Showa Sokki Corporation

Chuyển Vibro　MODEL-1500B

Small vibration monitoring switch with integrated sensor, amplifier and relay.
Alarm level can be set in the range of 1~99% at 2 alarm relay contacts.

Showa Sokki Corporation

Gia tốc kế rung và sốc kỹ thuật số　MODEL-1340B

Ultra-compact, easy-to-operate impact and vibration accelerometer.
It is very small and light, so it is convenient to carry with excellent workability.

Showa Sokki Corporation

Máy đo độ nhớt DIGI-VIBRO　MODEL-1332B

Handy type portable vibrometer.
Vibration measurement is easy for anyone. Ultra-compact, simple, practical and speedy measurement.

Showa Sokki Corporation

Máy đo độ nhớt cầm tay DIGI-VIBRO (Loại đầu vào lớn)

Showa Sokki Corporation

Cáp tiếng ồn thấp 1,5m cho DIGI-VIBRO

Showa Sokki Corporation

Cáp Curl cho DIGI-VIBRO　LNC-3F-CC

A curl cable that can be used for 1332B series devices other than lightweight sensor types.
When you want to use a curl cable on the 1332B.

Showa Sokki Corporation

Nam châm cho DIGI-VIBRO

Showa Sokki Corporation

L Liên hệ Pin cho DIGI-VIBRO

Showa Sokki Corporation

3.5 cáp đầu ra phi-BNC　9803-97

Output cable for 1332B.
You can output AC from the 1332B and load it into the recorder.

Showa Sokki Corporation

Máy ghi âm Vibro　9801

It can be connected to a vibrometer for easy waveform recording.
Can be recorded on a C F card and transferred to a personal computer.

Showa Sokki Corporation

Thẻ CF　9803-73

A CF card for use with a vibro recorder. The vibro recorder cannot store vibration waveforms without a CF card.

Showa Sokki Corporation

Bộ pin　9780

Battery pack used for vibro recorder.
Vibrorecorders cannot be charged without a battery pack.

Showa Sokki Corporation

Cáp đầu ra BNC-BNC　9803-95

BNC- An output cable for a vibro recorder connected by BNC.
Since it is BNC-BNC, it can be used with other products.

Showa Sokki Corporation

Cáp đầu ra Clip-BNC　9803-96

Clip — An output cable for a vibro recorder connected by a BNC.

Showa Sokki Corporation

Bộ kết nối chuyển đổi　BNCP-C25J

Connector for converting 10-32 to BNC.

Showa Sokki Corporation

Hộp đựng máy ghi âm vibro　9782

This optional special case fits the vibro recorder set perfectly.

Showa Sokki Corporation

Phần mềm phân tích FFT　9803-90

This software enables waveform display and frequency analysis of data recorded with a Vibrorecorder or Vibroview on a personal computer.
1/3 Octave band analysis function is provided.

Showa Sokki Corporation

Cảm biến gia tốc Piezo-điện

Showa Sokki Corporation

Vibrometer Vibrometer Di động　1022A

Compact and lightweight analog meter type portable vibrometer.
Vibration measurement of rotating machinery and reciprocating machinery can be accurately performed.

Showa Sokki Corporation

Magnet cho Mini Vibro (cho 1022A)　MG-2

Magnet that can be used for 1022 A.

Showa Sokki Corporation

Cáp cảm biến Vibro mini (cho 1022A)　CA2411-1

Sensor cable for use with 1022 A.

Showa Sokki Corporation

Vibrometer cho tần số thấp Mini Vibro cho tần số thấp　1422A

Handy size, portable low frequency vibrometer from 2Hz.
Vibrometer developed for low frequency vibration measurement.

Showa Sokki Corporation

Bộ ghi Vibro (cho 1332B)　9801-T01

1332B data recording set.
Connecting to the 1332B for easy waveform recording

Showa Sokki Corporation

Chuyển đổi Vibro (gia tốc)

Showa Sokki Corporation

Cảm biến rung đầu ra AC cho PLC　2507

Standard cable is 3 meters.
Vibration sensor specialized for PLC (programmable logic controller) connection. Outputs waveform signals of vibration acceleration with high accuracy detection.

Showa Sokki Corporation

Màn hình kỹ thuật số　2590C-A11

This digital vibration monitor can be combined with vibration converter 2502 series to easily measure and monitor vibration.
It receives a signal of 4~20 mA and can be scaled.

Showa Sokki Corporation

Magnet cho chuyển đổi Vibro　MG-6

Special magnet for vibro converter 2502 series.

Showa Sokki Corporation

Bộ giám sát chuyển đổi Vibro (Gia tốc)

Showa Sokki Corporation

Bộ khuếch đại cảm biến cho PLC　9401-02

Vibration sensor amplifier developed for PLC (Pluggable Logic Controller) which aggregates IoT data.
It can be combined with various vibration sensors suitable for various applications and environments, and passes high-precision vibration waveform information to the PLC in real time.

Showa Sokki Corporation

Gia tốc kế với bộ khuếch đại tích hợp

Showa Sokki Corporation

Cáp cảm biến cho bộ khuếch đại cảm biến PLC (cho 2470 và 2479-9401) 5m

Showa Sokki Corporation

Cáp đầu ra cho bộ khuếch đại cảm biến PLC (cho 9401)　CA2153-1

This output cable connects the 9401 inch model to the PLC.

Showa Sokki Corporation

Xách tay Shaker để hiệu chuẩn　8100

It is a vibrator for easily calibrating vibration sensors and vibration meters in the field.
The vibrator, oscillator and vibrometer are compactly integrated.

Showa Sokki Corporation

Thiết bị đo rung cho thang máy　6601

Vibration measurement equipment conforming to ISO's elevator diagnostic standards.
This equipment is put on the elevator, and the data is acquired and analyzed by the PC.

Showa Sokki Corporation

Portable Balancer (tập sửa đổi một mặt)

Showa Sokki Corporation

Máy tính chỉnh sửa số dư　CAL-40

It is a small computer equipped with a special program for balance correction.
You can calculate the weight and mounting position of the balance weight simply by entering each parameter numerically according to the screen display.

Showa Sokki Corporation

Máy dò rung để theo dõi động đất　2702

It is a vibration detector for monitoring ground motion.
3 direction vector of XYZ The combined vibration acceleration is output at DC4-20 mA.

Showa Sokki Corporation

［Đã ngừng］Giám sát động đất Máy dò rung Bộ giám sát kỹ thuật số　MODEL2702D1

3 direction vector of XYZ The combined vibration acceleration is output 4-20 mA.
Display and alarm output are performed on the digital monitor 2590B.