SparkFun

USB Type-C Breakout Board　BOB-15100

SparkFun

Amphenol FCI Clincher Connector (2 Position, Male)　COM-14195

Description
These Clincher connectors from Amphenol FCI can be used to terminate Flat Flexible Cables(FFCs)to an easy-to-use standard header. Simply insert the end of the cable into the connector and press it closed. The teeth inside the connector will "clinch" around the conductors and break them out to two male 0.1" spaced pin headers!

SparkFun

SOIC TO DIP ADAPTER 8PIN1=4PCS　BOB-13655

Description
The SparkFun 8-Pin SOIC to DIP Adapter is a small PCB that lets you adapt SOIC packages into a DIP footprint. These tiny boards are useful for modding and upgrading devices that use 8-pin DIP ICs, when the upgraded IC is only available in a SOIC footprint. You can also use these adapters for prototyping by making SOIC packages compatible with solderless breadboards.

SparkFun

Ultrasonic distance sensor　SEN-15569

Description
This is the HC-SR04 ultrasonic distance sensor. This economical sensor provides 2cm to 400cm of non-contact measurement functionality with a ranging accuracy that can reach up to 3mm. Each HC-SR04 module includes an ultrasonic transmitter, a receiver and a control circuit.

SparkFun

SAMD21 MINI BREAKOUT ATSAMD21G18　DEV-13664

Description
If you're ready to step your Arduino game up from older 8-bit/16MHz microcontrollers, the SparkFun SAMD21 Mini Breakout is a great landing spot. The SAMD21 Mini Breakout is a Pro Mini-sized breakout for the Atmel ATSAMD21G18, a 32-bit ARM Cortex-M0+ processor with 256KB flash, 32KB SRAM, and an operating speed of up to 48MHz. This mini breakout provides you with an Arduino hardware option that solves the problems of low storage limits and dynamic memory stack overflows that have plagued the previous iterations of the Arduino family. Yes, the SparkFun SAMD21 Mini Breakout is even fully supported in the Arduino IDE and libraries for the Arduino Zero!

SparkFun

motor driver　ROB-14451

Description
The TB6612FNG Motor Driver can control up to two DC motors at a constant current of 1.2A(3.2A peak). Two input signals(IN1 and IN2)can be used to control the motor in one of four function modes:CW, CCW, short-brake and stop. The two motor outputs(A and B)can be separately controlled, and the speed of each motor is controlled via a PWM input signal with a frequency up to 100kHz. The STBY pin should be pulled high to take the motor out of standby mode.

SparkFun

step-down DC/DC converter (5V/3A)　COM-18375

A step-down DC/DC converter that inputs 8 V to 12 V DC and outputs 5 V/3 A (maximum).
It provides excellent thermal performance and protection to power USB and 5V devices during input changes (battery charge/discharge).

SparkFun

Boosting DC/DC Converter (12 V/3 A)　COM-18376

This is an industrial-grade step-up DC/DC converter that inputs 8 V to 40 V DC and outputs 12 V/3 A (maximum).
It features a large heat sink and protection to provide stable power to loads (such as 12 V routers and Wi-Fi devices) during input changes (battery charge/discharge).

SparkFun

SparkFun Multiplexer Breakout - 8 Channel (74HC4051)　BOB-13906

Description
The SparkFun Multiplexer Breakout provides access to all pins and features of the 74HC4051, an 8-channel analog multiplexer/demultiplexer. The 74HC4051 allows you to turn four I/O pins into eight multifunctional, individually selectable signals, which can be used to do everything from driving eight LEDs to monitoring eight potentiometers.

SparkFun

FPC Camera Connector - 24-Pin, 0.5mm (Bottom-Contact)　COM-16305

Description
Amphenol FCI FFC/FPC Flexible Circuit Connectors are a broad range of innovative connector solutions to terminate FFC/FPC. This 24-Pin FPC connector has a 0.5mm pitch and comes with a bottom contact in a right angle orientation and a surface mount termination. This connector has a current rating of 500mA and a voltage rating of 50V. These 0.5mm pitch connectors provide a cost-effective, higher pin count flex connector solution. A traditional sliding actuator secures the cable.

SparkFun

SMD LED - RGB WS2812B (Whole Reel)

SparkFun

555 Timer　COM-16473

Description
This is a common 555 timer/oscillator from TI. A classic for all of those first year circuits projects where you need to blink an LED, generate tone, and thousands of other great beginning projects. Google around for a huge list of resources and example projects.

SparkFun

Silicone Bumpers - 5x11mm (4 Pack)　COM-17736

Description
Protect your board or project with this four pack of silicone bumpers! Rubber feet raise your PCB or project up off your desk. This helps prevent short circuiting from bits of scrap wire floating about or setting a project down on a conductive surface. They also prevent your enclosure or PCB from sliding around. They can also be used as feet for enclosures.

SparkFun

Resistor 220 Ohm 1/4th Watt PTH　COM-17994

Description
This is a 220 Ohm, 1/4th Watt, +/- 5% tolerance PTH resistor. Commonly used in breadboards and perf boards. We've opted for a new and more breadboard-friendly lead thickness(they're a bit thicker than our last ones).

SparkFun

SparkFun Qwiic LED Stick - APA102C　COM-18354

Description
The SparkFun Qwiic LED Stick features ten addressable APA102 LEDs, making it easy to add full color LED control using I2C. Write to individual LEDs to display a count in binary, or write to the whole strip for cool lighting effects. You can even add more LEDs to the end if you need to. We've written an Arduino library and Python package that take care of the I2C and communication to the LEDs so all you have to do is decide what color each LED should be.

SparkFun

Jumper Wires Premium 4" M/M - 26 AWG (30 Pack)　PRT-14284

Description
These are 101mm long 26AWG jumpers with male connectors on both ends. Use these to jumper from any female header on any board to any other female header. Combine these with our female-to-female jumpers to create a male-to-female jumper. Multiple jumpers can be installed next to one another on a 0.1" header.

SparkFun

High Bonding Gasket for 1.2 Watt Solar Panels　PRT-18727

Description
With this high-strength, acrylic gasket, you will be able to attach the 1.2W panels(P124)to an enclosure or almost any other flat surface. The gasket creates a waterproof and secure connection between the panel and a wide variety of materials including plastic and aluminum.

SparkFun

High Bonding Gasket for 0.3 Watt Solar Panels　PRT-18728

Description
With this high-strength, acrylic gasket, you will be able to attach the 0.3W panels(0.3 Watt, 2 Volt and 0.3 Watt, 6 Volt)to an enclosure or almost any other flat surface. The gasket creates a waterproof and secure connection between the panel and a wide variety of materials including plastic and aluminum.

SparkFun

SparkFun SIM Card Socket Breakout　BOB-00573

SIM Card Socket Breakout is a breakout board for SIM sockets.
This board is designed for SIM sockets with a switch for card detection, but since we are using sockets without this capability, pins SW1 and SW2 are NC.

SparkFun

Electrolytic Decoupling Capacitors - 100μF/25V　COM-00096

Electrolytic decoupling capacitors 100uF/25V. These capacitors are great transient/surge suppressors. Attach one between the power and ground of your project to ensure smooth power delivery. High quality radial electrolytic capacitors.

SparkFun

LED - RGB Clear Common Cathode　COM-00105

These 5mm units have four pins - Cathode is the longest pin. One for each color and a common cathode. Use this one LED for three status indicators or pulse width modulate all three and get mixed colors!
Note

SparkFun

Voltage Regulator - 5V　COM-00107

This is the basic L7805 voltage regulator, a three-terminal positive regulator with a 5 V fixed output voltage. This fixed regulator provides a local regulation, internal current limiting, thermal shutdown control, and safe area protection for your project. Each one of these voltage regulators can output a max current of 1.5A.

SparkFun

16 Channel Multiplexer　COM-00299

SparkFun

Voltage Regulator - 3.3V　COM-00526

SparkFun

Voltage Regulator - Adjustable　COM-00527

SparkFun

LED - Super Bright Red　COM-00528

SparkFun

LED - Super Bright Blue　COM-00529

SparkFun

LED - Super Bright Yellow　COM-00530

SparkFun

LED - Super Bright White　COM-00531

SparkFun

LED - Basic Yellow 3mm　COM-00532

SparkFun

LED - Basic Red 3mm　COM-00533

SparkFun

Voltage Regulator - Adjustable LM1117 SMD　COM-00595

SparkFun

Capacitor Ceramic 0.1μF　COM-08375

SparkFun

Resistor 330 Ohm 1/6th Watt PTH　COM-08377

SparkFun

7-Segment Display - 6.5inch(Red)　COM-08530

SparkFun

7-Segment Display - LED(Red)　COM-08546

SparkFun

Capacitor Ceramic 22pF　COM-08571

SparkFun

Super Bright LED - Blue 10mm　COM-08860

SparkFun

Super Bright LED - Green 10mm　COM-08861

SparkFun

Super Bright LED - Red 10mm　COM-08862