Unika Company Limited

Lewty tấm neo cho thanh lái xe

Unika Company Limited

Junikon neo cho thanh lái xe P T-30

Unika Company Limited

Junikon neo cho thanh lái xe S D-30

Unika Company Limited

Bic một thanh lái xe chuyên dụng (SDS cơ khí)

Unika Company Limited

Bic một cao hạt chuyên dụng lái xe rod (cơ SDS)

Unika Company Limited

Big một trường hợp Bộ B C-02

Unika Company Limited

Nhựa A 165ml Loại tiêm GE-165

Unika Company Limited

Gói nhỏ nonpluvius F-425-SMP

Unika Company Limited

Gói nhỏ nonpluvius P-425 PIM-SM P

Unika Company Limited

Gói nhỏ nonpluvius PW-425-SMP

Unika Company Limited

Driving bar for Root-Cut Anchor　58C

Drive rod for route-cut anchor.
It's for hand-handling.

Unika Company Limited

Non-Plavis Stainless Steel Sara B Drill Tsuki 150 Pieces　FS-425B

Can be used for concrete without using a plug and with only a pre-hole, and can be easily installed with a normal screwdriver.
Comes with 1 vibration drill for lower hole.

Unika Company Limited

plug-less Anchor Non Plavis Stainless Steel Nabe B with Drill (150 bottles)　PS-425B

Can be used for concrete without using a plug and with only a pre-hole, and can be easily installed with a normal screwdriver.
Comes with 1 vibration drill for lower hole.

Unika Company Limited

Resin A Metal Brush 10　RA-MB10

Metal brush for cleaning holes when using adhesive anchors.
Cleaning inside concrete holes

Unika Company Limited

Metal Brush 13　RA-MB13

Metal brush for cleaning holes when using adhesive anchors.
Cleaning inside concrete holes

Unika Company Limited

Metal Brush 18　RA-MB18

Metal brush for cleaning holes when using adhesive anchors.
Cleaning inside concrete holes

Unika Company Limited

Metal Brush 28　RA-MB28

Metal brush for cleaning holes when using adhesive anchors.
Cleaning inside concrete holes

Unika Company Limited

Resin A Sleeve 10 pieces　RA-P2085

Plastic sleeve used when resin A, GE type is used for hollow base material.
Plastic sleeve used when resin A or GE type is used for hollow base material

Unika Company Limited

Resin A Push pumps　RA-PUP

Used to remove chips after drilling in concrete.
Cleaning inside concrete holes

Unika Company Limited

Junikon neo cho thanh lái xe Long SD-30S x 1000　SD30SX1000

Drive rod for Unicon anchor.
Mounted on a lightweight hammer drill and used in the hang mode.

Unika Company Limited

Junikon neo cho thanh lái xe Long SD-30S x 500　SD30SX500

Drive rod for Unicon anchor.
Mounted on a lightweight hammer drill and used in the hang mode.

Unika Company Limited

Drive bar for UNICON Anchor long SD -30 x 1000　SD30X1000

Drive rod for Unicon anchor.
Mounted on a lightweight hammer drill and used in the hang mode.

Unika Company Limited

Drive bar for UNICON Anchor long SD -30 x 500　SD30X500

Drive rod for Unicon anchor.
Mounted on a lightweight hammer drill and used in the hang mode.

Unika Company Limited

SDS-MA x Bits 17.5 x 305 mm　SDSMAX17.5X305

SDS-max hammer drill exclusive bit that efficiently transmits strong striking rotational force to the cutting edge without loss.
The integrated design from the shank to the cutting edge makes it extremely powerful for through-hole and deep-hole work.

Unika Company Limited

Unicon Anchor Bucket Set　UB-01

A convenient set of Unicon anchors for use in the field.
A drill for the lower hole and a driving rod for machine driving are included in the set.

Unika Company Limited

Nhựa Một loại HC-U (loại nổi bật) HC-10 U

Unika Company Limited

Nhựa A Loại SE (loại viên nang niêm phong) S E-10

Unika Company Limited

Khóa bảng Xóa gói B-405　B-405

Since the wall is pressed from both inside and outside, it is firmly fixed to the hollow structural wall.
On the back side of the hollow structural wall, the plate part of the presser bends in two stages, thereby exhibiting more stable strength than conventional products.

Unika Company Limited

Khóa bảng Xóa gói B-409　B-409

Since the wall is pressed from both inside and outside, it is firmly fixed to the hollow structural wall.
On the back side of the hollow structural wall, the plate part of the presser bends in two stages, thereby exhibiting more stable strength than conventional products.

Unika Company Limited

Khóa bảng Xóa gói B-416　B-416

Since the wall is pressed from both inside and outside, it is firmly fixed to the hollow structural wall.
On the back side of the hollow structural wall, the plate part of the presser bends in two stages, thereby exhibiting more stable strength than conventional products.

Unika Company Limited

Khóa bảng Xóa gói B-423　B-423

Since the wall is pressed from both inside and outside, it is firmly fixed to the hollow structural wall.
On the back side of the hollow structural wall, the plate part of the presser bends in two stages, thereby exhibiting more stable strength than conventional products.

Unika Company Limited

Khóa bảng Xóa gói B-427　B-427

Since the wall is pressed from both inside and outside, it is firmly fixed to the hollow structural wall.
On the back side of the hollow structural wall, the plate part of the presser bends in two stages, thereby exhibiting more stable strength than conventional products.

Unika Company Limited

Khóa bảng Xóa gói B-438　B-438

Since the wall is pressed from both inside and outside, it is firmly fixed to the hollow structural wall.
On the back side of the hollow structural wall, the plate part of the presser bends in two stages, thereby exhibiting more stable strength than conventional products.

Unika Company Limited

Lớn một neo Bucket Set BB-03　BB-03

This is a convenient set of Big One anchors for suspension mounting.
A drill for the lower hole and a driving rod for machine driving are included in the set.

Unika Company Limited

Nonpluvius tấm thép không gỉ B khoan lê FS-525DN　FS-525DN

Can be used for concrete without using a plug and with only a pre-hole, and can be easily installed with a normal screwdriver.
Various types of installation such as piping saddle fasteners, switch boxes, curtain rails, storage shelves, air conditioning equipment, lighting fixtures, and interior backing materials.

Unika Company Limited

Mũi khoan bạc không khói B Mũi khoan lê P-535SDN　P-535-SDN

Can be used for concrete without using a plug and with only a pre-hole, and can be easily installed with a normal screwdriver.
Various types of installation such as piping saddle fasteners, switch boxes, curtain rails, storage shelves, air conditioning equipment, lighting fixtures, and interior backing materials.

Unika Company Limited

Mũi khoan bạc không khói B Mũi khoan lê P-545SDN　P-545-SDN

Can be used for concrete without using a plug and with only a pre-hole, and can be easily installed with a normal screwdriver.
Various types of installation such as piping saddle fasteners, switch boxes, curtain rails, storage shelves, air conditioning equipment, lighting fixtures, and interior backing materials.

Unika Company Limited

Mũi khoan bạc không khói B Mũi khoan lê P-560SDN　P-560-SDN

Can be used for concrete without using a plug and with only a pre-hole, and can be easily installed with a normal screwdriver.
Various types of installation such as piping saddle fasteners, switch boxes, curtain rails, storage shelves, air conditioning equipment, lighting fixtures, and interior backing materials.

Unika Company Limited

Mũi khoan bạc không khói B Mũi khoan lê P-570SDN　P-570-SDN

Can be used for concrete without using a plug and with only a pre-hole, and can be easily installed with a normal screwdriver.
Various types of installation such as piping saddle fasteners, switch boxes, curtain rails, storage shelves, air conditioning equipment, lighting fixtures, and interior backing materials.

Unika Company Limited

无PS-525DN不锈钢锅B钻　PS-525DN

Can be used for concrete without using a plug and with only a pre-hole, and can be easily installed with a normal screwdriver.
Various types of installation such as piping saddle fasteners, switch boxes, curtain rails, storage shelves, air conditioning equipment, lighting fixtures, and interior backing materials.