ข้อมูลจําเพาะ

• Processing inlet air volume (m^3/min): dew point -20°C/0.8, dew point -40°C/0.68
• Processing outlet air volume (m^3/min): dew point -20°C/0.68, dew point -40°C/0.56
• Processing and regeneration air volume (m^3/min): 0.12
• Weight: 26.5 kg
• Connection Diameter (Air Inlet/Outlet): Rc3/4
• Connection Diameter (Regenerative Air Outlet): Rc1/2
• Fluid Used: Compressed Air
• Working (gauge) pressure: 0.39~1.0 MPa
• Ambient temperature: 2~40°C
• Input air temperature humidity: 5~50°C saturation or less (no drain water)
• Power: Single phase 100~230 V 50/60Hz
• Dimensions: 163 x 430 x 680 mm
• Accessory Inlet Filter Element: MSF150D/EMS150 H
• Attached Outlet Filter Element: LSF150B/ELS150
• Dew point display (digital display): 5°C unit
• Energy-saving dew point sensor: Yes
• Energy saving dew point setting function: -40°C~0°C (10°C unit)
• *The amount of processed air is converted to the suction condition of the air compressor. (Atmospheric pressure, 32 degrees C, 75%)
• *The treatment conditions were as follows: inlet air temperature humidity: 35°C/saturation or less (no water droplets), inlet air pressure (gauge pressure): 0.7 MPa, ambient temperature: 32°C.
• *If the unit is operated continuously for 24 hours, it is recommended to install a refrigeration dryer in the front stage or use air treated by a refrigeration dryer.
• *If the machine is operated continuously for 24 hours, install a backup machine just in case.
• *We can also make other specifications, so please ask us separately.
• *The sensor may deteriorate if it is used or stored in the following atmosphere. (Organic gases, acetic acid, ammonia chloride, ethyl acetate, xylene, butanol, dichloroethane)
• *Be sure to check the piping system design standards in the product specifications before installation.
• *When the inlet air temperature is 6°C or more higher than the ambient temperature, be sure to install an aftercooler (optional) or a refrigeration air dryer.
• *Be sure to install an air tank in front of the air dryer.
•