TAIYO ELECTRIC IND.CO.,LTD. (goot)

Ở nhiệt độ loại hàn sắt　RX-711AS

Excellent heat recovery during continuous work.
Ultra-light and ultra-fine grip with reduced temperature rise in the grip.

TAIYO ELECTRIC IND.CO.,LTD. (goot)

PX-601/601 AS Thay thế đầu hàn B

TAIYO ELECTRIC IND.CO.,LTD. (goot)

Chì miễn phí 2 miếng cho nhiệt độ kết nối hàn sắt　RX-822AS

Two optimal tips for different tasks can be standby at the same time.
You can set the temperature individually for two bottles. Since the temperature display is independent, you can check the setting status at a glance.

TAIYO ELECTRIC IND.CO.,LTD. (goot)

Chì hàn miễn phí tương ứng, tự động hàn Feeder

TAIYO ELECTRIC IND.CO.,LTD. (goot)

Ở N2　NC-100R

Production and Control of Nitrogen Gas (N2): A Compact Nitrogen Station Integrating a Nitrogen Generator and Controller

TAIYO ELECTRIC IND.CO.,LTD. (goot)

Bút trung chuyển (Φ0.6-1.0 hàn)

TAIYO ELECTRIC IND.CO.,LTD. (goot)

无铅焊锡对应片横焊环焊铁　RX-812AS

A new grip designed to fit the φ2.9 ultra-fine tip (RX-81HRT series) suitable for fine soldering.
It can be used in about 4 seconds after the power is turned on. (350°C setting) • Micro soldering only The RX-81HRT series trowel tip can also be used with the 80 W RX-80HRT series trowel tip.

TAIYO ELECTRIC IND.CO.,LTD. (goot)

交换焊接尖端型0.5 dRX-812AS/802AS　RX-81HRT-0.5D

A very fine tip of φ2.9 suitable for fine soldering.

TAIYO ELECTRIC IND.CO.,LTD. (goot)

交换焊接尖端型0.6 cRX-812AS/802AS　RX-81HRT-0.6C

A very fine tip of φ2.9 suitable for fine soldering.

TAIYO ELECTRIC IND.CO.,LTD. (goot)

交换焊嘴1.5 k型RX-812AS/802AS　RX-81HRT-1.5K

A very fine tip of φ2.9 suitable for fine soldering.

TAIYO ELECTRIC IND.CO.,LTD. (goot)

交换焊嘴类型BRX-812AS/802AS　RX-81HRT-B

A very fine tip of φ2.9 suitable for fine soldering.

TAIYO ELECTRIC IND.CO.,LTD. (goot)

交换焊接接头SB型RX-812AS/802AS　RX-81HRT-SB

A very fine tip of φ2.9 suitable for fine soldering.

TAIYO ELECTRIC IND.CO.,LTD. (goot)

交换焊接接头SBJ型RX-812AS/802AS　RX-81HRT-SBJ

A very fine tip of φ2.9 suitable for fine soldering.

TAIYO ELECTRIC IND.CO.,LTD. (goot)

Mẹo hàn thay thế SI cho PX6.7/RX7/CXR　PX-60RT-SI

TAIYO ELECTRIC IND.CO.,LTD. (goot)

Mẹo hàn trao đổi

TAIYO ELECTRIC IND.CO.,LTD. (goot)

RX -812 LÀ xử lý　RX-81GAS

This trowel section is recommended for micro soldering that can have the leading edge of the grip.

TAIYO ELECTRIC IND.CO.,LTD. (goot)

［Đã ngừng］Vòi phun Φ0.6/0. 65 hàn　FD-110N-0.6

The Teflon tube is inside, so the flux is hard to stick.
Nozzle for automatic solder feeder (FD-100/110).

TAIYO ELECTRIC IND.CO.,LTD. (goot)

［Đã ngừng］Vòi phun Φ0.8/1. 0 Hàn　FD-110N-1.0

The Teflon tube is inside, so the flux is hard to stick.
Nozzle for automatic solder feeder (FD-100/110).

TAIYO ELECTRIC IND.CO.,LTD. (goot)

［Đã ngừng］Vòi phun Φ1.2/1 6 hàn　FD-110N-1.6

The Teflon tube is inside, so the flux is hard to stick.
Nozzle for automatic solder feeder (FD-100/110).