61-1346-21 GP碳化物钻头(ALT涂层，标准，Φ0.59×叶片长度6×全长40 mm) GPDR059CBALT
功能
- Carbide small-diameter coating drill with ultra-high speed, long life, and hole drilling realized by unique cutting edge shape (patented: Patent No. 5800477) and groove shape.
- The two-step angle at the tip significantly reduces shoulder wear and blurring compared to conventional drills, and greatly improves performance not only in high-speed use.
- The unique groove shape significantly increases the efficiency of chip removal during high feed, and also prevents breakage of the drill due to shoulder chipping, not only during high-speed use.
- Work Material: Carbon Steel, Alloy Steel, Stainless Steel, Mild Steel, Tempered Steel, Cast Iron, Tag Tile Cast Iron, Tool Steel (~HRC40), Titanium Alloy.
规格
- 叶片直径 (mm) :0.59
- 长笛长度 (mm) :6
- 长度 (mm) :40
- 树干直径 (mm) :3
- 表面处理:ALT涂层
- 有效处理深度:10D (刀锋直径x 10倍)
- 硬质合金 (碳化物)
- 应用:工件:碳钢、合金钢、不锈钢、低碳钢、钢、铸铁、标签瓦铸铁件、碳工具钢 (HRC40) 、钛合金。
- 原籍国:日本
- 制造商型号:GPDR0。小行星59CBALT
- 代码编号:475-1001
封装大小：12×68×11 mm 10 g [关于封装大小]
| 第号命令。 | 61-1346-21 | |
|---|---|---|
| 型号号。 | GPDR059CBALT | |
| JAN代码 | 4562186864754 | |
| 标准价格 |
JPY: 5,150
USD: 32.28
Excange rate 1USD= 159.53JPY
Valid price in Japan |
|
| 数量 | 1piece | |
| 日本股票 |
|
|
| 供应商存货 |
|
|
产品种类 （尺寸不同·规格不同·选配品等）
| 产品图像 | 第号命令。 | 名称 | 型号号。 |
Blade diameter |
Groove length |
数量 | 标准价格 | 日本的有效价格 | 股票 [供应商存货] |
|
|---|---|---|---|---|---|---|---|---|---|---|
 |
61-1345-91 | GP碳化物钻头(ALT涂层，标准，Φ0.3×叶片长度3.6×全长40 mm) GPDR03CBALT | GPDR03CBALT | 0.3mm | 3.6mm | 1piece | JPY: 4,630 | USD: 29.02 |
|
|
 |
61-1345-92 | GP碳化物钻头(ALT涂层，一般，Φ0.31×刀锋长度3.6×总长40 mm) GPDR031CBALT | GPDR031CBALT | 0.31mm | 3.6mm | 1piece | JPY: 5,660 | USD: 35.48 |
|
|
 |
61-1345-93 | GP碳化物钻头(ALT涂层，一般，Φ0.32×刀锋长度3.6×总长40 mm) GPDR032CBALT | GPDR032CBALT | 0.32mm | 3.6mm | 1piece | JPY: 5,660 | USD: 35.48 |
|
|
 |
61-1345-94 | GP碳化物钻头(ALT涂层，一般，Φ0.33×刀锋长度3.6×总长40 mm) GPDR033CBALT | GPDR033CBALT | 0.33mm | 3.6mm | 1piece | JPY: 5,660 | USD: 35.48 |
|
|
 |
61-1345-95 | GP碳化物钻头(ALT涂层，一般，Φ0.34×刀锋长度3.6×总长40 mm) GPDR034CBALT | GPDR034CBALT | 0.34mm | 3.6mm | 1piece | JPY: 5,660 | USD: 35.48 |
|
|
 |
61-1345-96 | GP碳化物钻头(ALT涂层，一般，Φ0.35×刀锋长度4.2×总长40 mm) GPDR035CBALT | GPDR035CBALT | 0.35mm | 4.2mm | 1piece | JPY: 5,660 | USD: 35.48 |
|
|
 |
61-1345-97 | GP碳化物钻头(ALT涂层，一般，Φ0.36×刀锋长度4.2×总长40 mm) GPDR036CBALT | GPDR036CBALT | 0.36mm | 4.2mm | 1piece | JPY: 5,660 | USD: 35.48 |
|
|
 |
61-1345-98 | GP碳化物钻头(ALT涂层，一般，Φ0.37×刀锋长度4.2×总长40 mm) GPDR037CBALT | GPDR037CBALT | 0.37mm | 4.2mm | 1piece | JPY: 5,660 | USD: 35.48 |
|
|
 |
61-1345-99 | GP碳化物钻头(ALT涂层，一般，Φ0.38*刀锋长度4.2 x全长40 mm) GPDR038CBALT | GPDR038CBALT | 0.38mm | 4.2mm | 1piece | JPY: 5,660 | USD: 35.48 |
|
|
 |
61-1346-01 | GP碳化物钻头(ALT涂层，一般，Φ0.39×刀锋长度4.2×总长40 mm) GPDR039CBALT | GPDR039CBALT | 0.39mm | 4.2mm | 1piece | JPY: 5,660 | USD: 35.48 |
|
|
 |
61-1346-02 | GP碳化物钻头(ALT涂层，一般，Φ0.4*刀锋长度4.8 x全长40 mm) GPDR04CBALT | GPDR04CBALT | 0.4mm | 4.8mm | 1piece | JPY: 4,630 | USD: 29.02 |
|
|
 |
61-1346-03 | GP碳化物钻头(ALT涂层，一般，Φ0.41×刀锋长度4.8×总长40 mm) GPDR041CBALT | GPDR041CBALT | 0.41mm | 4.8mm | 1piece | JPY: 5,660 | USD: 35.48 |
|
|
 |
61-1346-04 | GP碳化物钻头(ALT涂层，一般，Φ0.42×刀锋长度4.8×总长40 mm) GPDR042CBALT | GPDR042CBALT | 0.42mm | 4.8mm | 1piece | JPY: 5,660 | USD: 35.48 |
|
|
 |
61-1346-05 | GP碳化物钻头(ALT涂层，一般，Φ0.43×刀锋长度4.8×总长40 mm) GPDR043CBALT | GPDR043CBALT | 0.43mm | 4.8mm | 1piece | JPY: 5,660 | USD: 35.48 |
|
|
 |
61-1346-06 | GP碳化物钻头(ALT涂层，一般，Φ0.44×刀锋长度4.8×总长40 mm) GPDR044CBALT | GPDR044CBALT | 0.44mm | 4.8mm | 1piece | JPY: 5,660 | USD: 35.48 |
|
|
 |
61-1346-07 | GP碳化物钻头(ALT涂层，一般，Φ0.45×刀锋长度5.4×总长40 mm) GPDR045CBALT | GPDR045CBALT | 0.45mm | 5.4mm | 1piece | JPY: 5,660 | USD: 35.48 |
|
|
 |
61-1346-08 | GP碳化物钻头(ALT涂层，一般，Φ0.46×刀锋长度5.4×总长40 mm) GPDR046CBALT | GPDR046CBALT | 0.46mm | 5.4mm | 1piece | JPY: 5,660 | USD: 35.48 |
|
|
 |
61-1346-09 | GP碳化物钻头(ALT涂层，一般，Φ0.47×刀锋长度5.4×总长40 mm) GPDR047CBALT | GPDR047CBALT | 0.47mm | 5.4mm | 1piece | JPY: 5,660 | USD: 35.48 |
|
|
 |
61-1346-10 | GP碳化物钻头(ALT涂层，一般，Φ0.48×刀锋长度5.4×总长40 mm) GPDR048CBALT | GPDR048CBALT | 0.48mm | 5.4mm | 1piece | JPY: 5,660 | USD: 35.48 |
|
|
 |
61-1346-11 | GP碳化物钻头(ALT涂层，一般，Φ0.49×刀锋长度5.4×总长40 mm) GPDR049CBALT | GPDR049CBALT | 0.49mm | 5.4mm | 1piece | JPY: 5,660 | USD: 35.48 |
|
|
 |
61-1346-12 | GP碳化物钻头(ALT涂层，标准，Φ0.5×叶片长度6×全长40 mm) GPDR05CBALT | GPDR05CBALT | 0.5mm | 6mm | 1piece | JPY: 4,120 | USD: 25.83 |
|
|
 |
61-1346-13 | GP碳化物钻头(ALT涂层，标准，Φ0.51×叶片长度6×全长40 mm) GPDR051CBALT | GPDR051CBALT | 0.51mm | 6mm | 1piece | JPY: 5,150 | USD: 32.28 |
|
|
 |
61-1346-14 | GP碳化物钻头(ALT涂层，标准，Φ0.52×叶片长度6×全长40 mm) GPDR052CBALT | GPDR052CBALT | 0.52mm | 6mm | 1piece | JPY: 5,150 | USD: 32.28 |
|
|
 |
61-1346-15 | GP碳化物钻头(ALT涂层，标准，Φ0.53×叶片长度6×全长40 mm) GPDR053CBALT | GPDR053CBALT | 0.53mm | 6mm | 1piece | JPY: 5,150 | USD: 32.28 |
|
|
 |
61-1346-16 | GP碳化物钻头(ALT涂层，标准，Φ0.54×叶片长度6×全长40 mm) GPDR054CBALT | GPDR054CBALT | 0.54mm | 6mm | 1piece | JPY: 5,150 | USD: 32.28 |
|
|
 |
61-1346-17 | GP碳化物钻头(ALT涂层，标准，Φ0.55×叶片长度6×全长40 mm) GPDR055CBALT | GPDR055CBALT | 0.55mm | 6mm | 1piece | JPY: 5,150 | USD: 32.28 |
|
|
 |
61-1346-18 | GP碳化物钻头(ALT涂层，标准，Φ0.56×叶片长度6×全长40 mm) GPDR056CBALT | GPDR056CBALT | 0.56mm | 6mm | 1piece | JPY: 5,150 | USD: 32.28 |
|
|
 |
61-1346-19 | GP碳化物钻头(ALT涂层，标准，Φ0.57×叶片长度6×全长40 mm) GPDR057CBALT | GPDR057CBALT | 0.57mm | 6mm | 1piece | JPY: 5,150 | USD: 32.28 |
|
|
 |
61-1346-20 | GP碳化物钻头(ALT涂层，标准，Φ0.58×刀锋长度6×全长40 mm) GPDR058CBALT | GPDR058CBALT | 0.58mm | 6mm | 1piece | JPY: 5,150 | USD: 32.28 |
|
|
 |
61-1346-21 | GP碳化物钻头(ALT涂层，标准，Φ0.59×叶片长度6×全长40 mm) GPDR059CBALT | GPDR059CBALT | 0.59mm | 6mm | 1piece | JPY: 5,150 | USD: 32.28 |
|
|
 |
61-1346-22 | GP碳化物钻头(ALT涂层，一般，Φ0.6×叶片长度7.2×全长40 mm) GPDR06CBALT | GPDR06CBALT | 0.6mm | 7.2mm | 1piece | JPY: 4,120 | USD: 25.83 |
|
|
 |
61-1346-23 | GP碳化物钻头(ALT涂层，一般，Φ0.61×刀锋长度7.2×总长40 mm) GPDR061CBALT | GPDR061CBALT | 0.61mm | 7.2mm | 1piece | JPY: 5,150 | USD: 32.28 |
|
|
 |
61-1346-24 | GP碳化物钻头(ALT涂层，一般，Φ0.62×刀锋长度7.2×总长40 mm) GPDR062CBALT | GPDR062CBALT | 0.62mm | 7.2mm | 1piece | JPY: 5,150 | USD: 32.28 |
|
|
 |
61-1346-25 | GP碳化物钻头(ALT涂层，一般，Φ0.63×刀锋长度7.2×总长40 mm) GPDR063CBALT | GPDR063CBALT | 0.63mm | 7.2mm | 1piece | JPY: 5,150 | USD: 32.28 |
|
|
 |
61-1346-26 | GP碳化物钻头(ALT涂层，一般，Φ0.64×刀锋长度7.2×总长40 mm) GPDR064CBALT | GPDR064CBALT | 0.64mm | 7.2mm | 1piece | JPY: 5,150 | USD: 32.28 |
|
|
 |
61-1346-27 | GP碳化物钻头(ALT涂层，一般，Φ0.65×刀锋长度7.2×总长40 mm) GPDR065CBALT | GPDR065CBALT | 0.65mm | 7.2mm | 1piece | JPY: 5,150 | USD: 32.28 |
|
|
 |
61-1346-28 | GP碳化物钻头(ALT涂层，一般，Φ0.66×刀锋长度7.2×总长40 mm) GPDR066CBALT | GPDR066CBALT | 0.66mm | 7.2mm | 1piece | JPY: 5,150 | USD: 32.28 |
|
|
 |
61-1346-29 | GP碳化物钻头(ALT涂层，一般，Φ0.67×刀锋长度7.2×总长40 mm) GPDR067CBALT | GPDR067CBALT | 0.67mm | 7.2mm | 1piece | JPY: 5,150 | USD: 32.28 |
|
|
 |
61-1346-30 | GP碳化物钻头(ALT涂层，一般，Φ0.68×刀锋长度7.2×总长40 mm) GPDR068CBALT | GPDR068CBALT | 0.68mm | 7.2mm | 1piece | JPY: 5,150 | USD: 32.28 |
|
|
 |
61-1346-31 | GP碳化物钻头(ALT涂层，一般，Φ0.69×刀锋长度7.2×总长40 mm) GPDR069CBALT | GPDR069CBALT | 0.69mm | 7.2mm | 1piece | JPY: 5,150 | USD: 32.28 |
|
|
 |
61-1346-32 | GP碳化物钻头(ALT涂层，一般，Φ0.7×刀锋长度8.4×总长40 mm) GPDR07CBALT | GPDR07CBALT | 0.7mm | 8.4mm | 1piece | JPY: 4,120 | USD: 25.83 |
|
|
 |
61-1346-33 | GP碳化物钻头(ALT涂层，一般，Φ0.71×刀锋长度8.4×总长40 mm) GPDR071CBALT | GPDR071CBALT | 0.71mm | 8.4mm | 1piece | JPY: 5,150 | USD: 32.28 |
|
|
 |
61-1346-34 | GP碳化物钻头(ALT涂层，一般，Φ0.72×刀锋长度8.4×总长40 mm) GPDR072CBALT | GPDR072CBALT | 0.72mm | 8.4mm | 1piece | JPY: 5,150 | USD: 32.28 |
|
|
 |
61-1346-35 | GP碳化物钻头(ALT涂层，一般，Φ0.73×刀锋长度8.4×总长40 mm) GPDR073CBALT | GPDR073CBALT | 0.73mm | 8.4mm | 1piece | JPY: 5,150 | USD: 32.28 |
|
|
 |
61-1346-36 | GP碳化物钻头(ALT涂层，一般，Φ0.74×刀锋长度8.4×总长40 mm) GPDR074CBALT | GPDR074CBALT | 0.74mm | 8.4mm | 1piece | JPY: 5,150 | USD: 32.28 |
|
|
 |
61-1346-37 | GP碳化物钻头(ALT涂层，一般，Φ0.75×刀锋长度8.4×总长40 mm) GPDR075CBALT | GPDR075CBALT | 0.75mm | 8.4mm | 1piece | JPY: 5,150 | USD: 32.28 |
|
|
 |
61-1346-38 | GP碳化物钻头(ALT涂层，一般，Φ0.76×刀锋长度8.4×总长40 mm) GPDR076CBALT | GPDR076CBALT | 0.76mm | 8.4mm | 1piece | JPY: 5,150 | USD: 32.28 |
|
|
 |
61-1346-39 | GP碳化物钻头(ALT涂层，一般，Φ0.77×刀锋长度8.4×总长40 mm) GPDR077CBALT | GPDR077CBALT | 0.77mm | 8.4mm | 1piece | JPY: 5,150 | USD: 32.28 |
|
|
 |
61-1346-40 | GP碳化物钻头(ALT涂层，一般，Φ0.78×刀锋长度8.4×总长40 mm) GPDR078CBALT | GPDR078CBALT | 0.78mm | 8.4mm | 1piece | JPY: 5,150 | USD: 32.28 |
|
|
 |
61-1346-41 | GP碳化物钻头(ALT涂层，一般，Φ0.79×刀锋长度8.4×总长40 mm) GPDR079CBALT | GPDR079CBALT | 0.79mm | 8.4mm | 1piece | JPY: 5,150 | USD: 32.28 |
|
|
 |
61-1346-42 | GP碳化物钻头(ALT涂层，一般，Φ0.8×刀锋长度9.6×总长40 mm) GPDR08CBALT | GPDR08CBALT | 0.8mm | 9.6mm | 1piece | JPY: 4,120 | USD: 25.83 |
|
|
 |
61-1346-43 | GP碳化物钻头(ALT涂层，一般，Φ0.81×刀锋长度9.6×总长40 mm) GPDR081CBALT | GPDR081CBALT | 0.81mm | 9.6mm | 1piece | JPY: 5,150 | USD: 32.28 |
|
|
 |
61-1346-44 | GP碳化物钻头(ALT涂层，一般，Φ0.82×刀锋长度9.6×总长40 mm) GPDR082CBALT | GPDR082CBALT | 0.82mm | 9.6mm | 1piece | JPY: 5,150 | USD: 32.28 |
|
|
 |
61-1346-45 | GP碳化物钻头(ALT涂层，一般，Φ0.83×刀锋长度9.6×全长40 mm) GPDR083CBALT | GPDR083CBALT | 0.83mm | 9.6mm | 1piece | JPY: 5,150 | USD: 32.28 |
|
|
 |
61-1346-46 | GP碳化物钻头(ALT涂层，一般，Φ0.84×刀锋长度9.6×总长40 mm) GPDR084CBALT | GPDR084CBALT | 0.84mm | 9.6mm | 1piece | JPY: 5,150 | USD: 32.28 |
|
|
 |
61-1346-47 | GP碳化物钻头(ALT涂层，一般，Φ0.85*刀锋长度9.6 x全长40 mm) GPDR085CBALT | GPDR085CBALT | 0.85mm | 9.6mm | 1piece | JPY: 5,150 | USD: 32.28 |
|
|
 |
61-1346-48 | GP碳化物钻头(ALT涂层，一般，Φ0.86×刀锋长度9.6×总长40 mm) GPDR086CBALT | GPDR086CBALT | 0.86mm | 9.6mm | 1piece | JPY: 5,150 | USD: 32.28 |
|
|
 |
61-1346-49 | GP碳化物钻头(ALT涂层，一般，Φ0.87×刀锋长度9.6×总长40 mm) GPDR087CBALT | GPDR087CBALT | 0.87mm | 9.6mm | 1piece | JPY: 5,150 | USD: 32.28 |
|
|
 |
61-1346-50 | GP碳化物钻头(ALT涂层，一般，Φ0.88×刀锋长度9.6×总长40 mm) GPDR088CBALT | GPDR088CBALT | 0.88mm | 9.6mm | 1piece | JPY: 5,150 | USD: 32.28 |
|
|
 |
61-1346-51 | GP碳化物钻头(ALT涂层，一般，Φ0.89×刀锋长度9.6×总长40 mm) GPDR089CBALT | GPDR089CBALT | 0.89mm | 9.6mm | 1piece | JPY: 5,150 | USD: 32.28 |
|
|
 |
61-1346-52 | GP碳化物钻头(ALT涂层，一般，Φ0.9×刀锋长度10.8×总长40 mm) GPDR09CBALT | GPDR09CBALT | 0.9mm | 10.8mm | 1piece | JPY: 4,120 | USD: 25.83 |
|
|
 |
61-1346-53 | GP碳化物钻头(ALT涂层，一般，Φ0.91×刀锋长度10.8×总长40 mm) GPDR091CBALT | GPDR091CBALT | 0.91mm | 10.8mm | 1piece | JPY: 5,150 | USD: 32.28 |
|
|
 |
61-1346-54 | GP碳化物钻头(ALT涂层，一般，Φ0.92×刀锋长度10.8×总长40 mm) GPDR092CBALT | GPDR092CBALT | 0.92mm | 10.8mm | 1piece | JPY: 5,150 | USD: 32.28 |
|
|
 |
61-1346-55 | GP碳化物钻头(ALT涂层，一般，Φ0.93×刀锋长度10.8×总长40 mm) GPDR093CBALT | GPDR093CBALT | 0.93mm | 10.8mm | 1piece | JPY: 5,150 | USD: 32.28 |
|
|
 |
61-1346-56 | GP碳化物钻头(ALT涂层，一般，Φ0.94×刀锋长度10.8×总长40 mm) GPDR094CBALT | GPDR094CBALT | 0.94mm | 10.8mm | 1piece | JPY: 5,150 | USD: 32.28 |
|
|
 |
61-1346-57 | GP碳化物钻头(ALT涂层，一般，Φ0.95×刀锋长度10.8×总长40 mm) GPDR095CBALT | GPDR095CBALT | 0.95mm | 10.8mm | 1piece | JPY: 5,150 | USD: 32.28 |
|
|
 |
61-1346-58 | GP碳化物钻头(ALT涂层，一般，Φ0.96×刀锋长度10.8×总长40 mm) GPDR096CBALT | GPDR096CBALT | 0.96mm | 10.8mm | 1piece | JPY: 5,150 | USD: 32.28 |
|
|
 |
61-1346-59 | GP碳化物钻头(ALT涂层，一般，Φ0.97×刀锋长度10.8×总长40 mm) GPDR097CBALT | GPDR097CBALT | 0.97mm | 10.8mm | 1piece | JPY: 5,150 | USD: 32.28 |
|
|
 |
61-1346-60 | GP碳化物钻头(ALT涂层，一般，Φ0.98×刀锋长度10.8×总长40 mm) GPDR098CBALT | GPDR098CBALT | 0.98mm | 10.8mm | 1piece | JPY: 5,150 | USD: 32.28 |
|
|
 |
61-1346-61 | GP碳化物钻头(ALT涂层，一般，Φ0.99×刀锋长度10.8×总长40 mm) GPDR099CBALT | GPDR099CBALT | 0.99mm | 10.8mm | 1piece | JPY: 5,150 | USD: 32.28 |
|
|
 |
61-1346-62 | GP碳化物钻头(ALT涂层，一般，Φ1.0*刀锋长度12 x总长度50 mm) GPDR1CBALT | GPDR1CBALT | 1mm | 12mm | 1piece | JPY: 4,120 | USD: 25.83 |
|
|
 |
61-1346-63 | GP碳化物钻头(ALT涂层，一般，Φ1.05×刀锋长度12×总长50 mm) GPDR105CBALT | GPDR105CBALT | 1.05mm | 12mm | 1piece | JPY: 5,660 | USD: 35.48 |
|
|
 |
61-1346-64 | GP碳化物钻头(ALT涂层，一般，Φ1.1×刀锋长度12×总长50 mm) GPDR11CBALT | GPDR11CBALT | 1.1mm | 12mm | 1piece | JPY: 4,630 | USD: 29.02 |
|
|
 |
61-1346-65 | GP碳化物钻头(ALT涂层，一般，Φ1.15×刀锋长度12×总长50 mm) GPDR115CBALT | GPDR115CBALT | 1.15mm | 12mm | 1piece | JPY: 5,660 | USD: 35.48 |
|
|
 |
61-1346-66 | GP碳化物钻头(ALT涂层，一般，Φ1.2×刀锋长度14.4×总长50 mm) GPDR12CBALT | GPDR12CBALT | 1.2mm | 14.4mm | 1piece | JPY: 4,630 | USD: 29.02 |
|
|
 |
61-1346-67 | GP碳化物钻头(ALT涂层，一般，Φ1.25×刀锋长度14.4×总长50 mm) GPDR125CBALT | GPDR125CBALT | 1.25mm | 14.4mm | 1piece | JPY: 5,660 | USD: 35.48 |
|
|
 |
61-1346-68 | GP碳化物钻头(ALT涂层，一般，Φ1.3×刀锋长度14.4×总长50 mm) GPDR13CBALT | GPDR13CBALT | 1.3mm | 14.4mm | 1piece | JPY: 4,630 | USD: 29.02 |
|
|
 |
61-1346-69 | GP碳化物钻头(ALT涂层，一般，Φ1.35×刀锋长度14.4×总长50 mm) GPDR135CBALT | GPDR135CBALT | 1.35mm | 14.4mm | 1piece | JPY: 5,660 | USD: 35.48 |
|
|
 |
61-1346-70 | GP碳化物钻头(ALT涂层，一般，Φ1.4×刀锋长度16.8×总长50 mm) GPDR14CBALT | GPDR14CBALT | 1.4mm | 16.8mm | 1piece | JPY: 4,630 | USD: 29.02 |
|
|
 |
61-1346-71 | GP碳化物钻头(ALT涂层，一般，Φ1.45×刀锋长度16.8×总长50 mm) GPDR145CBALT | GPDR145CBALT | 1.45mm | 16.8mm | 1piece | JPY: 5,660 | USD: 35.48 |
|
|
 |
61-1346-72 | GP碳化物钻头(ALT涂层，一般，Φ1.5×刀锋长度16.8×总长50 mm) GPDR15CBALT | GPDR15CBALT | 1.5mm | 16.8mm | 1piece | JPY: 4,630 | USD: 29.02 |
|
|
 |
61-1346-73 | GP碳化物钻头(ALT涂层，一般，Φ1.55×刀锋长度16.8×总长50 mm) GPDR155CBALT | GPDR155CBALT | 1.55mm | 16.8mm | 1piece | JPY: 5,660 | USD: 35.48 |
|
|
 |
61-1346-74 | GP碳化物钻头(ALT涂层，一般，Φ1.6×刀锋长度19.2×总长50 mm) GPDR16CBALT | GPDR16CBALT | 1.6mm | 19.2mm | 1piece | JPY: 4,630 | USD: 29.02 |
|
|
 |
61-1346-75 | GP碳化物钻头(ALT涂层，一般，Φ1.65×刀锋长度19.2×总长50 mm) GPDR165CBALT | GPDR165CBALT | 1.65mm | 19.2mm | 1piece | JPY: 5,660 | USD: 35.48 |
|
|
 |
61-1346-76 | GP碳化物钻头(ALT涂层，一般，Φ1.7×刀锋长度19.2×总长50 mm) GPDR17CBALT | GPDR17CBALT | 1.7mm | 19.2mm | 1piece | JPY: 4,630 | USD: 29.02 |
|
|
 |
61-1346-77 | GP碳化物钻头(ALT涂层，一般，Φ1.75×刀锋长度19.2×总长50 mm) GPDR175CBALT | GPDR175CBALT | 1.75mm | 19.2mm | 1piece | JPY: 5,660 | USD: 35.48 |
|
|
 |
61-1346-78 | GP碳化物钻头(ALT涂层，一般，Φ1.8×刀锋长度21.6×总长50 mm) GPDR18CBALT | GPDR18CBALT | 1.8mm | 21.6mm | 1piece | JPY: 4,630 | USD: 29.02 |
|
|
 |
61-1346-79 | GP碳化物钻头(ALT涂层，一般，Φ1.85*刀锋长度21.6 x全长50 mm) GPDR185CBALT | GPDR185CBALT | 1.85mm | 21.6mm | 1piece | JPY: 5,660 | USD: 35.48 |
|
|
 |
61-1346-80 | GP碳化物钻头(ALT涂层，一般，Φ1.9×刀锋长度21.6×总长50 mm) GPDR19CBALT | GPDR19CBALT | 1.9mm | 21.6mm | 1piece | JPY: 4,630 | USD: 29.02 |
|
|
 |
61-1346-81 | GP碳化物钻头(ALT涂层，一般，Φ1.95*刀锋长度21.6 x全长50 mm) GPDR195CBALT | GPDR195CBALT | 1.95mm | 21.6mm | 1piece | JPY: 5,660 | USD: 35.48 |
|
|
 |
61-1346-82 | GP碳化物钻头(ALT涂层，一般，Φ2.0×刀锋长度24×总长60 mm) GPDR2CBALT | GPDR2CBALT | 2mm | 24mm | 1piece | JPY: 4,630 | USD: 29.02 |
|
|
 |
61-1346-83 | GP碳化物钻头(ALT涂层，一般，Φ2.05×刀锋长度24×总长60 mm) GPDR205CBALT | GPDR205CBALT | 2.05mm | 24mm | 1piece | JPY: 6,180 | USD: 38.74 |
|
|
 |
61-1346-84 | GP碳化物钻头(ALT涂层，标准，Φ2.1×刀锋长度24×总长60 mm) GPDR21CBALT | GPDR21CBALT | 2.1mm | 24mm | 1piece | JPY: 5,150 | USD: 32.28 |
|
|
 |
61-1346-85 | GP碳化物钻头(ALT涂层，一般，Φ2.15×刀锋长度24×总长60 mm) GPDR215CBALT | GPDR215CBALT | 2.15mm | 24mm | 1piece | JPY: 6,180 | USD: 38.74 |
|
|
 |
61-1346-86 | GP碳化物钻头(ALT涂层，标准，Φ2.2×刀锋长度24×总长60 mm) GPDR22CBALT | GPDR22CBALT | 2.2mm | 24mm | 1piece | JPY: 5,150 | USD: 32.28 |
|
|
 |
61-1346-87 | GP碳化物钻头(ALT涂层，一般，Φ2.25×刀锋长度24×总长60 mm) GPDR225CBALT | GPDR225CBALT | 2.25mm | 24mm | 1piece | JPY: 6,180 | USD: 38.74 |
|
|
 |
61-1346-88 | GP碳化物钻头(ALT涂层，一般，Φ2.3×叶片长度27.6×全长60 mm) GPDR23CBALT | GPDR23CBALT | 2.3mm | 27.6mm | 1piece | JPY: 5,660 | USD: 35.48 |
|
|
 |
61-1346-89 | GP碳化物钻头(ALT涂层，一般，Φ2.35×刀锋长度27.6×总长60 mm) GPDR235CBALT | GPDR235CBALT | 2.35mm | 27.6mm | 1piece | JPY: 6,690 | USD: 41.94 |
|
|
 |
61-1346-90 | GP碳化物钻头(ALT涂层，一般，Φ2.4×刀锋长度27.6×总长60 mm) GPDR24CBALT | GPDR24CBALT | 2.4mm | 27.6mm | 1piece | JPY: 5,660 | USD: 35.48 |
|
|
 |
61-1346-91 | GP碳化物钻头(ALT涂层，标准，Φ2.45×刀锋长度27.6×总长60 mm) GPDR245CBALT | GPDR245CBALT | 2.45mm | 27.6mm | 1piece | JPY: 6,690 | USD: 41.94 |
|
|
 |
61-1346-92 | GP碳化物钻头(ALT涂层，一般，Φ2.5×刀锋长度27.6×总长60 mm) GPDR25CBALT | GPDR25CBALT | 2.5mm | 27.6mm | 1piece | JPY: 5,660 | USD: 35.48 |
|
|
 |
61-1346-93 | GP碳化物钻头(ALT涂层，一般，Φ2.55×刀锋长度27.6×总长60 mm) GPDR255CBALT | GPDR255CBALT | 2.55mm | 27.6mm | 1piece | JPY: 6,690 | USD: 41.94 |
|
|
 |
61-1346-94 | GP碳化物钻头(ALT涂层，一般，Φ2.6×叶片长度31.2×全长60 mm) GPDR26CBALT | GPDR26CBALT | 2.6mm | 31.2mm | 1piece | JPY: 5,660 | USD: 35.48 |
|
|
 |
61-1346-95 | GP碳化物钻头(ALT涂层，一般，Φ2.65×刀锋长度31.2×总长60 mm) GPDR265CBALT | GPDR265CBALT | 2.65mm | 31.2mm | 1piece | JPY: 6,690 | USD: 41.94 |
|
|
 |
61-1346-96 | GP碳化物钻头(ALT涂层，一般，Φ2.7×刀锋长度31.2×总长60 mm) GPDR27CBALT | GPDR27CBALT | 2.7mm | 31.2mm | 1piece | JPY: 5,660 | USD: 35.48 |
|
|
 |
61-1346-97 | GP碳化物钻头(ALT涂层，一般，Φ2.75×刀锋长度31.2×总长60 mm) GPDR275CBALT | GPDR275CBALT | 2.75mm | 31.2mm | 1piece | JPY: 6,690 | USD: 41.94 |
|
|
 |
61-1346-98 | GP碳化物钻头(ALT涂层，一般，Φ2.8×刀锋长度33.6×总长60 mm) GPDR28CBALT | GPDR28CBALT | 2.8mm | 33.6mm | 1piece | JPY: 5,660 | USD: 35.48 |
|
|
 |
61-1346-99 | GP碳化物钻头(ALT涂层，一般，Φ2.85*刀锋长度33.6 x全长60 mm) GPDR285CBALT | GPDR285CBALT | 2.85mm | 33.6mm | 1piece | JPY: 6,690 | USD: 41.94 |
|
|
 |
61-1347-01 | GP碳化物钻头(ALT涂层，一般，Φ2.9×刀锋长度33.6×总长60 mm) GPDR29CBALT | GPDR29CBALT | 2.9mm | 33.6mm | 1piece | JPY: 5,660 | USD: 35.48 |
|
|
 |
61-1347-02 | GP碳化物钻头(ALT涂层，一般，Φ2.95*刀锋长度33.6 x全长60 mm) GPDR295CBALT | GPDR295CBALT | 2.95mm | 33.6mm | 1piece | JPY: 6,690 | USD: 41.94 |
|
|
 |
61-1347-03 | GP碳化物钻头(ALT涂层，一般，Φ3.0×刀锋长度36×总长60 mm) GPDR3CBALT | GPDR3CBALT | 3mm | 36mm | 1piece | JPY: 5,150 | USD: 32.28 |
|