately)
• Can be mounted from a minimum width of approximately 10 mm to a maximum width of approximately 100 mm with the included clamp. The optional stainless steel band (Up to 10 mm wide and 0.5 mm thick) can be mounted up to 260 mm in diameter.
•