69-2995-61 Submerged High Spin Pump Discharge Diameter 50 0.4 kW HS2.4-53
คุณลักษณะ
- This is a popular type of spiral casing that takes into account the cross section through which foreign matter passes, and can be used even in severe sites.
- Light materials such as aluminum die-cast and water-resistant special urethane rubber are used everywhere for a light and strong design.
- The use of high-spin-type impellers with a high-gap structure makes them more resistant to wear and less prone to performance degradation.
- Designed with less (locking) due to sand, etc. The motor has plenty of room, allowing continuous operation of air exposure.
- Like the LB type, it is designed for easy maintenance.
- Electrode type automatic type (HSE type). (A)Automatic operation is possible just by connecting the power. (B)A completely new control system has been adopted to prevent noise caused by continuous drought operation. An automatic operation system that combines liquid level detection, high-sensitivity electrodes, and a timer function to prevent malfunction due to ruffling. This system is particularly effective at night in residential areas. The pump starts when the water level rises and the two electrodes are immersed in water. Then, when the water level falls and the water surface is separated from the electrodes, the timer operates and the pump stops after about one minute of operation.
- For drainage of general civil engineering and construction work.
- For drainage of rainwater, spring water and standing water.
- For drainage of basements and various pits.
- For general pumping and drainage.
- Representative images are used.
ข้อมูลจําเพาะ
- Discharge Diameter (mm): 50
- Power (kW): 0.4
- Phase/Voltage (V): Three-phase 200
- Total lift (m): 8
- Discharge rate (m3/min): 0.1
- Starting Method: Screwed
- Mass (kg): 10.8
- Foreign matter passing diameter (mm): 7
- Cap Tire Cable/Material: VCT
- Cap Tire Cable, Number of Core x Cross Section (mm2): 4 x 1.25
- Cap Tire Cable/Finished Outer Diameter (mm): 11.1
- Captire Cable Length (m): 5
- Dimension d (mm): 50
- Dimension A (mm): 241
- Dimension A1 (mm): 110
- Dimension B (mm): 158
- Dimension B1 (mm): 84
- Dimension D (mm): 184
- Dimension H (mm): 328
- Dimension W1 (mm): 90
| หมายเลขใบสั่ง | 69-2995-61 | |
|---|---|---|
| หมายเลขแบบจําลอง | HS2.4-53 | |
| รหัส JAN | 4944792112779 | |
| ราคามาตรฐาน |
JPY: 70,700
USD: 443.18
Excange rate 1USD= 159.53JPY
Valid price in Japan |
|
| ปริมาณ | 1piece | |
| หุ้นในประเทศญี่ปุ่น |
|
|
| หุ้นซัพพลายเออร์ |
|
|
ผลิตภัณฑ์ที่เกี่ยวข้อง (ขนาดที่แตกต่างกัน, ข้อมูลจําเพาะ,ผลิตภัณฑ์ตัวเลือก ฯลฯ)
| รูปภาพผลิตภัณฑ์ | หมายเลขใบสั่ง | ชื่อ | หมายเลขแบบจําลอง | ปริมาณ | ราคามาตรฐาน | ราคาที่ถูกต้องในประเทศญี่ปุ่น | หุ้น [หุ้นซัพพลายเออร์] |
|
|---|---|---|---|---|---|---|---|---|
![]() |
69-2995-61 | Submerged High Spin Pump Discharge Diameter 50 0.4 kW HS2.4-53 | HS2.4-53 | 1piece | JPY: 70,700 | USD: 443.18 |
|
|
![]() |
69-2995-68 | Submerged High Spin Pump Discharge Diameter 50 0.75 kW KTV2.75-61 | KTV2.75-61 | 1piece | JPY: 138,000 | USD: 865.04 |
|
|
![]() |
69-2995-71 | Submerged High Spin Pump Discharge Diameter 50 0.75 kW 50PUA2.75-53 | 50PUA2.75-53 | 1piece | JPY: 120,000 | USD: 752.21 |
|
|
![]() |
69-2995-73 | Submerged High Spin Pump Discharge Diameter 50 0.48 kW LSRE2.4S-51 | LSRE2.4S-51 | 1piece | JPY: 123,000 | USD: 771.02 |
|




