Fukudaseiko

埋孔(六角形插座头螺栓，适用螺栓:M 3 x外径5.9 x导轨直径:3.2)

Fukudaseiko

长柄钻(六角形插座头螺栓，适用螺栓:M 3 x外径6.5 x导轨直径:3.2)

Fukudaseiko

埋孔(平面沉孔螺丝，外径7.5 x导轨直径:3.2 x总长度38)

Fukudaseiko

3 C铣削 (六角形插座头螺栓MC表面安装座刀具) 10 3 C 10 3 C　3C10

With the machining center, not only the flat part but also the part on the slope or curved surface which is difficult to enter the drill in the past, center rubbing, seat rolling and chamfering can be done in a single process.
Center massage.

Fukudaseiko

3 C铣削 (六角形插座头螺栓MC表面安装座刀具) 12 3 C 12 3 C　3C12

With the machining center, not only the flat part but also the part on the slope or curved surface which is difficult to enter the drill in the past, center rubbing, seat rolling and chamfering can be done in a single process.
Center massage.

Fukudaseiko

3 C铣削 (六角形插座头螺栓MC表面安装座刀具) 14 3 C 14 3 C　3C14

With the machining center, not only the flat part but also the part on the slope or curved surface which is difficult to enter the drill in the past, center rubbing, seat rolling and chamfering can be done in a single process.
Center massage.

Fukudaseiko

3 C铣削 (六角形插座头螺栓MC表面安装座刀具) 16 3 C 16 3 C　3C16

With the machining center, not only the flat part but also the part on the slope or curved surface which is difficult to enter the drill in the past, center rubbing, seat rolling and chamfering can be done in a single process.
Center massage.

Fukudaseiko

3CMills (六角形插口螺栓MC表面安装座刀具) 33C33C　3C3

With the machining center, not only the flat part but also the part on the slope or curved surface which is difficult to enter the drill in the past, center rubbing, seat rolling and chamfering can be done in a single process.
Center massage.

Fukudaseiko

3CMills (六角形插口螺栓MC表面安装座刀具) 43C43C　3C4

With the machining center, not only the flat part but also the part on the slope or curved surface which is difficult to enter the drill in the past, center rubbing, seat rolling and chamfering can be done in a single process.
Center massage.

Fukudaseiko

3CMills (六角形插口螺栓MC表面安装座刀具) 53C53C　3C5

With the machining center, not only the flat part but also the part on the slope or curved surface which is difficult to enter the drill in the past, center rubbing, seat rolling and chamfering can be done in a single process.
Center massage.

Fukudaseiko

3C磨粉机 (六角形插口螺栓MC表面安装座刀具) 63C63C　3C6

With the machining center, not only the flat part but also the part on the slope or curved surface which is difficult to enter the drill in the past, center rubbing, seat rolling and chamfering can be done in a single process.
Center massage.

Fukudaseiko

3C磨粉机 (六角形插口螺栓MC表面安装座刀具) 83C83C　3C8

With the machining center, not only the flat part but also the part on the slope or curved surface which is difficult to enter the drill in the past, center rubbing, seat rolling and chamfering can be done in a single process.
Center massage.

Fukudaseiko

埋孔 (锥柄) 10 CBT 10　CBT10

Milling for hexagon socket bolts.
The nominal dimensions are the same as those of the commercially available bolts with holes.

Fukudaseiko

埋孔 (锥柄) 12 CBT12　CBT12

Milling for hexagon socket bolts.
The nominal dimensions are the same as those of the commercially available bolts with holes.

Fukudaseiko

埋孔 (锥柄) 14 CBT 14　CBT14

Milling for hexagon socket bolts.
The nominal dimensions are the same as those of the commercially available bolts with holes.

Fukudaseiko

埋孔 (锥柄) 16 CBT16　CBT16

Milling for hexagon socket bolts.
The nominal dimensions are the same as those of the commercially available bolts with holes.

Fukudaseiko

埋孔 (锥柄) 18 CBT18　CBT18

Milling for hexagon socket bolts.
The nominal dimensions are the same as those of the commercially available bolts with holes.

Fukudaseiko

埋孔 (锥柄) 20 CBT 20　CBT20

Milling for hexagon socket bolts.
The nominal dimensions are the same as those of the commercially available bolts with holes.

Fukudaseiko

埋孔 (锥柄) 22 CBT22　CBT22

Milling for hexagon socket bolts.
The nominal dimensions are the same as those of the commercially available bolts with holes.

Fukudaseiko

埋孔 (锥柄) 24 CBT24　CBT24

Milling for hexagon socket bolts.
The nominal dimensions are the same as those of the commercially available bolts with holes.

Fukudaseiko

埋孔 (锥柄) 30 CBT 30　CBT30

Milling for hexagon socket bolts.
The nominal dimensions are the same as those of the commercially available bolts with holes.

Fukudaseiko

埋孔 (锥柄) 36 CBT36　CBT36

Milling for hexagon socket bolts.
The nominal dimensions are the same as those of the commercially available bolts with holes.

Fukudaseiko

埋孔 (锥柄) 42 CBT42　CBT42

Milling for hexagon socket bolts.
The nominal dimensions are the same as those of the commercially available bolts with holes.

Fukudaseiko

埋孔 (锥柄) 45 CBT45　CBT45

Milling for hexagon socket bolts.
The nominal dimensions are the same as those of the commercially available bolts with holes.

Fukudaseiko

埋孔 (锥柄) 48 CBT48　CBT48

Milling for hexagon socket bolts.
The nominal dimensions are the same as those of the commercially available bolts with holes.

Fukudaseiko

引脚埋孔10 EPCB10　EPCB10

Used for sinking holes in extrusion pins for plastic molds.
For extrusion pins.

Fukudaseiko

引脚埋孔12 EPCB12　EPCB12

Used for sinking holes in extrusion pins for plastic molds.
For extrusion pins.

Fukudaseiko

引脚埋孔14 EPCB14　EPCB14

Used for sinking holes in extrusion pins for plastic molds.
For extrusion pins.

Fukudaseiko

引脚埋孔16 EPCB16　EPCB16

Used for sinking holes in extrusion pins for plastic molds.
For extrusion pins.

Fukudaseiko

2EPCB2引脚　EPCB2

Used for sinking holes in extrusion pins for plastic molds.
For extrusion pins.

Fukudaseiko

引脚埋孔2.5EPCB2.5　EPCB2.5

Used for sinking holes in extrusion pins for plastic molds.
For extrusion pins.

Fukudaseiko

引脚埋孔3EPCB3　EPCB3

Used for sinking holes in extrusion pins for plastic molds.
For extrusion pins.

Fukudaseiko

引脚埋孔3.5EPCB3.5　EPCB3.5

Used for sinking holes in extrusion pins for plastic molds.
For extrusion pins.

Fukudaseiko

引脚埋孔4EPCB4　EPCB4

Used for sinking holes in extrusion pins for plastic molds.
For extrusion pins.

Fukudaseiko

引脚埋孔4.5EPCB4.5　EPCB4.5

Used for sinking holes in extrusion pins for plastic molds.
For extrusion pins.

Fukudaseiko

引脚埋孔5EPCB5　EPCB5

Used for sinking holes in extrusion pins for plastic molds.
For extrusion pins.

Fukudaseiko

引脚埋孔6EPCB6　EPCB6

Used for sinking holes in extrusion pins for plastic molds.
For extrusion pins.

Fukudaseiko

引脚埋孔7EPCB7　EPCB7

Used for sinking holes in extrusion pins for plastic molds.
For extrusion pins.

Fukudaseiko

引脚埋孔8EPCB8　EPCB8

Used for sinking holes in extrusion pins for plastic molds.
For extrusion pins.

Fukudaseiko

引脚埋孔9EPCB9　EPCB9

Used for sinking holes in extrusion pins for plastic molds.
For extrusion pins.