คุณลักษณะ

• Even if the bottom strainer is clogged by the action of suction side rubber bellows, suction cover can absorb water from side slits.
• The impeller is made of water-resistant special urethane rubber and has about 3 times the wear resistance of FCD700. In addition, it has a characteristic that the performance does not deteriorate even if the impeller wears out.
• With the low water level bottom design, water pumping is possible if there is 10 mm of water from the pump bottom. It drains even a small amount of water. (No priming type)
• Since the bottom part is integrally formed of synthetic rubber from the pump casing to the stand part, it does not damage the floor and absorbs shock to the body.
• Light materials such as aluminum die-cast, abrasion-resistant special synthetic rubber, and water-resistant special urethane rubber are used everywhere for a light and strong design.
• The shape design does not fall even when the pump is turned upside down. The pump section can be maintained without removing the impeller with 1 13 mm box wrench.
• Electrode type automatic type (LSRE type). (A)Automatic operation is possible just by connecting the power. (B)A completely new control system has been adopted to prevent noise caused by continuous drought operation. An automatic operation system that combines liquid level detection, high-sensitivity electrodes, and a timer function to prevent malfunction due to ruffling. This system is particularly effective at night in residential areas. The pump starts when the water level rises and the two electrodes are immersed in water. Then, when the water level falls and the water surface is separated from the electrodes, the timer operates and the pump stops after about one minute of operation.
• For floor water drainage in general construction work.
• For drainage of low water residual water in manholes, pits and water tanks.
• For general residual water drainage.
• Representative images are used.