Fukudaseiko

手柄角度切割器(45°Φ10×叶片长度3.0×颈部直径:4)

Fukudaseiko

手柄角度切割器(60°Φ10×叶片长度5.2×颈部直径:4)

Fukudaseiko

T插槽端点(HSS,Φ15×叶片长度5×颈径:6.0)

Fukudaseiko

埋孔(六角形插座头螺栓，适用螺栓:M 3 x外径5.9 x导轨直径:3.2)

Fukudaseiko

长柄钻(六角形插座头螺栓，适用螺栓:M 3 x外径6.5 x导轨直径:3.2)

Fukudaseiko

埋孔(平面沉孔螺丝，外径7.5 x导轨直径:3.2 x总长度38)

Fukudaseiko

直柄钻(碳化物叶片，Φ3.0×叶片长度43×全长75 mm)

Fukudaseiko

薄柄钻(碳化物叶片，Φ14.0×叶片长度70×全长150 mm)

Fukudaseiko

锥形柄钻(碳化物叶片，Φ10.0 x叶片长度60×总长度140 mm)

Fukudaseiko

倒角铣削中心沉孔角度 (°) :90钻孔直径:4长度:75刀柄直径:8

Fukudaseiko

转角倒圆角端点0.5R

Fukudaseiko

攻牙的Endmill 2刀锋15°x3

Fukudaseiko

中心扩孔SKH51刀尖角度:60有效刀锋直径:6

Fukudaseiko

球端铣削2个刀片0.50 R 2 BE0.50R　2BE0.50R

It is most widely used for general copying and finishing of corner R.
Generic type ball end mill.

Fukudaseiko

球端铣削2个刀片0.55 R 2 BE0.55R　2BE0.55R

It is most widely used for general copying and finishing of corner R.
Generic type ball end mill.

Fukudaseiko

球端铣削2个刀片0.60 R 2 BE 0.60R　2BE0.60R

It is most widely used for general copying and finishing of corner R.
Generic type ball end mill.

Fukudaseiko

球端铣削2个刀锋0.65 R 2 BE 0.65R　2BE0.65R

It is most widely used for general copying and finishing of corner R.
Generic type ball end mill.

Fukudaseiko

球端铣削2个刀片0.70 R 2 BE 0.70R　2BE0.70R

It is most widely used for general copying and finishing of corner R.
Generic type ball end mill.

Fukudaseiko

球端铣削2个刀片0.75 R 2 BE 0.75R　2BE0.75R

It is most widely used for general copying and finishing of corner R.
Generic type ball end mill.

Fukudaseiko

球端铣削2个刀片0.80 R 2 BE 0.80R　2BE0.80R

It is most widely used for general copying and finishing of corner R.
Generic type ball end mill.

Fukudaseiko

球端铣削2个刀片0.85 R 2 BE 0.85R　2BE0.85R

It is most widely used for general copying and finishing of corner R.
Generic type ball end mill.

Fukudaseiko

球端铣削2个刀片0.90 R 2 BE0.90R　2BE0.90R

It is most widely used for general copying and finishing of corner R.
Generic type ball end mill.

Fukudaseiko

球端铣削2个刀片0.95 R 2 BE 0.95R　2BE0.95R

It is most widely used for general copying and finishing of corner R.
Generic type ball end mill.

Fukudaseiko

球端铣削2个刀片1.00 R 2BE1.00R　2BE1.00R

It is most widely used for general copying and finishing of corner R.
Generic type ball end mill.

Fukudaseiko

球端铣削2个刀片1.05 R 2 BE 1.05R　2BE1.05R

It is most widely used for general copying and finishing of corner R.
Generic type ball end mill.

Fukudaseiko

球端铣削2个刀片1.10 R 2 BE1.10R　2BE1.10R

It is most widely used for general copying and finishing of corner R.
Generic type ball end mill.

Fukudaseiko

球端铣削2个刀片1.15 R 2 BE 1.15R　2BE1.15R

It is most widely used for general copying and finishing of corner R.
Generic type ball end mill.

Fukudaseiko

球端铣削2个刀片1.20 R 2 BE1.20R　2BE1.20R

It is most widely used for general copying and finishing of corner R.
Generic type ball end mill.

Fukudaseiko

球端铣削2个刀片1.25 R 2 BE1.25R　2BE1.25R

It is most widely used for general copying and finishing of corner R.
Generic type ball end mill.

Fukudaseiko

球端铣削2个刀锋1.30 R 2 BE 1.30R　2BE1.30R

It is most widely used for general copying and finishing of corner R.
Generic type ball end mill.

Fukudaseiko

球端铣削2个刀片1.35 R 2BE1.35R　2BE1.35R

It is most widely used for general copying and finishing of corner R.
Generic type ball end mill.

Fukudaseiko

球端铣削2个刀片1.40 R 2 BE1.40R　2BE1.40R

It is most widely used for general copying and finishing of corner R.
Generic type ball end mill.

Fukudaseiko

球端铣削2个刀片1.45 R 2 BE 1.45R　2BE1.45R

It is most widely used for general copying and finishing of corner R.
Generic type ball end mill.

Fukudaseiko

球端铣削2个刀片1.50 R 2 BE1.50R　2BE1.50R

It is most widely used for general copying and finishing of corner R.
Generic type ball end mill.

Fukudaseiko

球端铣削2个刀片1.55 R 2 BE1.55R　2BE1.55R

It is most widely used for general copying and finishing of corner R.
Generic type ball end mill.

Fukudaseiko

球端铣削2个刀片1.60 R 2 BE1.60R　2BE1.60R

It is most widely used for general copying and finishing of corner R.
Generic type ball end mill.

Fukudaseiko

球端铣削2个刀锋1.65 R 2 BE1.65R　2BE1.65R

It is most widely used for general copying and finishing of corner R.
Generic type ball end mill.

Fukudaseiko

球端铣削2个刀片1.70 R 2 BE1.70R　2BE1.70R

It is most widely used for general copying and finishing of corner R.
Generic type ball end mill.

Fukudaseiko

球端铣削2个刀片1.75 R 2 BE1.75R　2BE1.75R

It is most widely used for general copying and finishing of corner R.
Generic type ball end mill.

Fukudaseiko

球端铣削2个刀片1.80 R 2 BE1.80R　2BE1.80R

It is most widely used for general copying and finishing of corner R.
Generic type ball end mill.